diff mbox series

[1/7] arm64: dts: qcom: sm8450: add PCIe0 PHY node

Message ID 20220301061500.2110569-2-dmitry.baryshkov@linaro.org
State Accepted
Commit d41a72c24ce3fdbbc75d13e90700d6878cbad49c
Headers show
Series [1/7] arm64: dts: qcom: sm8450: add PCIe0 PHY node | expand

Commit Message

Dmitry Baryshkov March 1, 2022, 6:14 a.m. UTC 
Add device tree node for the first PCIe PHY device found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 42 ++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 934e29b9e153..38ff1bb532cd 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -683,8 +683,12 @@  gcc: clock-controller@100000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clock-names = "bi_tcxo", "sleep_clk";
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&pcie0_lane>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "pcie_0_pipe_clk",
+				      "sleep_clk";
 		};
 
 		qupv3_id_0: geniqup@9c0000 {
@@ -750,6 +754,40 @@  i2c14: i2c@a98000 {
 			};
 		};
 
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x200>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: lanes@1c06200 {
+				reg = <0 0x1c06e00 0 0x200>, /* tx */
+				      <0 0x1c07000 0 0x200>, /* rx */
+				      <0 0x1c06200 0 0x200>, /* pcs */
+				      <0 0x1c06600 0 0x200>; /* pcs_pcie */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm8450-config-noc";
 			reg = <0 0x01500000 0 0x1c000>;