@@ -249,7 +249,7 @@ qusb_phy_0: qusb@79000 {
#phy-cells = <0>;
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
- <&xo>;
+ <&xo>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
@@ -265,11 +265,11 @@ pcie_phy: phy@84000 {
ranges;
clocks = <&gcc GCC_PCIE0_AUX_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>;
+ <&gcc GCC_PCIE0_AHB_CLK>;
clock-names = "aux", "cfg_ahb";
resets = <&gcc GCC_PCIE0_PHY_BCR>,
- <&gcc GCC_PCIE0PHY_PHY_BCR>;
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
reset-names = "phy",
"common";
@@ -319,8 +319,8 @@ crypto: crypto@73a000 {
compatible = "qcom,crypto-v5.1";
reg = <0x0 0x0073a000 0x0 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
- <&gcc GCC_CRYPTO_AXI_CLK>,
- <&gcc GCC_CRYPTO_CLK>;
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_CLK>;
clock-names = "iface", "bus", "core";
dmas = <&cryptobam 2>, <&cryptobam 3>;
dma-names = "rx", "tx";
@@ -425,7 +425,7 @@ blsp1_uart3: serial@78b1000 {
reg = <0x0 0x078b1000 0x0 0x200>;
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
+ <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
@@ -438,7 +438,7 @@ blsp1_spi1: spi@78b5000 {
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
+ <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
dma-names = "tx", "rx";
@@ -453,7 +453,7 @@ blsp1_spi2: spi@78b6000 {
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
+ <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
dma-names = "tx", "rx";
@@ -511,8 +511,8 @@ qpic_nand: nand-controller@79b0000 {
clock-names = "core", "aon";
dmas = <&qpic_bam 0>,
- <&qpic_bam 1>,
- <&qpic_bam 2>;
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
dma-names = "tx", "rx", "cmd";
pinctrl-0 = <&qpic_pins>;
pinctrl-names = "default";
@@ -527,13 +527,13 @@ usb3: usb@8af8800 {
ranges;
clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
- <&gcc GCC_USB0_MASTER_CLK>,
- <&gcc GCC_USB0_SLEEP_CLK>,
- <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
- "core",
- "sleep",
- "mock_utmi";
+ "core",
+ "sleep",
+ "mock_utmi";
assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
<&gcc GCC_USB0_MASTER_CLK>,
@@ -568,10 +568,10 @@ intc: interrupt-controller@b000000 {
#size-cells = <2>;
interrupt-controller;
#interrupt-cells = <0x3>;
- reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/
- <0x0 0x0b002000 0x0 0x1000>, /*GICC*/
- <0x0 0x0b001000 0x0 0x1000>, /*GICH*/
- <0x0 0x0b004000 0x0 0x1000>; /*GICV*/
+ reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/
+ <0x0 0x0b002000 0x0 0x1000>, /*GICC*/
+ <0x0 0x0b001000 0x0 0x1000>, /*GICH*/
+ <0x0 0x0b004000 0x0 0x1000>; /*GICV*/
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
ranges = <0 0 0 0xb00a000 0 0xffd>;
Some properties were not indented consistently. Fix that. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 40 +++++++++++++-------------- 1 file changed, 20 insertions(+), 20 deletions(-)