| Message ID | 20230125104520.89684-10-quic_kathirav@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | [01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl | expand |
Thanks Konrad for taking time to review the patch. On 1/26/2023 3:29 AM, Konrad Dybcio wrote: > > On 25.01.2023 11:45, Kathiravan Thirumoorthy wrote: >> From: Kathiravan T <quic_kathirav@quicinc.com> >> >> Add initial device tree support for the Qualcomm IPQ5332 SoC and >> MI01.2 board. >> >> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++ >> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++ >> 3 files changed, 345 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 3e79496292e7..fbd5bc583a9b 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb >> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb >> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb >> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts >> new file mode 100644 >> index 000000000000..7984d8f824ce >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts >> @@ -0,0 +1,71 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * IPQ5332 AP-MI01.2 board device tree source >> + * >> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq5332.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2"; >> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332"; >> + >> + aliases { >> + serial0 = &blsp1_uart0; >> + }; >> + >> + chosen { >> + stdout-path = "serial0"; >> + }; >> +}; >> + >> +&blsp1_uart0 { >> + pinctrl-0 = <&serial_0_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&sdhc { >> + pinctrl-0 = <&sdc_default_state>; >> + pinctrl-names = "default"; >> + non-removable; >> + status = "okay"; >> +}; >> + >> +&sleep_clk { >> + clock-frequency = <32000>; >> +}; >> + >> +&xo_board { >> + clock-frequency = <24000000>; >> +}; >> + >> +/* PINCTRL */ >> + >> +&tlmm { >> + sdc_default_state: sdc-default-state { >> + clk-pins { >> + pins = "gpio13"; >> + function = "sdc_clk"; >> + drive-strength = <8>; >> + bias-disable; >> + }; >> + >> + cmd-pins { >> + pins = "gpio12"; >> + function = "sdc_cmd"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + >> + data-pins { >> + pins = "gpio8", "gpio9", "gpio10", "gpio11"; >> + function = "sdc_data"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi >> new file mode 100644 >> index 000000000000..d04244a3cd3a >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi >> @@ -0,0 +1,273 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * IPQ5332 device tree source >> + * >> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h> >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> +/ { >> + interrupt-parent = <&intc>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + clocks { >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + >> + xo_board: xo-board-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x0>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + CPU1: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x1>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + CPU2: cpu@2 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x2>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + CPU3: cpu@3 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x3>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + L2_0: l2-cache { >> + compatible = "cache"; >> + cache-level = <0x2>; >> + }; >> + }; >> + >> + firmware { >> + scm { >> + compatible = "qcom,scm-ipq5332", "qcom,scm"; >> + }; >> + }; >> + >> + memory@40000000 { >> + device_type = "memory"; >> + /* We expect the bootloader to fill in the size */ >> + reg = <0x0 0x40000000 0x0 0x0>; >> + }; >> + >> + pmu { >> + compatible = "arm,cortex-a53-pmu"; >> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; >> + }; >> + >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + tz: memory@4a600000 { > memory@ is discouraged, the node name should be somewhat > descriptive of what lies in this reserved region. On the > other hand, tz: sounds like a label to a trust zone device > of some kind. I propose: > > tz_mem: tz@4a600000 { > > instead. Ack. > >> + no-map; >> + reg = <0x0 0x4a600000 0x0 0x200000>; >> + }; >> + }; >> + >> + soc@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0 0 0 0xffffffff>; >> + compatible = "simple-bus"; > Move compatible first, please. Ack. > >> + >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq5332-tlmm"; >> + reg = <0x01000000 0x300000>; >> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 53>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + serial_0_pins: serial0-state { > You may be interested in having a suspend state for this > one, so you may wish to rename this futureproofing-ly to > serial0-active-state. Ack. AFAIK, we don't support suspend state, anyways let me got back and check it. > >> + pins = "gpio18", "gpio19"; >> + function = "blsp0_uart0"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + }; >> + >> + gcc: clock-controller@1800000 { >> + compatible = "qcom,ipq5332-gcc"; >> + reg = <0x01800000 0x80000>; >> + #clock-cells = <0x1>; >> + #reset-cells = <0x1>; > Decimal values for -cells, please. Ack. > >> + #power-domain-cells = <1>; >> + clock-names = "xo", >> + "sleep_clk", >> + "pcie_2lane_phy_pipe_clk", >> + "pcie_2lane_phy_pipe_clk_x1", >> + "usb_pcie_wrapper_pipe_clk"; >> + clocks = <&xo_board>, >> + <&sleep_clk>, >> + <0>, >> + <0>, >> + <0>; >> + }; >> + >> + sdhc: mmc@7804000 { >> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5"; >> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; >> + >> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "hc_irq", "pwr_irq"; >> + >> + clocks = <&gcc GCC_SDCC1_AHB_CLK>, >> + <&gcc GCC_SDCC1_APPS_CLK>, >> + <&xo_board>; >> + clock-names = "iface", "core", "xo"; >> + mmc-ddr-1_8v; >> + mmc-hs200-1_8v; >> + max-frequency = <192000000>; > As Krzysztof pointed out, this one should go. Ack. > >> + bus-width = <4>; > Oh that's interesting.. a 4-wide bus for eMMC? Yes, eMMC is 4bit bus width with HS200 mode only. > >> + status = "disabled"; >> + }; >> + >> + blsp1_uart0: serial@78af000 { >> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; >> + reg = <0x078af000 0x200>; >> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, >> + <&gcc GCC_BLSP1_AHB_CLK>; >> + clock-names = "core", "iface"; >> + status = "disabled"; >> + }; >> + >> + intc: interrupt-controller@b000000 { >> + compatible = "qcom,msm-qgic2"; >> + #address-cells = <1>; >> + #size-cells = <1>; > Please move these two above ranges.. Ack. > >> + interrupt-controller; >> + #interrupt-cells = <0x3>; > Decimal value, please. Ack. > >> + reg = <0x0b000000 0x1000>, /* GICD */ >> + <0x0b002000 0x1000>, /* GICC */ >> + <0x0b001000 0x1000>, /* GICH */ >> + <0x0b004000 0x1000>; /* GICV */ > ..and reg just below compatible... Ack. > >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > ..and interrupts just below reg, please. Ack. > >> + ranges = <0 0x0b00c000 0x3000>; >> + >> + v2m0: v2m@0 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x0 0xffd>; > Please pad the reg for consistency. Sure. >> + msi-controller; >> + }; >> + >> + v2m1: v2m@1 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x00001000 0xffd>; >> + msi-controller; >> + }; >> + >> + v2m2: v2m@2 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x00002000 0xffd>; >> + msi-controller; >> + }; >> + }; >> + >> + timer@b120000 { >> + compatible = "arm,armv7-timer-mem"; >> + reg = <0x0b120000 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + frame@b120000 { >> + frame-number = <0>; >> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x0b121000 0x1000>, >> + <0x0b122000 0x1000>; > reg > interrupts > frame-number > > would be more consistent with most other nodes. Ack. > >> + }; >> + >> + frame@b123000 { >> + frame-number = <1>; >> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x0b123000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@b124000 { >> + frame-number = <2>; >> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x0b124000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@b125000 { >> + frame-number = <3>; >> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x0b125000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@b126000 { >> + frame-number = <4>; >> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x0b126000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@b127000 { >> + frame-number = <5>; >> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x0b127000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@b128000 { >> + frame-number = <6>; >> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x0b128000 0x1000>; >> + status = "disabled"; >> + }; >> + }; >> + >> + }; >> + >> + timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > The indentation seems off here. Will fix it in V2. Thanks. > > Konrad >> + }; >> +};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 3e79496292e7..fbd5bc583a9b 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts new file mode 100644 index 000000000000..7984d8f824ce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ5332 AP-MI01.2 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2"; + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + non-removable; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi new file mode 100644 index 000000000000..d04244a3cd3a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -0,0 +1,273 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,gcc-ipq5332.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq5332", "qcom,scm"; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz: memory@4a600000 { + no-map; + reg = <0x0 0x4a600000 0x0 0x200000>; + }; + }; + + soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5332-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 53>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_0_pins: serial0-state { + pins = "gpio18", "gpio19"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq5332-gcc"; + reg = <0x01800000 0x80000>; + #clock-cells = <0x1>; + #reset-cells = <0x1>; + #power-domain-cells = <1>; + clock-names = "xo", + "sleep_clk", + "pcie_2lane_phy_pipe_clk", + "pcie_2lane_phy_pipe_clk_x1", + "usb_pcie_wrapper_pipe_clk"; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <192000000>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +};