@@ -115,6 +115,7 @@ static void rockchip_pcie_prog_ep_ob_atu(struct rockchip_pcie *rockchip, u8 fn,
static int rockchip_pcie_ep_write_header(struct pci_epc *epc, u8 fn, u8 vfn,
struct pci_epf_header *hdr)
{
+ u32 reg;
struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
struct rockchip_pcie *rockchip = &ep->rockchip;
@@ -127,8 +128,9 @@ static int rockchip_pcie_ep_write_header(struct pci_epc *epc, u8 fn, u8 vfn,
PCIE_CORE_CONFIG_VENDOR);
}
- rockchip_pcie_write(rockchip, hdr->deviceid << 16,
- ROCKCHIP_PCIE_EP_FUNC_BASE(fn) + PCI_VENDOR_ID);
+ reg = rockchip_pcie_read(rockchip, PCIE_EP_CONFIG_DID_VID);
+ reg = (reg & 0xFFFF) | (hdr->deviceid << 16);
+ rockchip_pcie_write(rockchip, reg, PCIE_EP_CONFIG_DID_VID);
rockchip_pcie_write(rockchip,
hdr->revid |
@@ -133,6 +133,8 @@
#define PCIE_RC_RP_ATS_BASE 0x400000
#define PCIE_RC_CONFIG_NORMAL_BASE 0x800000
#define PCIE_RC_CONFIG_BASE 0xa00000
+#define PCIE_EP_CONFIG_BASE 0xa00000
+#define PCIE_EP_CONFIG_DID_VID (PCIE_EP_CONFIG_BASE + 0x00)
#define PCIE_RC_CONFIG_RID_CCR (PCIE_RC_CONFIG_BASE + 0x08)
#define PCIE_RC_CONFIG_DCR (PCIE_RC_CONFIG_BASE + 0xc4)
#define PCIE_RC_CONFIG_DCR_CSPL_SHIFT 18
Device ID was written to a read-only register and therefore did not work. The Device ID is now updated through the correct register. This is documented in the RK3399 TRM section 17.6.6.1.1 Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> --- drivers/pci/controller/pcie-rockchip-ep.c | 6 ++++-- drivers/pci/controller/pcie-rockchip.h | 2 ++ 2 files changed, 6 insertions(+), 2 deletions(-)