From patchwork Thu Mar 30 15:32:21 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 669220 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 74C98C6FD1D for ; Thu, 30 Mar 2023 15:33:26 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233225AbjC3PdZ (ORCPT ); Thu, 30 Mar 2023 11:33:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:32976 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233161AbjC3PdJ (ORCPT ); Thu, 30 Mar 2023 11:33:09 -0400 Received: from mail-wr1-x429.google.com (mail-wr1-x429.google.com [IPv6:2a00:1450:4864:20::429]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1BE94E187 for ; Thu, 30 Mar 2023 08:32:40 -0700 (PDT) Received: by mail-wr1-x429.google.com with SMTP id d17so19496487wrb.11 for ; Thu, 30 Mar 2023 08:32:40 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680190352; x=1682782352; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=LgkwvI+ngAxCa2UpoyFF6NGQVftW1q6IJSx2lMhiCsk=; b=yfCCt89XqyFjaRZsbjKW2JOzZ//Q2DGFWmsVjMs4V1USy/6Mfor6tUC8iFcx6OE1Xk btbo/ViNkuUb88jKguorYWZa2gl5OVQUToHHblLheXjMQJSPhPQJUtcyo5MF0l52bLLH PVTk1Dr+G9oIBJYWwbvAemET/GnIuhJe05XNXAejvC07sJhBpBjnmh6DQVz9yIRj12VO x0d/nYDnbTPQ4V0rqrTksI2EC8eyRq0J4QeB0w+X57WLt4xz8tn1UsqS/mftceKksoxg 73xee1Dtxo2kL68F703HpkUT7qj0XSMXqg8wXiIz6Hs2Tri3l/mqAWhvaOuiNotrCu0U sDDQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680190352; x=1682782352; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=LgkwvI+ngAxCa2UpoyFF6NGQVftW1q6IJSx2lMhiCsk=; b=Z/f4dbJam8iKWg8lb6pgs6s5UWF3CUPz2GPnNsp14A3CYw9NkJS46SueQiNAukc3Li vx6Uc7wXOuZ0lk+RN1z4p6i7LYt+2bTU47fsl/a/US8EXZ88pT1+yPgCFg6LSYBJ1xch A3rnr+bE/OkD/V3/Py0Yd+7DJV17xMrLUNvyPA/+HzKOjnnZAcK+AgbRva7D3tyQWhgv eymkWF6Yy+WEvdALRQDHMzL+pEbEBZqyH6ACHOuIoCM3f/kUu8OmG4NfOFi729U06k0E 1p6vAmZN2LxE5qgy39VVuX5MQhKSzluog2BwsK5phKioLFPB2p3SJ9mgmHvFUs8DoDV6 osAA== X-Gm-Message-State: AAQBX9eJH0NlYhOI+wjiAU8p6q2h1OD1AF/0Ibx3yKDG/5xMoPzdRf/U opYOQl/8y6sBfQZ80g6GGwFL4Q== X-Google-Smtp-Source: AKy350Ya5SLiQDI4Qp0/jys5485JlBkQ3++NqZeDxTHgXS7zyxtj4zgltdhFVAF5tV+EcB9Ik5+/GA== X-Received: by 2002:a05:6000:1192:b0:2c7:17a4:4ece with SMTP id g18-20020a056000119200b002c717a44ecemr18370452wrx.26.1680190352041; Thu, 30 Mar 2023 08:32:32 -0700 (PDT) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id b7-20020a5d4b87000000b002cfe0ab1246sm33151794wrt.20.2023.03.30.08.32.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 30 Mar 2023 08:32:31 -0700 (PDT) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net, Jun Nie , James Willcox , Joseph Gates , Max Chen , Zac Crosby Subject: [PATCH v8 4/5] arm64: dts: qcom: Add Square apq8039-t2 board Date: Thu, 30 Mar 2023 16:32:21 +0100 Message-Id: <20230330153222.2875121-5-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230330153222.2875121-1-bryan.odonoghue@linaro.org> References: <20230330153222.2875121-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi chipset. Co-developed-by: Shawn Guo Signed-off-by: Shawn Guo Co-developed-by: Jun Nie Signed-off-by: Jun Nie Co-developed-by: Benjamin Li Signed-off-by: Benjamin Li Co-developed-by: James Willcox Signed-off-by: James Willcox Co-developed-by: Leo Yan Signed-off-by: Leo Yan Co-developed-by: Joseph Gates Signed-off-by: Joseph Gates Co-developed-by: Max Chen Signed-off-by: Max Chen Co-developed-by: Zac Crosby Signed-off-by: Zac Crosby Reviewed-by: Konrad Dybcio Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/apq8039-t2.dts | 492 ++++++++++++++++++++++++ 2 files changed, 493 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1a29403400b70..31e0ac97fc088 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts new file mode 100644 index 0000000000000..5f68925434c81 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include +#include +#include +#include + +/ { + model = "Square, Inc. T2 Devkit"; + compatible = "square,apq8039-t2", "qcom,msm8939"; + + qcom,board-id = <0x53 0x54>; + qcom,msm-id = ; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + bl: backlight { + compatible = "gpio-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pinctrl-names = "default"; + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + vreg_lcd_avdd_reg: lcd-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avdd"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avdd_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_avee_reg: lcd-avee-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avee"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avee_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_iovcc_reg: lcd-iovcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_iovcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&pinctrl_lcd_iovcc_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; +}; + +&blsp_i2c1 { + status = "okay"; +}; + +&blsp_i2c2 { + status = "okay"; +}; + +&blsp_i2c3 { + status = "okay"; + + typec_pd: usb-pd@38 { + compatible = "ti,tps6598x"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <107 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_irq>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + typec_ep: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; +}; + +&blsp1_uart1 { + status = "okay"; +}; + +&blsp1_uart1_default { + pins = "gpio0", "gpio1"; +}; + +&blsp1_uart1_sleep { + pins = "gpio0", "gpio1"; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "PM_GPIO1", /* WIFI_GPIO1_PRE */ + "PM_GPIO2", /* WIFI_GPIO2_PRE */ + "PM_GPIO3", + "PM_GPIO4"; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3680"; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + /* l1 is fixed to 1225000, but not connected in schematic */ + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + status = "okay"; +}; + +&sound { + model = "apq8039-square-sndcard"; + audio-routing = "AMIC2", "MIC BIAS Internal2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_default>; + pinctrl-1 = <&cdc_pdm_lines_sleep>; + + internal-codec-playback-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +/* + * Line names are taken from the schematic of T2, Ver X03. + * July 14, 2018. Page 4 in particular. + */ +&tlmm { + gpio-line-names = + "APQ_UART1_TX", /* GPIO_0 */ + "APQ_UART1_RX", + "APQ_I2C1_SDA", + "APQ_I2C1_SCL", + "APQ_UART2_TX_1V8", + "APQ_UART2_RX_1V8", + "APQ_I2C2_SDA", + "APQ_I2C2_SCL", + "NC", + "APQ_LCD_IOVCC_EN", + "APQ_I2C3_SDA", /* GPIO_10 */ + "APQ_I2C3_SCL", + "TOUCH_RST_1V8_L", + "NC", + "APQ_I2C4_SDA", + "APQ_I2C4_SCL", + "APQ_ID5", + "USB_DISCONNECT", + "APQ_I2C5_SDA", + "APQ_I2C5_SCL", + "APQ_USBC_SPI_MOSI", /* GPIO_20 */ + "APQ_USBC_SPI_MISO", + "APQ_USBC_SPI_SS_L", + "APQ_USBC_SPI_CLK", + "APQ_LCD_TE0", + "APQ_LCD_RST_L", + "NC", + "NC", + "ACCELEROMETER_INT1", + "APQ_CAM_I2C0_SDA", + "APQ_CAM_I2C0_SCL", /* GPIO_30 */ + "ACCELEROMETER_INT2", + "NC", + "NC", + "NC", + "APQ_K21_RST_1V8_L", + "NC", + "APQ_EDL_1V8", + "TP145", + "BT_SSBI", + "NC", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "BT_CTRL", + "BT_DAT", + "PWR_GPIO_IN", + "PWR_GPIO_OUT", /* GPIO_50 */ + "CARD_DET_MLB_L", + "HALL_SENSOR", + "TP63", + "TP64", + "TP65", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "APQ_K21_GPIO0_1V8", + "CDC_PDM_CLK", + "CDC_PDM_SYNC", + "CDC_PDM_TX", + "CDC_PDM_RX0", + "CDC_PDM_RX1", + "CDC_PDM_RX2", + "APQ_K21_GPIO1_1V8", + "NC", /* GPIO_70 */ + "APQ_HUB_SEL_1V8", + "APQ_K21_GPIO2_1V8", + "APQ_K21_GPIO3_1V8", + "APQ_ID0", + "APQ_ID1", + "APQ_ID2", + "APQ_ID3", + "APQ_ID4", + "APQ_HUB_SUSP_IND", + "BOOT_CONFIG_0", /* GPIO_80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "APQ_LCD_AVDD_EN", + "APQ_LCD_AVEE_EN", + "TP70", + "NC", + "APQ_DEBUG0", /* GPIO_90 */ + "APQ_DEBUG1", + "APQ_DEBUG2", + "APQ_DEBUG3", + "TP165", + "NC", + "APQ_LNA_PWR_EN", + "NC", + "APQ_LCD_BL_EN", + "NC", + "APQ_LCD_ID0", /* GPIO_100 */ + "APQ_LCD_ID1", + "USBC_GPIO5_1V8", + "NC", + "NC", + "NC", + "APQ_HUB_RST_1V8_L", + "USBC_I2C_IRQ_1V8_L", + "SPE_PWR_EN", + "NC", + "APQ_USB_ID", /* GPIO_110 */ + "APQ_EXT_BUCK_VSEL", + "APQ_USB_ID_OUT", + "NC", + "PRNT_RST_L", + "APQ_CRQ_I2C_RDY_1V8", + "TYPEC_RST_1V8_H", + "CHG_BACKPWR_EN", + "CHG_PROCHOT_L", + "NC", + "USBC_GPIO7_1V8", /* GPIO_120 */ + "NC"; + + pinctrl_backlight: backlight-state { + pins = "gpio98"; + function = "gpio"; + }; + + pinctrl_lcd_avdd_reg: lcd-avdd-reg-state { + pins = "gpio86"; + function = "gpio"; + }; + + pinctrl_lcd_avee_reg: lcd-avee-reg-state { + pins = "gpio87"; + function = "gpio"; + }; + + pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state { + pins = "gpio9"; + function = "gpio"; + }; + + pinctrl_lcd_rst: lcd-rst-state { + pins = "gpio25"; + function = "gpio"; + }; + + pinctrl_otg_default: otg-default-state { + function = "gpio"; + pins = "gpio17"; + output-high; + }; + + pinctrl_otg_device: otg-device-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + pinctrl_otg_host: otg-host-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + typec_irq: typec-irq-state { + function = "gpio"; + pins = "gpio107"; + bias-pull-up; + input-enable; + }; +}; + +&usb { + pinctrl-names = "default", "host", "device"; + pinctrl-0 = <&pinctrl_otg_default>; + pinctrl-1 = <&pinctrl_otg_host>; + pinctrl-2 = <&pinctrl_otg_device>; + pin-switch-delay-us = <100000>; + usb-role-switch; + status = "okay"; + + port { + otg_ep: endpoint { + remote-endpoint = <&typec_ep>; + }; + }; +}; + +&wcd_codec { + qcom,hphl-jack-type-normally-open; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +};