| Message ID | 20230407175807.124394-3-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | ecdc2fe1204ff515f59385a87994ea17a8d0d6c4 |
| Headers | show |
| Series | [01/10] arm64: dts: qcom: msm8994: remove superfluous "input-enable" | expand |
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 8b71b1f8f300..b35e2d9f428c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -640,7 +640,6 @@ hall_sensor1_default: hall-sensor1-def-state { function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index ce03c7c239e5..062d56c42385 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -501,7 +501,6 @@ hall_sensor_default: hall-sensor-default-state { function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ts_int_active: ts-int-active-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 8e1c25b15f57..687e96068cb2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -844,7 +844,6 @@ tof_int_n: tof-int-n-state { function = "gpio"; bias-pull-up; drive-strength = <2>; - input-enable; }; chat_cam_pwr_en: chat-cam-pwr-en-default-state { @@ -873,7 +872,6 @@ acc_cover_open: acc-cover-open-state { function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index 7956b151c7a4..2444b87fddf7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -528,7 +528,6 @@ hall_sensor_default_state: hall-sensor-default-state { function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; mdss_dsi_active_state: mdss-dsi-active-state { @@ -620,7 +619,6 @@ ts_active_state: ts-active-state { function = "gpio"; drive-strength = <16>; bias-pull-up; - input-enable; }; ts_int_suspend_state: ts-int-suspend-state { @@ -642,7 +640,6 @@ wcd_int_n_state: wcd-int-n-state { function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 1 - arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 1 - arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 2 -- arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts | 3 --- 4 files changed, 7 deletions(-)