| Message ID | 20230413035541.62129-7-jack.zhu@starfivetech.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add StarFive Camera Subsystem driver | expand |
On 13/04/2023 05:55, Jack Zhu wrote: > Add the bindings documentation for Starfive JH7110 Camera Subsystem > which is used for handing image sensor data. > > Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> Subject: drop second/last, redundant "bindings for". The "dt-bindings" prefix is already stating that these are bindings. > --- > .../bindings/media/starfive,jh7110-camss.yaml | 164 ++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 171 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > > diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > new file mode 100644 > index 000000000000..4cd144f1b845 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > @@ -0,0 +1,164 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + No need for blank line. With two fixes above: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On 2023/4/15 16:59, Krzysztof Kozlowski wrote: > On 13/04/2023 05:55, Jack Zhu wrote: >> Add the bindings documentation for Starfive JH7110 Camera Subsystem >> which is used for handing image sensor data. >> >> Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> > > Subject: drop second/last, redundant "bindings for". The "dt-bindings" > prefix is already stating that these are bindings. > OK, I will fix it. Thank you. >> --- >> .../bindings/media/starfive,jh7110-camss.yaml | 164 ++++++++++++++++++ >> MAINTAINERS | 7 + >> 2 files changed, 171 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml >> >> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml >> new file mode 100644 >> index 000000000000..4cd144f1b845 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml >> @@ -0,0 +1,164 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> + > > No need for blank line. > OK, I will delete the blank line. > With two fixes above: > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Best regards, > Krzysztof >
Hi Jack, On Thu, Apr 20, 2023 at 04:51:39PM +0800, Jack Zhu wrote: > On 2023/4/19 14:15, Laurent Pinchart wrote: > > On Thu, Apr 13, 2023 at 11:55:39AM +0800, Jack Zhu wrote: > >> Add the bindings documentation for Starfive JH7110 Camera Subsystem > >> which is used for handing image sensor data. > >> > >> Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> > >> --- > >> .../bindings/media/starfive,jh7110-camss.yaml | 164 ++++++++++++++++++ > >> MAINTAINERS | 7 + > >> 2 files changed, 171 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > >> > >> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > >> new file mode 100644 > >> index 000000000000..4cd144f1b845 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > >> @@ -0,0 +1,164 @@ > >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > >> + > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Starfive SoC CAMSS ISP > >> + > >> +maintainers: > >> + - Jack Zhu <jack.zhu@starfivetech.com> > >> + - Changhuang Liang <changhuang.liang@starfivetech.com> > >> + > >> +description: > >> + The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It > >> + consists of a VIN controller (Video In Controller, a top-level control until) > >> + and an ISP. > >> + > >> +properties: > >> + compatible: > >> + const: starfive,jh7110-camss > >> + > >> + reg: > >> + maxItems: 2 > >> + > >> + reg-names: > >> + items: > >> + - const: syscon > >> + - const: isp > >> + > >> + clocks: > >> + maxItems: 7 > >> + > >> + clock-names: > >> + items: > >> + - const: apb_func > >> + - const: wrapper_clk_c > >> + - const: dvp_inv > >> + - const: axiwr > >> + - const: mipi_rx0_pxl > >> + - const: ispcore_2x > >> + - const: isp_axi > >> + > >> + resets: > >> + maxItems: 6 > >> + > >> + reset-names: > >> + items: > >> + - const: wrapper_p > >> + - const: wrapper_c > >> + - const: axird > >> + - const: axiwr > >> + - const: isp_top_n > >> + - const: isp_top_axi > >> + > >> + power-domains: > >> + items: > >> + - description: JH7110 ISP Power Domain Switch Controller. > >> + > >> + interrupts: > >> + maxItems: 4 > >> + > >> + ports: > >> + $ref: /schemas/graph.yaml#/properties/ports > >> + > >> + properties: > >> + port@0: > >> + $ref: /schemas/graph.yaml#/$defs/port-base > >> + unevaluatedProperties: false > >> + description: Input port for receiving DVP data. > >> + > >> + properties: > >> + endpoint: > >> + $ref: video-interfaces.yaml# > >> + unevaluatedProperties: false > >> + > >> + properties: > >> + bus-width: > >> + const: 8 > >> + > >> + data-shift: > >> + const: 2 > > > > As far as I can tell, those two properties are not handled by the > > driver. I assume this is because the driver doesn't support the DVP > > input yet. That's fine, but it makes it a bit hard to review the device > > tree. Could you provide some information about the DVP hardware > > interface ? Does it support both BT.656 and sync signals, or just sync > > signals ? Are the polarities of the clock and h/v sync controllable ? > > Is the parallel input bus 8-bit wide or are other options supported ? > > And finally, what are you modelling with data-shift: 2 ? > > Hello Laurent, > > The DVP hardware supports BT.656 and sync signals, can control the > polarities of h/v sync, supports 8/10/12 bit wide, and data-shift: 2 is > line 9-2. Thank you for the information. Endpoints for port@0 should then require bus-type. The hsync-active and vsync-active should be listed with default values and be optional. bus-width should have 8, 10 and 12 as supported values, and be required, or have a default (I think making it required is best). data-shift should list supported values too, including 0, and be optional with a default of 0. > >> + > >> + port@1: > >> + $ref: /schemas/graph.yaml#/properties/port > >> + description: Input port for receiving CSI data. > >> + > >> + required: > >> + - port@0 > >> + - port@1 > >> + > >> +required: > >> + - compatible > >> + - reg > >> + - reg-names > >> + - clocks > >> + - clock-names > >> + - resets > >> + - reset-names > >> + - power-domains > >> + - interrupts > >> + - ports > >> + > >> +additionalProperties: false > >> + > >> +examples: > >> + - | > >> + isp@19840000 { > >> + compatible = "starfive,jh7110-camss"; > >> + reg = <0x19840000 0x10000>, > >> + <0x19870000 0x30000>; > >> + reg-names = "syscon", "isp"; > >> + clocks = <&ispcrg 0>, > >> + <&ispcrg 13>, > >> + <&ispcrg 2>, > >> + <&ispcrg 12>, > >> + <&ispcrg 1>, > >> + <&syscrg 51>, > >> + <&syscrg 52>; > >> + clock-names = "apb_func", > >> + "wrapper_clk_c", > >> + "dvp_inv", > >> + "axiwr", > >> + "mipi_rx0_pxl", > >> + "ispcore_2x", > >> + "isp_axi"; > >> + resets = <&ispcrg 0>, > >> + <&ispcrg 1>, > >> + <&ispcrg 10>, > >> + <&ispcrg 11>, > >> + <&syscrg 41>, > >> + <&syscrg 42>; > >> + reset-names = "wrapper_p", > >> + "wrapper_c", > >> + "axird", > >> + "axiwr", > >> + "isp_top_n", > >> + "isp_top_axi"; > >> + power-domains = <&pwrc 5>; > >> + interrupts = <92>, <87>, <88>, <90>; > >> + > >> + ports { > >> + #address-cells = <1>; > >> + #size-cells = <0>; > >> + port@0 { > >> + reg = <0>; > >> + vin_from_sc2235: endpoint { > >> + remote-endpoint = <&sc2235_to_vin>; > >> + bus-width = <8>; > >> + data-shift = <2>; > >> + hsync-active = <1>; > >> + vsync-active = <0>; > >> + pclk-sample = <1>; > >> + }; > >> + }; > >> + > >> + port@1 { > >> + reg = <1>; > >> + vin_from_csi2rx: endpoint { > >> + remote-endpoint = <&csi2rx_to_vin>; > >> + }; > >> + }; > >> + }; > >> + }; > >> diff --git a/MAINTAINERS b/MAINTAINERS > >> index bbb8b5c0187b..b8c76b0d7eb3 100644 > >> --- a/MAINTAINERS > >> +++ b/MAINTAINERS > >> @@ -19909,6 +19909,13 @@ M: Ion Badulescu <ionut@badula.org> > >> S: Odd Fixes > >> F: drivers/net/ethernet/adaptec/starfire* > >> > >> +STARFIVE CAMERA SUBSYSTEM DRIVER > >> +M: Jack Zhu <jack.zhu@starfivetech.com> > >> +M: Changhuang Liang <changhuang.liang@starfivetech.com> > >> +L: linux-media@vger.kernel.org > >> +S: Maintained > >> +F: Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > >> + > >> STARFIVE DEVICETREES > >> M: Emil Renner Berthing <kernel@esmil.dk> > >> S: Maintained
diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml new file mode 100644 index 000000000000..4cd144f1b845 --- /dev/null +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Starfive SoC CAMSS ISP + +maintainers: + - Jack Zhu <jack.zhu@starfivetech.com> + - Changhuang Liang <changhuang.liang@starfivetech.com> + +description: + The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It + consists of a VIN controller (Video In Controller, a top-level control until) + and an ISP. + +properties: + compatible: + const: starfive,jh7110-camss + + reg: + maxItems: 2 + + reg-names: + items: + - const: syscon + - const: isp + + clocks: + maxItems: 7 + + clock-names: + items: + - const: apb_func + - const: wrapper_clk_c + - const: dvp_inv + - const: axiwr + - const: mipi_rx0_pxl + - const: ispcore_2x + - const: isp_axi + + resets: + maxItems: 6 + + reset-names: + items: + - const: wrapper_p + - const: wrapper_c + - const: axird + - const: axiwr + - const: isp_top_n + - const: isp_top_axi + + power-domains: + items: + - description: JH7110 ISP Power Domain Switch Controller. + + interrupts: + maxItems: 4 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Input port for receiving DVP data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-width: + const: 8 + + data-shift: + const: 2 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Input port for receiving CSI data. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - interrupts + - ports + +additionalProperties: false + +examples: + - | + isp@19840000 { + compatible = "starfive,jh7110-camss"; + reg = <0x19840000 0x10000>, + <0x19870000 0x30000>; + reg-names = "syscon", "isp"; + clocks = <&ispcrg 0>, + <&ispcrg 13>, + <&ispcrg 2>, + <&ispcrg 12>, + <&ispcrg 1>, + <&syscrg 51>, + <&syscrg 52>; + clock-names = "apb_func", + "wrapper_clk_c", + "dvp_inv", + "axiwr", + "mipi_rx0_pxl", + "ispcore_2x", + "isp_axi"; + resets = <&ispcrg 0>, + <&ispcrg 1>, + <&ispcrg 10>, + <&ispcrg 11>, + <&syscrg 41>, + <&syscrg 42>; + reset-names = "wrapper_p", + "wrapper_c", + "axird", + "axiwr", + "isp_top_n", + "isp_top_axi"; + power-domains = <&pwrc 5>; + interrupts = <92>, <87>, <88>, <90>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vin_from_sc2235: endpoint { + remote-endpoint = <&sc2235_to_vin>; + bus-width = <8>; + data-shift = <2>; + hsync-active = <1>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + vin_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_vin>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index bbb8b5c0187b..b8c76b0d7eb3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19909,6 +19909,13 @@ M: Ion Badulescu <ionut@badula.org> S: Odd Fixes F: drivers/net/ethernet/adaptec/starfire* +STARFIVE CAMERA SUBSYSTEM DRIVER +M: Jack Zhu <jack.zhu@starfivetech.com> +M: Changhuang Liang <changhuang.liang@starfivetech.com> +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml + STARFIVE DEVICETREES M: Emil Renner Berthing <kernel@esmil.dk> S: Maintained
Add the bindings documentation for Starfive JH7110 Camera Subsystem which is used for handing image sensor data. Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> --- .../bindings/media/starfive,jh7110-camss.yaml | 164 ++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 171 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml