@@ -10,7 +10,8 @@ config IIO_ST_LSM9DS0
help
Say yes here to build support for STMicroelectronics LSM9DS0 IMU
- sensor. Supported devices: accelerometer/magnetometer of lsm9ds0.
+ sensor. Supported devices: accelerometer/magnetometer of lsm9ds0
+ and lsm303d.
To compile this driver as a module, choose M here: the module
will be called st_lsm9ds0.
@@ -22,12 +22,17 @@ static const struct of_device_id st_lsm9ds0_of_match[] = {
.compatible = "st,lsm9ds0-imu",
.data = LSM9DS0_IMU_DEV_NAME,
},
+ {
+ .compatible = "st,lsm303d-imu",
+ .data = LSM303D_IMU_DEV_NAME,
+ },
{}
};
MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
static const struct i2c_device_id st_lsm9ds0_id_table[] = {
{ LSM9DS0_IMU_DEV_NAME },
+ { LSM303D_IMU_DEV_NAME },
{}
};
MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table);
@@ -22,12 +22,17 @@ static const struct of_device_id st_lsm9ds0_of_match[] = {
.compatible = "st,lsm9ds0-imu",
.data = LSM9DS0_IMU_DEV_NAME,
},
+ {
+ .compatible = "st,lsm303d-imu",
+ .data = LSM303D_IMU_DEV_NAME,
+ },
{}
};
MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
static const struct spi_device_id st_lsm9ds0_id_table[] = {
{ LSM9DS0_IMU_DEV_NAME },
+ { LSM303D_IMU_DEV_NAME },
{}
};
MODULE_DEVICE_TABLE(spi, st_lsm9ds0_id_table);
The lsm303d is basically the lsm9ds0 without the gyroscope (which the LSM9DS0 IMU driver doesn't handle), as far as I can tell. Signed-off-by: Marius Hoch <mail@mariushoch.de> --- drivers/iio/imu/st_lsm9ds0/Kconfig | 3 ++- drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 5 +++++ drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 5 +++++ 3 files changed, 12 insertions(+), 1 deletion(-)