| Message ID | 20230417151738.19426-14-ansuelsmth@gmail.com |
|---|---|
| State | Accepted |
| Commit | 09930f1fb8750d5f4e668ab40733ab63cab58ed7 |
| Headers | show |
| Series | net: Add basic LED support for switch/phy | expand |
On 17/04/2023 17:17, Christian Marangi wrote: > Add Switch LED for each port for MikroTik RB3011UiAS-RM. > > MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips > connected. > > It was discovered that in the hardware design all 3 Switch LED trace of > the related port is connected to the same LED. This was discovered by > setting to 'always on' the related led in the switch regs and noticing > that all 3 LED for the specific port (for example for port 1) cause the > connected LED for port 1 to turn on. As an extra test we tried enabling > 2 different LED for the port resulting in the LED turned off only if > every led in the reg was off. > > Aside from this funny and strange hardware implementation, the device > itself have one green LED for each port, resulting in 10 green LED one > for each of the 10 supported port. > > Cc: Jonathan McDowell <noodles@earth.li> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++ Please do not send the DTS patches to the net-next, but to the Qualcomm SoC maintainers. The DTS must not be mixed with driver code. Best regards, Krzysztof
On Wed, Apr 19, 2023 at 02:53:45PM +0200, Krzysztof Kozlowski wrote: > On 17/04/2023 17:17, Christian Marangi wrote: > > Add Switch LED for each port for MikroTik RB3011UiAS-RM. > > > > MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips > > connected. > > > > It was discovered that in the hardware design all 3 Switch LED trace of > > the related port is connected to the same LED. This was discovered by > > setting to 'always on' the related led in the switch regs and noticing > > that all 3 LED for the specific port (for example for port 1) cause the > > connected LED for port 1 to turn on. As an extra test we tried enabling > > 2 different LED for the port resulting in the LED turned off only if > > every led in the reg was off. > > > > Aside from this funny and strange hardware implementation, the device > > itself have one green LED for each port, resulting in 10 green LED one > > for each of the 10 supported port. > > > > Cc: Jonathan McDowell <noodles@earth.li> > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > --- > > arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++ > > Please do not send the DTS patches to the net-next, but to the Qualcomm > SoC maintainers. The DTS must not be mixed with driver code. > Hi, sorry for the mess, it was asked to give an user of the LED feature for qca8k so I was a bit confused on where to include it and at the end I decided to put it in this series. What was the correct way? 2 different series and reference the DT one in the net-next? (or not targetting net-next at all?)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index 47a5d1849c72..4d509876294b 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -65,26 +65,86 @@ fixed-link { port@1 { reg = <1>; label = "sw1"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { reg = <2>; label = "sw2"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { reg = <3>; label = "sw3"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { reg = <4>; label = "sw4"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { reg = <5>; label = "sw5"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; @@ -130,26 +190,86 @@ fixed-link { port@1 { reg = <1>; label = "sw6"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { reg = <2>; label = "sw7"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { reg = <3>; label = "sw8"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { reg = <4>; label = "sw9"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { reg = <5>; label = "sw10"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; };
Add Switch LED for each port for MikroTik RB3011UiAS-RM. MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips connected. It was discovered that in the hardware design all 3 Switch LED trace of the related port is connected to the same LED. This was discovered by setting to 'always on' the related led in the switch regs and noticing that all 3 LED for the specific port (for example for port 1) cause the connected LED for port 1 to turn on. As an extra test we tried enabling 2 different LED for the port resulting in the LED turned off only if every led in the reg was off. Aside from this funny and strange hardware implementation, the device itself have one green LED for each port, resulting in 10 green LED one for each of the 10 supported port. Cc: Jonathan McDowell <noodles@earth.li> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++ 1 file changed, 120 insertions(+)