From patchwork Tue Apr 18 09:03:09 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sergio Paracuellos X-Patchwork-Id: 674707 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A8DB9C7EE22 for ; Tue, 18 Apr 2023 09:04:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231307AbjDRJDn (ORCPT ); Tue, 18 Apr 2023 05:03:43 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39484 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231228AbjDRJDh (ORCPT ); Tue, 18 Apr 2023 05:03:37 -0400 Received: from mail-wm1-x336.google.com (mail-wm1-x336.google.com [IPv6:2a00:1450:4864:20::336]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 765135595; Tue, 18 Apr 2023 02:03:24 -0700 (PDT) Received: by mail-wm1-x336.google.com with SMTP id q5so15136942wmo.4; Tue, 18 Apr 2023 02:03:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1681808602; x=1684400602; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=F5ABgnLDQ8KTbkSaDaBU5MNns2MpFyYj3L81yoSdygg=; b=i95EKG0gRBlJIHdjTZwaZB9TiLivWY4tw3KFlKrvJQr1CId6stMfqhgUccnuNtdaKQ hsXik85GvsIvrWoufABQtZvoNOMSMdjD0Hp0UrVClSQAvSfyykYicUdOdGsF8yxxMUnR fxhE04E3C7l8oSWmng9wIRrO7zJMO94RZC5mn/WlkPia2D3NAwmj+WAIFH9jWp/2rObL 8ca9/FM1qHlPWLEMHXpq1Th+dmeidUUk6QDaqIcQ9QZm1Yb9bNm323GjFkOOjU4ta+Lb rRjGtT4oP2fUVCe0qqDxp5Mtv/w1Y1Uj7gyVFAX0WpfVw54Jh/RqRl+hhnq0aiWEQ0kB Z7RQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681808602; x=1684400602; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=F5ABgnLDQ8KTbkSaDaBU5MNns2MpFyYj3L81yoSdygg=; b=a++tgFdnCDKUpytHDFfMs1ABqi8O/7EmZbcMKYjq22H9vSIOtp7jUCQERsCyVghkAJ XqZNCl48M2hqmvLk13Wm+ZCH044bVIvvpSZUT6/w3W34VfxXGdM70F+ovgmKZexhRuWe kS5qDCdTeyTbsT2XUV82N1ISemAoAV64WPa6zoLclA1IhFjr1zh5PX1MUDQSRT/gm2Ft iKNPOGIzk7VuZDGQrtpm2nB14w4B1xgMlyqtEW4T01VuG9qXFGu7fecCOX9/zqnAWXqE IV0RtAAI+bb6srzIS2CzhvmDVbIEwZuqP4cQULwtA2QxutcDYj2/ODZUDyrVZUichoWa hdPQ== X-Gm-Message-State: AAQBX9dR6igH5piYuXj2lwPpIJ17dzYWP/5j8fGxRvEHY7iaqIiQGwOG 7xMnqc6tNh1OXRM6Wf9wq1UCA6Jer8A= X-Google-Smtp-Source: AKy350ZbtZMJWyeJejrw/UExIEGQY0X27Ycx90OTR8jH7w8k9S3xLokbFGp82zp3Je/vIjn3QsIDDQ== X-Received: by 2002:a05:600c:2305:b0:3f1:728a:1881 with SMTP id 5-20020a05600c230500b003f1728a1881mr5016090wmo.31.1681808602408; Tue, 18 Apr 2023 02:03:22 -0700 (PDT) Received: from localhost.localdomain (61.red-88-10-54.dynamicip.rima-tde.net. [88.10.54.61]) by smtp.gmail.com with ESMTPSA id u7-20020a7bcb07000000b003ee70225ed2sm14341109wmj.15.2023.04.18.02.03.21 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:03:22 -0700 (PDT) From: Sergio Paracuellos To: linux-clk@vger.kernel.org Cc: linux-mips@vger.kernel.org, tsbogend@alpha.franken.de, john@phrozen.org, linux-kernel@vger.kernel.org, p.zabel@pengutronix.de, mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, matthias.bgg@gmail.com, devicetree@vger.kernel.org, arinc.unal@arinc9.com Subject: [PATCH v3 6/9] mips: ralink: mt7620: remove clock related code Date: Tue, 18 Apr 2023 11:03:09 +0200 Message-Id: <20230418090312.2818879-7-sergio.paracuellos@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230418090312.2818879-1-sergio.paracuellos@gmail.com> References: <20230418090312.2818879-1-sergio.paracuellos@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org A proper clock driver for ralink SoCs has been added. Hence there is no need to have clock related code in 'arch/mips/ralink' folder anymore. Since this is the last clock related code removal, remove also remaining prototypes in 'common.h' header file. Signed-off-by: Sergio Paracuellos --- arch/mips/include/asm/mach-ralink/mt7620.h | 35 ---- arch/mips/ralink/common.h | 3 - arch/mips/ralink/mt7620.c | 226 --------------------- 3 files changed, 264 deletions(-) diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h index 3e37705ea9cf..62f4f072c003 100644 --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -20,52 +20,17 @@ #define SYSC_REG_CHIP_REV 0x0c #define SYSC_REG_SYSTEM_CONFIG0 0x10 #define SYSC_REG_SYSTEM_CONFIG1 0x14 -#define SYSC_REG_CLKCFG0 0x2c -#define SYSC_REG_CPU_SYS_CLKCFG 0x3c -#define SYSC_REG_CPLL_CONFIG0 0x54 -#define SYSC_REG_CPLL_CONFIG1 0x58 #define MT7620_CHIP_NAME0 0x3637544d #define MT7620_CHIP_NAME1 0x20203032 #define MT7628_CHIP_NAME1 0x20203832 -#define SYSCFG0_XTAL_FREQ_SEL BIT(6) - #define CHIP_REV_PKG_MASK 0x1 #define CHIP_REV_PKG_SHIFT 16 #define CHIP_REV_VER_MASK 0xf #define CHIP_REV_VER_SHIFT 8 #define CHIP_REV_ECO_MASK 0xf -#define CLKCFG0_PERI_CLK_SEL BIT(4) - -#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT 16 -#define CPU_SYS_CLKCFG_OCP_RATIO_MASK 0xf -#define CPU_SYS_CLKCFG_OCP_RATIO_1 0 /* 1:1 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_1_5 1 /* 1:1.5 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_2 2 /* 1:2 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_2_5 3 /* 1:2.5 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_3 4 /* 1:3 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_3_5 5 /* 1:3.5 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_4 6 /* 1:4 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_5 7 /* 1:5 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_10 8 /* 1:10 */ -#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT 8 -#define CPU_SYS_CLKCFG_CPU_FDIV_MASK 0x1f -#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT 0 -#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK 0x1f - -#define CPLL_CFG0_SW_CFG BIT(31) -#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT 16 -#define CPLL_CFG0_PLL_MULT_RATIO_MASK 0x7 -#define CPLL_CFG0_LC_CURFCK BIT(15) -#define CPLL_CFG0_BYPASS_REF_CLK BIT(14) -#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT 10 -#define CPLL_CFG0_PLL_DIV_RATIO_MASK 0x3 - -#define CPLL_CFG1_CPU_AUX1 BIT(25) -#define CPLL_CFG1_CPU_AUX0 BIT(24) - #define SYSCFG0_DRAM_TYPE_MASK 0x3 #define SYSCFG0_DRAM_TYPE_SHIFT 4 #define SYSCFG0_DRAM_TYPE_SDRAM 0 diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h index 87fc16751281..fcdfc9dc6210 100644 --- a/arch/mips/ralink/common.h +++ b/arch/mips/ralink/common.h @@ -23,9 +23,6 @@ extern struct ralink_soc_info soc_info; extern void ralink_of_remap(void); -extern void ralink_clk_init(void); -extern void ralink_clk_add(const char *dev, unsigned long rate); - extern void ralink_rst_init(void); extern void __init prom_soc_init(struct ralink_soc_info *soc_info); diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index 4435f50b8d24..f44915b0b0c2 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -36,12 +36,6 @@ #define PMU1_CFG 0x8C #define DIG_SW_SEL BIT(25) -/* clock scaling */ -#define CLKCFG_FDIV_MASK 0x1f00 -#define CLKCFG_FDIV_USB_VAL 0x0300 -#define CLKCFG_FFRAC_MASK 0x001f -#define CLKCFG_FFRAC_USB_VAL 0x0003 - /* EFUSE bits */ #define EFUSE_MT7688 0x100000 @@ -53,226 +47,6 @@ static int dram_type; static struct ralink_soc_info *soc_info_ptr; -static __init u32 -mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) -{ - u64 t; - - t = ref_rate; - t *= mul; - do_div(t, div); - - return t; -} - -#define MHZ(x) ((x) * 1000 * 1000) - -static __init unsigned long -mt7620_get_xtal_rate(void) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); - if (reg & SYSCFG0_XTAL_FREQ_SEL) - return MHZ(40); - - return MHZ(20); -} - -static __init unsigned long -mt7620_get_periph_rate(unsigned long xtal_rate) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_CLKCFG0); - if (reg & CLKCFG0_PERI_CLK_SEL) - return xtal_rate; - - return MHZ(40); -} - -static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 }; - -static __init unsigned long -mt7620_get_cpu_pll_rate(unsigned long xtal_rate) -{ - u32 reg; - u32 mul; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); - if (reg & CPLL_CFG0_BYPASS_REF_CLK) - return xtal_rate; - - if ((reg & CPLL_CFG0_SW_CFG) == 0) - return MHZ(600); - - mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & - CPLL_CFG0_PLL_MULT_RATIO_MASK; - mul += 24; - if (reg & CPLL_CFG0_LC_CURFCK) - mul *= 2; - - div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & - CPLL_CFG0_PLL_DIV_RATIO_MASK; - - WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider)); - - return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]); -} - -static __init unsigned long -mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); - if (reg & CPLL_CFG1_CPU_AUX1) - return xtal_rate; - - if (reg & CPLL_CFG1_CPU_AUX0) - return MHZ(480); - - return cpu_pll_rate; -} - -static __init unsigned long -mt7620_get_cpu_rate(unsigned long pll_rate) -{ - u32 reg; - u32 mul; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; - div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & - CPU_SYS_CLKCFG_CPU_FDIV_MASK; - - return mt7620_calc_rate(pll_rate, mul, div); -} - -static const u32 mt7620_ocp_dividers[16] __initconst = { - [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, - [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, - [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, - [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, - [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, -}; - -static __init unsigned long -mt7620_get_dram_rate(unsigned long pll_rate) -{ - if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) - return pll_rate / 4; - - return pll_rate / 3; -} - -static __init unsigned long -mt7620_get_sys_rate(unsigned long cpu_rate) -{ - u32 reg; - u32 ocp_ratio; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & - CPU_SYS_CLKCFG_OCP_RATIO_MASK; - - if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers))) - return cpu_rate; - - div = mt7620_ocp_dividers[ocp_ratio]; - if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) - return cpu_rate; - - return cpu_rate / div; -} - -void __init ralink_clk_init(void) -{ - unsigned long xtal_rate; - unsigned long cpu_pll_rate; - unsigned long pll_rate; - unsigned long cpu_rate; - unsigned long sys_rate; - unsigned long dram_rate; - unsigned long periph_rate; - unsigned long pcmi2s_rate; - - xtal_rate = mt7620_get_xtal_rate(); - -#define RFMT(label) label ":%lu.%03luMHz " -#define RINT(x) ((x) / 1000000) -#define RFRAC(x) (((x) / 1000) % 1000) - - if (is_mt76x8()) { - if (xtal_rate == MHZ(40)) - cpu_rate = MHZ(580); - else - cpu_rate = MHZ(575); - dram_rate = sys_rate = cpu_rate / 3; - periph_rate = MHZ(40); - pcmi2s_rate = MHZ(480); - - ralink_clk_add("10000d00.uartlite", periph_rate); - ralink_clk_add("10000e00.uartlite", periph_rate); - } else { - cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); - pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); - - cpu_rate = mt7620_get_cpu_rate(pll_rate); - dram_rate = mt7620_get_dram_rate(pll_rate); - sys_rate = mt7620_get_sys_rate(cpu_rate); - periph_rate = mt7620_get_periph_rate(xtal_rate); - pcmi2s_rate = periph_rate; - - pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), - RINT(xtal_rate), RFRAC(xtal_rate), - RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), - RINT(pll_rate), RFRAC(pll_rate)); - - ralink_clk_add("10000500.uart", periph_rate); - } - - pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), - RINT(cpu_rate), RFRAC(cpu_rate), - RINT(dram_rate), RFRAC(dram_rate), - RINT(sys_rate), RFRAC(sys_rate), - RINT(periph_rate), RFRAC(periph_rate)); -#undef RFRAC -#undef RINT -#undef RFMT - - ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("10000100.timer", periph_rate); - ralink_clk_add("10000120.watchdog", periph_rate); - ralink_clk_add("10000900.i2c", periph_rate); - ralink_clk_add("10000a00.i2s", pcmi2s_rate); - ralink_clk_add("10000b00.spi", sys_rate); - ralink_clk_add("10000b40.spi", sys_rate); - ralink_clk_add("10000c00.uartlite", periph_rate); - ralink_clk_add("10000d00.uart1", periph_rate); - ralink_clk_add("10000e00.uart2", periph_rate); - ralink_clk_add("10180000.wmac", xtal_rate); - - if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) { - /* - * When the CPU goes into sleep mode, the BUS clock will be - * too low for USB to function properly. Adjust the busses - * fractional divider to fix this - */ - u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); - val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; - - rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); - } -} - void __init ralink_of_remap(void) { rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");