| Message ID | 20230424112523.1436926-2-angelogioacchino.delregno@collabora.com |
|---|---|
| State | Accepted |
| Commit | 729f30eac8bce6783f889cf8390ea869d03407e6 |
| Headers | show |
| Series | MT8195 Acer Tomato - devicetrees Part 3 | expand |
Hi Angelo On Tue, Apr 25, 2023 at 01:46:42PM +0200, Alexandre Mergnat wrote: > On 24/04/2023 13:25, AngeloGioacchino Del Regno wrote: > > This platform has three auxiliary NTC thermistors, connected to the > > SoC's ADC pins. Enable the auxadc in order to be able to read the > > ADC values, add a generic-adc-thermal LUT for each and finally assign > > them to the SoC's thermal zones. > > > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > > Tested-by: Chen-Yu Tsai <wenst@chromium.org> > > Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> > > --- > > .../boot/dts/mediatek/mt8195-cherry.dtsi | 105 ++++++++++++++++++ > > 1 file changed, 105 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi > > index 8ac80a136c37..4229f4f7dc2f 100644 > > --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi > > +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi > > @@ -114,6 +114,77 @@ ppvar_sys: regulator-ppvar-sys { > > regulator-boot-on; > > }; > > + /* Murata NCP03WF104F05RL */ > > + tboard_thermistor1: thermal-sensor-t1 { > > + compatible = "generic-adc-thermal"; > > + #thermal-sensor-cells = <0>; > > + io-channels = <&auxadc 0>; > > + io-channel-names = "sensor-channel"; > > + temperature-lookup-table = < (-10000) 1553 > > + (-5000) 1485 > > + 0 1406 > > + 5000 1317 > > + 10000 1219 > > + 15000 1115 > > + 20000 1007 > > + 25000 900 > > + 30000 796 > > + 35000 697 > > + 40000 605 > > + 45000 523 > > + 50000 449 > > + 55000 384 > > + 60000 327 > > + 65000 279 > > + 70000 237 > > + 75000 202 > > + 80000 172 > > + 85000 147 > > + 90000 125 > > + 95000 107 > > + 100000 92 > > + 105000 79 > > + 110000 68 > > + 115000 59 > > + 120000 51 > > + 125000 44>; > > + }; > > + > > + tboard_thermistor2: thermal-sensor-t2 { > > + compatible = "generic-adc-thermal"; > > + #thermal-sensor-cells = <0>; > > + io-channels = <&auxadc 1>; > > + io-channel-names = "sensor-channel"; > > + temperature-lookup-table = < (-10000) 1553 > > + (-5000) 1485 > > + 0 1406 > > + 5000 1317 > > + 10000 1219 > > + 15000 1115 > > + 20000 1007 > > + 25000 900 > > + 30000 796 > > + 35000 697 > > + 40000 605 > > + 45000 523 > > + 50000 449 > > + 55000 384 > > + 60000 327 > > + 65000 279 > > + 70000 237 > > + 75000 202 > > + 80000 172 > > + 85000 147 > > + 90000 125 > > + 95000 107 > > + 100000 92 > > + 105000 79 > > + 110000 68 > > + 115000 59 > > + 120000 51 > > + 125000 44>; > > + }; > > + > > usb_vbus: regulator-5v0-usb-vbus { > > compatible = "regulator-fixed"; > > regulator-name = "usb-vbus"; > > @@ -260,6 +331,10 @@ &gpu { > > mali-supply = <&mt6315_7_vbuck1>; > > }; > > +&auxadc { > > Can you put it in alphabetical order please. ? I believe this patch needs to be respun? > > + status = "okay"; > > +}; > > + > > &i2c0 { > > status = "okay"; > > @@ -1098,6 +1173,36 @@ mt6315_7_vbuck1: vbuck1 { > > }; > > }; > > +&thermal_zones { > > + soc-area-thermal { > > + polling-delay = <1000>; > > + polling-delay-passive = <250>; > > + thermal-sensors = <&tboard_thermistor1>; > > + > > + trips { > > + trip-crit { > > + temperature = <84000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + pmic-area-thermal { > > + polling-delay = <1000>; > > + polling-delay-passive = <0>; > > + thermal-sensors = <&tboard_thermistor2>; > > + > > + trips { > > + trip-crit { > > + temperature = <84000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > +}; > > + > > &u3phy0 { > > status = "okay"; > > }; > > After that: > Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> > > Regards, > Alexandre >
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 8ac80a136c37..4229f4f7dc2f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -114,6 +114,77 @@ ppvar_sys: regulator-ppvar-sys { regulator-boot-on; }; + /* Murata NCP03WF104F05RL */ + tboard_thermistor1: thermal-sensor-t1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-10000) 1553 + (-5000) 1485 + 0 1406 + 5000 1317 + 10000 1219 + 15000 1115 + 20000 1007 + 25000 900 + 30000 796 + 35000 697 + 40000 605 + 45000 523 + 50000 449 + 55000 384 + 60000 327 + 65000 279 + 70000 237 + 75000 202 + 80000 172 + 85000 147 + 90000 125 + 95000 107 + 100000 92 + 105000 79 + 110000 68 + 115000 59 + 120000 51 + 125000 44>; + }; + + tboard_thermistor2: thermal-sensor-t2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-10000) 1553 + (-5000) 1485 + 0 1406 + 5000 1317 + 10000 1219 + 15000 1115 + 20000 1007 + 25000 900 + 30000 796 + 35000 697 + 40000 605 + 45000 523 + 50000 449 + 55000 384 + 60000 327 + 65000 279 + 70000 237 + 75000 202 + 80000 172 + 85000 147 + 90000 125 + 95000 107 + 100000 92 + 105000 79 + 110000 68 + 115000 59 + 120000 51 + 125000 44>; + }; + usb_vbus: regulator-5v0-usb-vbus { compatible = "regulator-fixed"; regulator-name = "usb-vbus"; @@ -260,6 +331,10 @@ &gpu { mali-supply = <&mt6315_7_vbuck1>; }; +&auxadc { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -1098,6 +1173,36 @@ mt6315_7_vbuck1: vbuck1 { }; }; +&thermal_zones { + soc-area-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tboard_thermistor1>; + + trips { + trip-crit { + temperature = <84000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pmic-area-thermal { + polling-delay = <1000>; + polling-delay-passive = <0>; + thermal-sensors = <&tboard_thermistor2>; + + trips { + trip-crit { + temperature = <84000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; +}; + &u3phy0 { status = "okay"; };