@@ -174,6 +174,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb
new file mode 100644
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+/dts-v1/;
+
+#include "sm6115.dtsi"
+#include "pm6125.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+
+/ {
+ model = "F(x)tec Pro1X (QX1050)";
+ compatible = "fxtec,pro1x", "qcom,sm6115";
+ chassis-type = "handset";
+
+ qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@5c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
+ width = <1080>;
+ height = <2160>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&vol_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&dispcc {
+ /* HACK: disable until a panel driver is ready to retain simplefb */
+ status = "disabled";
+};
+
+&pm6125_gpios {
+ vol_up_n: vol-up-n-state {
+ pins = "gpio5";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ pm6125_s6a: s6 {
+ regulator-min-microvolt = <304000>;
+ regulator-max-microvolt = <1456000>;
+ };
+
+ pm6125_s7a: s7 {
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ pm6125_s8a: s8 {
+ regulator-min-microvolt = <1064000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l1a: l1 {
+ regulator-min-microvolt = <952000>;
+ regulator-max-microvolt = <1152000>;
+ };
+
+ pm6125_l4a: l4 {
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm6125_l5a: l5 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3056000>;
+ };
+
+ pm6125_l6a: l6 {
+ regulator-min-microvolt = <576000>;
+ regulator-max-microvolt = <656000>;
+ };
+
+ pm6125_l7a: l7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l8a: l8 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <728000>;
+ };
+
+ pm6125_l9a: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pm6125_l10a: l10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ pm6125_l11a: l11 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1952000>;
+ regulator-allow-set-load;
+ };
+
+ pm6125_l12a: l12 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <1984000>;
+ };
+
+ pm6125_l13a: l13 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ pm6125_l14a: l14 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ pm6125_l15a: l15 {
+ regulator-min-microvolt = <2920000>;
+ regulator-max-microvolt = <3232000>;
+ };
+
+ pm6125_l16a: l16 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ pm6125_l17a: l17 {
+ regulator-min-microvolt = <1152000>;
+ regulator-max-microvolt = <1384000>;
+ };
+
+ pm6125_l18a: l18 {
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1312000>;
+ };
+
+ pm6125_l19a: l19 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ pm6125_l20a: l20 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ pm6125_l21a: l21 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ pm6125_l22a: l22 {
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ pm6125_l23a: l23 {
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ pm6125_l24a: l24 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&sleep_clk {
+ clock-frequency = <32764>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <14 4>;
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&pm6125_l24a>;
+ vcc-max-microamp = <600000>;
+ vccq2-supply = <&pm6125_l11a>;
+ vccq2-max-microamp = <600000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&pm6125_l4a>;
+ vdda-pll-supply = <&pm6125_l12a>;
+ vddp-ref-clk-supply = <&pm6125_l18a>;
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ maximum-speed = "high-speed";
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ vdd-supply = <&pm6125_l4a>;
+ vdda-pll-supply = <&pm6125_l12a>;
+ vdda-phy-dpdm-supply = <&pm6125_l15a>;
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <19200000>;
+};
The F(x)tec Pro1X is a mobile phone released by FX Technologies Ltd in 2022. The phone is exactly the same as the Pro1 released in 2019 with some changes: - MSM8998 -> SM6115 - Camera button is no longer multistate - Only one 48MP back camera - A new keyboard layout picked by the community. This commit has the following features working: - Display (using simplefb) - UFS - Power and volume buttons - Pinctrl - RPM Regulators - USB (Device Mode) To get a successful boot run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/\ sm6115-fxtec-pro1x.dtb > .Image.gz-dtb mkbootimg --kernel .Image.gz-dtb \ --ramdisk initrd.img \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --second_offset 0xf00000 \ --tags_offset 0x100 \ --pagesize 4096 \ --cmdline "CMDLINE HERE" \ -o qx1050-boot.img fastboot flash boot qx1050-boot.img fastboot erase dtbo fastboot reboot Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 250 ++++++++++++++++++++++++ 2 files changed, 251 insertions(+)