diff mbox series

[v2,10/10] ARM: dts: qcom-mdm9615: specify gcc clocks

Message ID 20230512003230.3043284-11-dmitry.baryshkov@linaro.org
State Accepted
Commit d988aa8cd09653d9607788e9d1c98f0d7a55e731
Headers show
Series [v2,01/10] dt-bindings: clock: qcom,lcc.yaml: describe clocks for lcc,qcom-mdm9615 | expand

Commit Message

Dmitry Baryshkov May 12, 2023, 12:32 a.m. UTC 
Fully specify the clocks used by the GCC on the mdm9615 platform.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-mdm9615.dtsi | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 556abe90cf5b..fc4f52f9e9f7 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -10,6 +10,7 @@ 
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-mdm9615.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
@@ -106,6 +107,8 @@  gcc: clock-controller@900000 {
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&lcc PLL4>;
 		};
 
 		lcc: clock-controller@28000000 {