diff mbox series

[v7,8/9] ARM: nspire: Use syscon-reboot to handle restart

Message ID 20230515191326.608638-9-afd@ti.com
State Accepted
Commit 47c128c65ff71c2d59354acb9b189b110a31e802
Headers show
Series TI-Nspire cleanups | expand

Commit Message

Andrew Davis May 15, 2023, 7:13 p.m. UTC
Writing this bit can be handled by the DT syscon-reboot driver.
Enable that driver and remove the machine_desc version.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
---
 arch/arm/mach-nspire/Kconfig  |  2 ++
 arch/arm/mach-nspire/mmio.h   |  3 ---
 arch/arm/mach-nspire/nspire.c | 10 ----------
 3 files changed, 2 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index b7a3871876d7..0ffdcaca1e6b 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -9,5 +9,7 @@  config ARCH_NSPIRE
 	select ARM_VIC
 	select ARM_TIMER_SP804
 	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
 	help
 	  This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/mmio.h b/arch/arm/mach-nspire/mmio.h
index 48e32f13f311..2ce0656139ec 100644
--- a/arch/arm/mach-nspire/mmio.h
+++ b/arch/arm/mach-nspire/mmio.h
@@ -5,9 +5,6 @@ 
  *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
  */
 
-#define NSPIRE_MISC_PHYS_BASE		0x900A0000
-#define NSPIRE_MISC_HWRESET		0x08
-
 #define NSPIRE_PWR_PHYS_BASE		0x900B0000
 #define NSPIRE_PWR_VIRT_BASE		0xFEEB0000
 #define NSPIRE_PWR_BUS_DISABLE1		0x18
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 2d4abb0288b9..1e13337972dd 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -27,16 +27,6 @@  static const char *const nspire_dt_match[] __initconst = {
 	NULL,
 };
 
-static void nspire_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
-	if (!base)
-		return;
-
-	writel(2, base + NSPIRE_MISC_HWRESET);
-}
-
 DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
 	.dt_compat	= nspire_dt_match,
-	.restart	= nspire_restart,
 MACHINE_END