@@ -18,6 +18,7 @@
#include <dt-bindings/interconnect/qcom,sc7280.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -849,7 +850,7 @@ gcc: clock-controller@100000 {
<&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
<0>, <&pcie1_lane>,
<0>, <0>, <0>,
- <&usb_1_ssphy>;
+ <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
"pcie_0_pipe_clk", "pcie_1_pipe_clk",
"ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
@@ -3326,49 +3327,26 @@ usb_2_hsphy: phy@88e4000 {
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
- usb_1_qmpphy: phy-wrapper@88e9000 {
- compatible = "qcom,sc7280-qmp-usb3-dp-phy",
- "qcom,sm8250-qmp-usb3-dp-phy";
- reg = <0 0x088e9000 0 0x200>,
- <0 0x088e8000 0 0x40>,
- <0 0x088ea000 0 0x200>;
+ usb_1_qmpphy: phy@88e8000 {
+ compatible = "qcom,sc7280-qmp-usb3-dp-phy";
+ reg = <0 0x088e8000 0 0x3000>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "com_aux";
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: usb3-phy@88e9200 {
- reg = <0 0x088e9200 0 0x200>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x400>,
- <0 0x088e9600 0 0x200>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x100>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
-
- dp_phy: dp-phy@88ea200 {
- reg = <0 0x088ea200 0 0x200>,
- <0 0x088ea400 0 0x200>,
- <0 0x088eaa00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #phy-cells = <0>;
- #clock-cells = <1>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <1>;
};
usb_2: usb@8cf8800 {
@@ -3693,7 +3671,7 @@ usb_1_dwc3: usb@a600000 {
iommus = <&apps_smmu 0xe0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
maximum-speed = "super-speed";
};
@@ -3798,8 +3776,8 @@ dispcc: clock-controller@af00000 {
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&mdss_dsi_phy 0>,
<&mdss_dsi_phy 1>,
- <&dp_phy 0>,
- <&dp_phy 1>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&mdss_edp_phy 0>,
<&mdss_edp_phy 1>;
clock-names = "bi_tcxo",
@@ -4137,8 +4115,9 @@ mdss_dp: displayport-controller@ae90000 {
"stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
- assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
- phys = <&dp_phy>;
+ assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+ phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
operating-points-v2 = <&dp_opp_table>;
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 59 +++++++++------------------- 1 file changed, 19 insertions(+), 40 deletions(-)