| Message ID | 20230601093744.1565802-4-u-kumar1@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: ti: k3-j7200: Add properties and sync with uboot | expand |
Thanks On 6/1/2023 4:15 PM, Nishanth Menon wrote: > On 15:07-20230601, Udit Kumar wrote: >> Add main_uart0 pin mux in board common file > $subject is a bit misleading.. I think the intent is to mux the console > explicitly rather than a pinmux cleanup itself. oops, missed to changed subject of this patch after split. Will address in v3. >> Signed-off-by: Udit Kumar<u-kumar1@ti.com> >> --- >> arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts >> index 0cc0e1dc40c5..02d2e4b36b18 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts >> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts >> @@ -113,6 +113,15 @@ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ >> >; >> }; >> >> + main_uart0_pins_default: main_uart0_pins_default { >> + pinctrl-single,pins = < >> + J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */ >> + J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ >> + J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */ >> + J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */ >> + >; >> + }; >> + >> main_i2c1_pins_default: main-i2c1-pins-default { >> pinctrl-single,pins = < >> J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ >> @@ -162,6 +171,8 @@ &main_uart0 { >> status = "okay"; >> /* Shared with ATF on this platform */ >> power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&main_uart0_pins_default>; >> }; >> >> &main_uart1 { >> -- >> 2.34.1 >>
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 0cc0e1dc40c5..02d2e4b36b18 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -113,6 +113,15 @@ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ >; }; + main_uart0_pins_default: main_uart0_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */ + J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ + J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */ + J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */ + >; + }; + main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ @@ -162,6 +171,8 @@ &main_uart0 { status = "okay"; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; }; &main_uart1 {
Add main_uart0 pin mux in board common file Signed-off-by: Udit Kumar <u-kumar1@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)