@@ -262,10 +262,11 @@ &usb3_hs_phy {
&usb3 {
status = "okay";
- dwc3@8a00000 {
- phys = <&usb3_hs_phy>;
- phy-names = "usb2-phy";
};
+
+&usb3_dwc {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
};
&usb2_hs_phy {
@@ -621,7 +621,7 @@ ethphy4: ethernet-phy@4 {
};
};
- usb3_ss_phy: ssphy@9a000 {
+ usb3_ss_phy: usb-phy@9a000 {
compatible = "qcom,usb-ss-ipq4019-phy";
#phy-cells = <0>;
reg = <0x9a000 0x800>;
@@ -631,7 +631,7 @@ usb3_ss_phy: ssphy@9a000 {
status = "disabled";
};
- usb3_hs_phy: hsphy@a6000 {
+ usb3_hs_phy: usb-phy@a6000 {
compatible = "qcom,usb-hs-ipq4019-phy";
#phy-cells = <0>;
reg = <0xa6000 0x40>;
@@ -641,7 +641,7 @@ usb3_hs_phy: hsphy@a6000 {
status = "disabled";
};
- usb3: usb3@8af8800 {
+ usb3: usb@8af8800 {
compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
reg = <0x8af8800 0x100>;
#address-cells = <1>;
@@ -653,7 +653,7 @@ usb3: usb3@8af8800 {
ranges;
status = "disabled";
- dwc3@8a00000 {
+ usb3_dwc: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xf8000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
@@ -663,7 +663,7 @@ dwc3@8a00000 {
};
};
- usb2_hs_phy: hsphy@a8000 {
+ usb2_hs_phy: usb-phy@a8000 {
compatible = "qcom,usb-hs-ipq4019-phy";
#phy-cells = <0>;
reg = <0xa8000 0x40>;
@@ -673,7 +673,7 @@ usb2_hs_phy: hsphy@a8000 {
status = "disabled";
};
- usb2: usb2@60f8800 {
+ usb2: usb@60f8800 {
compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
reg = <0x60f8800 0x100>;
#address-cells = <1>;
@@ -685,7 +685,7 @@ usb2: usb2@60f8800 {
ranges;
status = "disabled";
- dwc3@6000000 {
+ usb@6000000 {
compatible = "snps,dwc3";
reg = <0x6000000 0xf8000>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
Device node names should be generic which is also expected by USB bindings: qcom-ipq4018-jalapeno.dtb: dwc3@6000000: $nodename:0: 'dwc3@6000000' does not match '^usb(@.*)?' Override also the DWC3 node in qcom-ipq4018-ap120c-ac.dtsi by label/phandle, not via node path, because it is less error-prone and makes the overriding node-name independent. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 7 ++++--- arch/arm/boot/dts/qcom-ipq4019.dtsi | 14 +++++++------- 2 files changed, 11 insertions(+), 10 deletions(-)