diff mbox series

[v4,13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition

Message ID 20230725023416.11205-14-quic_wcheng@quicinc.com
State Superseded
Headers show
Series None | expand

Commit Message

Wesley Cheng July 25, 2023, 2:33 a.m. UTC
Add a new definition for specifying how many XHCI secondary interrupters
can be allocated.  XHCI in general can potentially support up to 1024
interrupters, which some uses may want to limit depending on how many
users utilize the interrupters.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Krzysztof Kozlowski Aug. 29, 2023, 6:31 a.m. UTC | #1
On 25/07/2023 04:33, Wesley Cheng wrote:
> Add a new definition for specifying how many XHCI secondary interrupters
> can be allocated.  XHCI in general can potentially support up to 1024
> interrupters, which some uses may want to limit depending on how many
> users utilize the interrupters.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> ---
>  .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> index 50edc4da780e..cc6012e922e0 100644
> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> @@ -376,6 +376,19 @@ properties:
>      items:
>        enum: [1, 4, 8, 16, 32, 64, 128, 256]
>  
> +  snps,num-hc-interrupters:
> +    description:
> +      Defines the maximum number of XHCI host controller interrupters that can
> +      be supported.  The XHCI host controller has support to allocate multiple
> +      event rings, which can be assigned to different clients/users.  The DWC3
> +      controller has a maximum of 8 interrupters.  If this is not defined then
> +      the value will be defaulted to 1.  This parameter is used only when
> +      operating in host mode.
> +    $ref: /schemas/types.yaml#/definitions/uint8

You did not respond to Rob's comments before sending this patch. :(

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 50edc4da780e..cc6012e922e0 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -376,6 +376,19 @@  properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  snps,num-hc-interrupters:
+    description:
+      Defines the maximum number of XHCI host controller interrupters that can
+      be supported.  The XHCI host controller has support to allocate multiple
+      event rings, which can be assigned to different clients/users.  The DWC3
+      controller has a maximum of 8 interrupters.  If this is not defined then
+      the value will be defaulted to 1.  This parameter is used only when
+      operating in host mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 8
+    default: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: