From patchwork Fri Aug 4 13:32:37 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Duje_Mihanovi=C4=87?= X-Patchwork-Id: 710708 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 09532C04FE1 for ; Fri, 4 Aug 2023 13:35:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231329AbjHDNfO (ORCPT ); Fri, 4 Aug 2023 09:35:14 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48022 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231137AbjHDNe4 (ORCPT ); Fri, 4 Aug 2023 09:34:56 -0400 Received: from mx.skole.hr (mx1.hosting.skole.hr [161.53.165.185]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F15D41BF9; Fri, 4 Aug 2023 06:34:48 -0700 (PDT) Received: from mx1.hosting.skole.hr (localhost.localdomain [127.0.0.1]) by mx.skole.hr (mx.skole.hr) with ESMTP id 6E9DE83BBD; Fri, 4 Aug 2023 15:34:47 +0200 (CEST) From: =?utf-8?q?Duje_Mihanovi=C4=87?= Date: Fri, 04 Aug 2023 15:32:37 +0200 Subject: [PATCH v3 7/8] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte MIME-Version: 1.0 Message-Id: <20230804-pxa1908-lkml-v3-7-8e48fca37099@skole.hr> References: <20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr> In-Reply-To: <20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr> To: Robert Jarzmik , Linus Walleij , Bartosz Golaszewski , Andy Shevchenko , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lubomir Rintel , Catalin Marinas , Will Deacon , Kees Cook , Tony Luck , "Guilherme G. Piccoli" , =?utf-8?q?Duje_Mihanovi=C4=87?= Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-hardening@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, afaerber@suse.de X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=16489; i=duje.mihanovic@skole.hr; h=from:subject:message-id; bh=oUufXt0MP5S0TNaPjNqmOb2jja41pWx66XehgjkskYk=; b=owEBbQKS/ZANAwAIAZoRnrBCLZbhAcsmYgBkzP48qfzhsULMm2kQizPNcEO/eLvN+QM2jfE0U mER6fowX0iJAjMEAAEIAB0WIQRT351NnD/hEPs2LXiaEZ6wQi2W4QUCZMz+PAAKCRCaEZ6wQi2W 4RvED/4r/cOCutLHri3V/jL2kJk63qTV3Wwwbh1RKi4LgM7CFrmqtJlkP6X4asyUvnf/pCiGKyZ VejT043ewPFlrZH57pi3aNFHwIWvyGJVjECGXX+BqTu8c9dByM6aLmXJzeXbJmQDO0BCGBDeBPF HHNt0mBeaUMGbE7s/AbBk4omcCF9+DyeSRFkm281D+wKPQrR9xchosqk7uSvrNPyCsUcjvPQJHn PyTvlNfMVmhpTWOJDkjOz7ykKEvzaUKjDspQNhWevo153UznvfAOTeNN6jPu9Op3wntsA68wDMD kp3OE0t0sR2TrPalsZ6u6ch1rbfv5zmmWV0r97VJkrTRgjVmMXxWe67ENVyy4Evx4/jgxT3MAks SLTiAT33syiAUpo0nGbHOR7YLtPMd2Bb5c+0K6YaiRZoi3GkZoW4/TdzVSFyeIA2Lq15S07uATA PvVYIm5SNU++oqrnFWH3sr2rgHt1x1ODMIwehPdmnDtPsU6tlrpr4GahHJmcIw0sOMZhxTfNsDO 7mEGoArSyqHZVPRdd+PWUC7QDUQXlGiB6SVJwbdeYAlLkVuCQnfVEcRTmdNowwzkJZJ1qmyBC2f IeKC3RuiMH2ecz5XOnJpj0h5qb8XM7bhXrVHJtLO7MVCkZXQs3xxbc6/Hpr+7vgj5+tBykVzRDv vmaXfleYqr6DG1A== X-Developer-Key: i=duje.mihanovic@skole.hr; a=openpgp; fpr=53DF9D4D9C3FE110FB362D789A119EB0422D96E1 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value Edition LTE, a smartphone based on said SoC. Signed-off-by: Duje Mihanović --- arch/arm64/boot/dts/marvell/Makefile | 3 + .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 332 +++++++++++++++++++++ arch/arm64/boot/dts/marvell/pxa1908.dtsi | 292 ++++++++++++++++++ 3 files changed, 627 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 79ac09b58a89..263be6ec7567 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -27,3 +27,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb + +# MMP SoC Family +dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts new file mode 100644 index 000000000000..59e5d6f15dd2 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "pxa1908.dtsi" +#include +#include + +/ { + model = "Samsung Galaxy Core Prime VE LTE"; + compatible = "samsung,coreprimevelte", "marvell,pxa1908"; + + aliases { + mmc0 = &sdh2; /* eMMC */ + mmc1 = &sdh0; /* SD card */ + serial0 = &uart0; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + fb0: framebuffer@17177000 { + compatible = "simple-framebuffer"; + reg = <0 0x17177000 0 (480 * 800 * 4)>; + width = <480>; + height = <800>; + stride = <(480 * 4)>; + format = "a8r8g8b8"; + }; + }; + + /* Bootloader fills this in */ + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@17000000 { + reg = <0 0x17000000 0 0x1800000>; + no-map; + }; + + gpu@9000000 { + reg = <0 0x9000000 0 0x1000000>; + }; + + /* Communications processor, aka modem */ + cp@3000000 { + reg = <0 0x3000000 0 0x5000000>; + }; + + cm3@a000000 { + reg = <0 0xa000000 0 0x80000>; + }; + + seclog@8000000 { + reg = <0 0x8000000 0 0x100000>; + }; + + ramoops@8100000 { + compatible = "ramoops"; + reg = <0 0x8100000 0 0x40000>; + record-size = <0x8000>; + console-size = <0x20000>; + max-reason = <5>; + }; + }; + + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <3>; + i2c-gpio,timeout-ms = <100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_muic_pins>; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + autorepeat; + + key-home { + label = "Home"; + linux,code = ; + gpios = <&gpio 50 GPIO_ACTIVE_LOW>; + }; + + key-volup { + label = "Volume Up"; + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + key-voldown { + label = "Volume Down"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&smmu { + status = "okay"; +}; + +&pmx { + pinctrl-single,gpio-range = <&range 55 55 0>, + <&range 110 32 0>, + <&range 52 1 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&board_pins_1 &board_pins_2 &board_pins_3>; + + board_pins_1: pinmux-board-1 { + pinctrl-single,pins = < + 0x160 0 + 0x164 0 + 0x168 0 + 0x16c 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + board_pins_2: pinmux-board-2 { + pinctrl-single,pins = < + 0x44 1 + 0x48 1 + 0x20 1 + 0x18 1 + 0x14 1 + 0x10 1 + 0xc 1 + 0x8 1 + 0x68 1 + 0x58 0 + 0x54 0 + 0x7c 0 + 0x6c 0 + 0x70 0 + 0x4c 1 + 0x50 1 + 0xac 0 + 0x90 0 + 0x8c 0 + 0x88 0 + 0x84 0 + 0xc8 0 + 0x128 0 + 0x190 0 + 0x194 0 + 0x1a0 0 + 0x114 0 + 0x118 0 + 0x1d8 0 + 0x1e4 0 + 0xe8 0 + 0x100 0 + 0x204 0 + 0x210 0 + 0x218 0 + >; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + board_pins_3: pinmux-board-3 { + pinctrl-single,pins = < + 0x260 0 + 0x264 0 + 0x268 0 + 0x26c 0 + 0x270 0 + 0x274 0 + 0x78 0 + 0x74 0 + 0xb0 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + uart0_pins: pinmux-uart0 { + pinctrl-single,pins = < + 0x198 6 + 0x19c 6 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + gpio_keys_pins: pinmux-gpio-keys { + pinctrl-single,pins = < + 0x11c 0 + 0x120 0 + 0x1a4 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + i2c_muic_pins: pinmux-i2c-muic { + pinctrl-single,pins = < + 0x154 0 + 0x150 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + sdh0_pins_1: pinmux-sdh0-1 { + pinctrl-single,pins = < + 0x108 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh0_pins_2: pinmux-sdh0-2 { + pinctrl-single,pins = < + 0x94 0 + 0x98 0 + 0x9c 0 + 0xa0 0 + 0xa4 0 + >; + pinctrl-single,drive-strength = <0x800 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh0_pins_3: pinmux-sdh0-3 { + pinctrl-single,pins = < + 0xa8 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&twsi0 { + status = "okay"; +}; + +&twsi1 { + status = "okay"; +}; + +&twsi2 { + status = "okay"; +}; + +&twsi3 { + status = "okay"; +}; + +&usb { + extcon = <&muic>, <&muic>; +}; + +&sdh2 { + /* Disabled for now because initialization fails with -ETIMEDOUT. */ + status = "disabled"; + bus-width = <8>; + non-removable; + broken-cd; + mmc-ddr-1_8v; +}; + +&sdh0 { + pinctrl-0 = <&sdh0_pins_1 &sdh0_pins_2 &sdh0_pins_3>; + cd-gpios = <&gpio 11 0>; + cd-inverted; + bus-width = <4>; + wp-inverted; +}; diff --git a/arch/arm64/boot/dts/marvell/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/pxa1908.dtsi new file mode 100644 index 000000000000..59b3e609bb24 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/pxa1908.dtsi @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include +#include + +/ { + model = "Marvell Armada PXA1908"; + compatible = "marvell,pxa1908"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 0>; + enable-method = "psci"; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 1>; + enable-method = "psci"; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 2>; + enable-method = "psci"; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smmu: iommu@c0010000 { + compatible = "arm,mmu-400"; + reg = <0 0xc0010000 0 0x10000>; + #global-interrupts = <1>; + #iommu-cells = <1>; + interrupts = , + ; + status = "disabled"; + }; + + gic: interrupt-controller@d1df9000 { + compatible = "arm,gic-400"; + reg = <0 0xd1df9000 0 0x1000>, + <0 0xd1dfa000 0 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apb@d4000000 { + compatible = "simple-bus"; + reg = <0 0xd4000000 0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xd4000000 0x200000>; + + pdma: dma-controller@0 { + compatible = "marvell,pdma-1.0"; + reg = <0 0x10000>; + interrupts = ; + dma-channels = <30>; + #dma-cells = <2>; + }; + + twsi1: i2c@10800 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10800 0x64>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_TWSI1>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi0: i2c@11000 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11000 0x64>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_TWSI0>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi3: i2c@13800 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x13800 0x64>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_TWSI3>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + apbc: clock-controller@15000 { + compatible = "marvell,pxa1908-apbc"; + reg = <0x15000 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@17000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; + reg = <0x17000 0x1000>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_UART0>; + reg-shift = <2>; + }; + + uart1: serial@18000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; + reg = <0x18000 0x1000>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_UART1>; + reg-shift = <2>; + }; + + gpio: gpio@19000 { + compatible = "marvell,mmp-gpio"; + reg = <0x19000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&apbc PXA1908_CLK_GPIO>; + interrupts = ; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <2>; + ranges = <0 0x19000 0x800>; + + gpio@0 { + reg = <0x0 0x4>; + }; + + gpio@4 { + reg = <0x4 0x4>; + }; + + gpio@8 { + reg = <0x8 0x4>; + }; + + gpio@100 { + reg = <0x100 0x4>; + }; + }; + + pmx: pinmux@1e000 { + compatible = "pinconf-single"; + reg = <0x1e000 0x330>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + ranges; + + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + uart2: serial@36000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; + reg = <0x36000 0x1000>; + interrupts = ; + clocks = <&apbcp PXA1908_CLK_UART2>; + reg-shift = <2>; + }; + + twsi2: i2c@37000 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x37000 0x64>; + interrupts = ; + clocks = <&apbcp PXA1908_CLK_TWSI2>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + apbcp: clock-controller@3b000 { + compatible = "marvell,pxa1908-apbcp"; + reg = <0x3b000 0x1000>; + #clock-cells = <1>; + }; + + mpmu: clock-controller@50000 { + compatible = "marvell,pxa1908-mpmu"; + reg = <0x50000 0x1000>; + #clock-cells = <1>; + }; + }; + + axi@d4200000 { + compatible = "simple-bus"; + reg = <0 0xd4200000 0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xd4200000 0x200000>; + + usbphy: phy@7000 { + compatible = "marvell,pxa1928-usb-phy"; + reg = <0x7000 0x200>; + clocks = <&apmu PXA1908_CLK_USB>; + #phy-cells = <0>; + }; + + usb: usb@8000 { + compatible = "chipidea,usb2"; + reg = <0x8000 0x200>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_USB>; + phys = <&usbphy>; + phy-names = "usb-phy"; + }; + + sdh0: mmc@80000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x80000 0x120>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_SDH0>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + sdh1: mmc@80800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x80800 0x120>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_SDH1>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + sdh2: mmc@81000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x81000 0x120>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_SDH2>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + apmu: clock-controller@82800 { + compatible = "marvell,pxa1908-apmu"; + reg = <0x82800 0x400>; + #clock-cells = <1>; + }; + }; + }; +};