From patchwork Tue Aug 29 17:16:47 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alex Bee X-Patchwork-Id: 718775 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6579DC83F23 for ; Tue, 29 Aug 2023 17:19:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238088AbjH2RTG (ORCPT ); Tue, 29 Aug 2023 13:19:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40188 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237711AbjH2RSf (ORCPT ); Tue, 29 Aug 2023 13:18:35 -0400 Received: from mail-ej1-x634.google.com (mail-ej1-x634.google.com [IPv6:2a00:1450:4864:20::634]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 135F1CF3; Tue, 29 Aug 2023 10:18:14 -0700 (PDT) Received: by mail-ej1-x634.google.com with SMTP id a640c23a62f3a-977e0fbd742so599069966b.2; Tue, 29 Aug 2023 10:18:13 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1693329476; x=1693934276; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=9dgLUHwMy8Op6Q955RlBIJYZNEpbxIwHtFF9Axp5TBc=; b=rVocglGgRvpy+hgqv358C8NtQBIl+vNJ9cAF/wVlRixvPboXyjdw4vtXaI1sOyXcek Jsyq/4NNhXpliV2UmTHOR95bZzPPaOdsrz6beMnEaO7NC9pmJygJfdEgXIblbEUDYoVQ w1Aow4ihAO0S263Z3BxXFi+Za75AfB9GWduekvLTlLfAn0JCEnBRf2oTZ/tFPSFC4BPJ o21DKAiEh0uKjHHd/H2tX2hu2QACHNMsooBUvbIJ9N9kS2ZPR6gnm2VGSrcbT/OCeRwy cByHzv+q/ysAd8dyiNLiQppVdsrjyT4XsRpp7eia1Nb7Tq1mTfAKidgwcooLEulq4Z9Z YBVw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1693329476; x=1693934276; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=9dgLUHwMy8Op6Q955RlBIJYZNEpbxIwHtFF9Axp5TBc=; b=AwkfyfGV8+ZgFatkjy51V3PNUvzFy5dfocEdBM/SU0FxIGLg4koXQstKpPQYYuhDcS Z42EnAGwfktH7q48cjexXrYzZFCyIDZcg97J1irLYnF+0LdaP11tV1WmguDFob7GrqPV mUh8L0KpHxQeIZcikq+RkGmEs0yD+izCRNG9bZluhg8GpxJoHvhwuTjXROQSKtxsw8hv kKtoWdJG+LCUeHiJn/s7AVBLixy/BXtJ8dBrkHIfbMpkKlTxzuHKAD5CKnY4/lbLMRcb Ubpf433/7+DCnn6vfovPADIQkHHjtAdGtDmHwQSZam5thirNucw4uWNsfbmmfMz4zU7Y PLgw== X-Gm-Message-State: AOJu0YxK4VIM44VV1yXrXUTBu9veWnoB3y/jbJRxn52s75+AGv/JyStY oyee17al3R+J6Bh4gqRxxg== X-Google-Smtp-Source: AGHT+IEAHEpea0my2awNoKKTjwFIoo2aOA5dRzNaAYj8ArUp4igUchYtsYpX/tLmQOBb/TDR6xtBKA== X-Received: by 2002:a17:906:5a45:b0:9a1:cdf1:ba6 with SMTP id my5-20020a1709065a4500b009a1cdf10ba6mr14633357ejc.12.1693329475384; Tue, 29 Aug 2023 10:17:55 -0700 (PDT) Received: from U4.lan ([2001:9e8:b958:3410:8e0c:ed68:cd6c:7cb8]) by smtp.gmail.com with ESMTPSA id a21-20020a1709062b1500b00993cc1242d4sm6115834ejg.151.2023.08.29.10.17.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 29 Aug 2023 10:17:55 -0700 (PDT) From: Alex Bee To: Heiko Stuebner , Rob Herring , Krzysztof Kozlowski , Conor Dooley , David Airlie , Daniel Vetter , Lee Jones , Liam Girdwood , Mark Brown , Michael Turquette , Stephen Boyd , Vinod Koul , Kishon Vijay Abraham I Cc: Elaine Zhang , Johan Jonker , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, alsa-devel@alsa-project.org, linux-clk@vger.kernel.org, linux-phy@lists.infradead.org, Alex Bee Subject: [PATCH 31/31] ARM: dts: Add Geniatech XPI-3128 RK3128 board Date: Tue, 29 Aug 2023 19:16:47 +0200 Message-ID: <20230829171647.187787-32-knaerzche@gmail.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20230829171647.187787-1-knaerzche@gmail.com> References: <20230829171647.187787-1-knaerzche@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org XPI-3128 is RK3128 based SBC form Geniatec in RPi form factor Specs: - Rockchip RK3128 - 1 GB DDR3 DRAM - 8/16 GB eMMC - TF card slot - 100 MBit ethernet / RJ45 - optional Marvell 88W8897 (USB version) - 3 x USB host (onboard GL852G hub connected to SoC ehci host) - 1 x USB otg - 1 x Type-C (solely for powering the board) - HDMI 1.4 out - 1 ADC button - IR receiver - Artasie AM1805 RTC - 40 pin header Signed-off-by: Alex Bee --- arch/arm/boot/dts/rockchip/Makefile | 1 + .../arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 431 ++++++++++++++++++ 2 files changed, 432 insertions(+) create mode 100644 arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index 0f46e18fe275..58868cf0510b 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ rk3128-evb.dtb \ + rk3128-xpi-3128.dtb \ rk3188-bqedison2qc.dtb \ rk3188-px3-evb.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts new file mode 100644 index 000000000000..842b5f20d98a --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include "rk3128.dtsi" + +/ { + model = "Geniatech XPI-3128"; + compatible = "geniatech,xpi-3128", "rockchip,rk3128"; + + aliases { + ethernet0 = &gmac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + mmc0 = &emmc; + mmc1 = &sdmmc; + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <3300000>; + + button-recovery { + label = "Recovery"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + + dc_5v: dc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* + * This is a vbus-supply, which also supplies the GL852G usb hub, + * thus has to be always-on + */ + host_pwr_5v: host-pwr-5v-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1500>; + regulator-name = "HOST_PWR_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&host_drv>; + enable-active-high; + regulator-always-on; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = ; + default-state = "on"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + }; + + led-spd { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_LAN; + color = ; + /* + * currently not allowed to be set as per + * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml + * and has to set in userspace + * + * linux,default-trigger = "netdev"; + */ + pinctrl-names = "default"; + pinctrl-0 = <&spd_led>; + }; + }; + + mcu3v3: mcu3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "MCU3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_ddr: vcc-ddr-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_io: vcc-io-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_LAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: vcc-sd-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + startup-delay-us = <500>; + regulator-name = "VCC_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwren>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + regulator-always-on; + regulator-boot-on; + }; + + vcc33_hdmi: vcc33-hdmi-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC33_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcca_33>; + regulator-always-on; + regulator-boot-on; + }; + + vcca_33: vcca-33-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_11: vdd-11-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vdd11_hdmi: vdd11-hdmi-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD11_HDMI"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vdd_11>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_arm: vdd-arm-regulator { + compatible = "pwm-regulator"; + regulator-name = "VDD_ARM"; + pwms = <&pwm1 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + /* + * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV. + * Since there are HW blocks in PD_LOGIC which are all driven by + * this supply, which either do not have a driver at all or the + * driver does not have regulator support, but are required for + * the board to run we have to make sure here, that the voltage + * never drops below 1050 mV. + */ + vdd_log: vdd-log-regulator { + compatible = "pwm-regulator"; + regulator-name = "VDD_LOG"; + pwms = <&pwm2 0 25000 1>; + pwm-dutycycle-range = <30 100>; + pwm-supply = <&vcc_sys>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <4000>; + regulator-always-on; + regulator-boot-on; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + vmmc-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + cap-mmc-highspeed; + no-sd; + no-sdio; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_lan>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + assigned-clocks = <&cru SCLK_MAC_SRC>; + assigned-clock-rates= <50000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + status = "okay"; +}; + +/* + * Add labels for each pin which is exposed at the 40-pin header + */ +&gpio0 { + gpio-line-names = /* GPIO0 A0-A7 */ + "", "", "HEADER_5", "HEADER_3", + "", "", "", "", + /* GPIO0 B0-B7 */ + "HEADER_22", "HEADER_23", "", "HEADER_19", + "HEADER_26", "HEADER_21", "HEADER_24", "", + /* GPIO0 C0-C7 */ + "", "HEADER_18", "", "", + "", "", "", "", + /* GPIO0 D0-D7 */ + "HEADER_36", "", "", "", + "", "", "HEADER_13", ""; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A0-A7 */ + "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37", + "HEADER_40", "HEADER_38", "", "", + /* GPIO1 B0-B7 */ + "HEADER_11", "", "", "HEADER_29", + "HEADER_31", "", "", "", + /* GPIO1 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO1 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 C0-C7 */ + "", "", "", "", + "HEADER_27", "", "", "", + /* GPIO2 D0-D7 */ + "", "", "HEADER_8", "HEADER_10", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO3 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO3 C0-C7 */ + "", "HEADER_32", "", "", + "", "", "", "HEADER_12", + /* GPIO3 D0-D7 */ + "", "", "", "HEADER_15", + "", "", "", ""; +}; + +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + +&mdio { + phy0: ethernet-phy@1 { + /* DP83848C interrupt is not connected */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + max-speed = <100>; + reset-assert-us = <15000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dp83848c_rst>; + }; +}; + +&pinctrl { + dp83848c { + dp83848c_rst: dp83848c-rst { + rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir-receiver { + ir_int: ir-int { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + spd_led: spd-led { + rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + host_drv: host-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_io>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + vmmc-supply = <&vcc_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_otg { + vusb_a-supply = <&vcc_io>; + vusb_d-supply = <&vdd_11>; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb2phy_host { + status = "okay"; +}; + +&usb2phy_otg { + status = "okay"; +};