diff mbox series

[v6,13/33] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition

Message ID 20230916001026.315-14-quic_wcheng@quicinc.com
State New
Headers show
Series None | expand

Commit Message

Wesley Cheng Sept. 16, 2023, 12:10 a.m. UTC
Add a new definition for specifying how many XHCI secondary interrupters
can be allocated.  XHCI in general can potentially support up to 1024
interrupters, which some uses may want to limit depending on how many
users utilize the interrupters.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Rob Herring (Arm) Sept. 18, 2023, 8:19 p.m. UTC | #1
On Fri, Sep 15, 2023 at 05:43:45PM -0700, Wesley Cheng wrote:
> Hi Konrad,
> 
> On 9/15/2023 5:35 PM, Konrad Dybcio wrote:
> > On 16.09.2023 02:10, Wesley Cheng wrote:
> > > Add a new definition for specifying how many XHCI secondary interrupters
> > > can be allocated.  XHCI in general can potentially support up to 1024
> > > interrupters, which some uses may want to limit depending on how many
> > > users utilize the interrupters.
> > > 
> > > Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> > > ---
> > Any reason for a DWC3-specific property? Why not just
> > use the XHCI-common one from patch 14 and error out if
> > a value of more than 8 is found?
> > 

I'm pretty sure I said use the common one already...

> 
> Not every XHCI plat user is going to be DWC3.  In case DWC3 is used, the
> DWC3 host driver is the one that populates and adds the XHCI plat device (no
> separate device node for XHCI), so that requires the DWC3 host to also
> populate properties for the XHCI device. (dwc3_host_init())

This binding references usb-xhci.yaml already, so any property from 
there is allowed. Linux needs to handle that regardless of what the 
driver structure/division looks like.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index a696f23730d3..596762ef9b9f 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -376,6 +376,19 @@  properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  snps,num-hc-interrupters:
+    description:
+      Defines the maximum number of XHCI host controller interrupters that can
+      be supported.  The XHCI host controller has support to allocate multiple
+      event rings, which can be assigned to different clients/users.  The DWC3
+      controller has a maximum of 8 interrupters.  If this is not defined then
+      the value will be defaulted to 1.  This parameter is used only when
+      operating in host mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 8
+    default: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: