@@ -187,6 +187,18 @@ &lpuart0 {
status = "okay";
};
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart2>;
+ status = "okay";
+};
+
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart3>;
+ status = "okay";
+};
+
&mu_m0 {
status = "okay";
};
@@ -340,6 +352,20 @@ IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
>;
};
+ pinctrl_lpuart2: lpuart2grp {
+ fsl,pins = <
+ IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020
+ IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020
+ >;
+ };
+
+ pinctrl_lpuart3: lpuart3grp {
+ fsl,pins = <
+ IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020
+ IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021
Enable uart2 and uart3 for imx8qxp-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)