diff mbox series

[v2,7/7] arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3

Message ID 20230925204913.3776656-8-Frank.Li@nxp.com
State Accepted
Commit 5f0a55f6f2e34b2db03b387eae8ff03da72b755b
Headers show
Series arm64: dts: imx8qxp add emda support | expand

Commit Message

Frank Li Sept. 25, 2023, 8:49 p.m. UTC 
Enable uart2 and uart3 for imx8qm-mek board.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 26 ++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 0b34cc2250e1..6d50838ad17d 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -47,6 +47,18 @@  &lpuart0 {
 	status = "okay";
 };
 
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -118,6 +130,20 @@  IMX8QM_UART0_TX_DMA_UART0_TX				0x06000020
 		>;
 	};
 
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QM_UART0_RTS_B_DMA_UART2_RX				0x06000020
+			IMX8QM_UART0_CTS_B_DMA_UART2_TX				0x06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QM_M41_GPIO0_00_DMA_UART3_RX			0x06000020
+			IMX8QM_M41_GPIO0_01_DMA_UART3_TX			0x06000020
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041