@@ -23,6 +23,14 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ clocks {
+ clk40M: can-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
@@ -449,6 +457,20 @@ &sdhc_2 {
status = "okay";
};
+&spi5 {
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2518fd";
+ reg = <0>;
+ interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk40M>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&vdc_5v>;
+ xceiver-supply = <&vdc_5v>;
+ };
+};
+
&tlmm {
lt9611_rst_pin: lt9611-rst-state {
pins = "gpio41";
Enable the Microchip mcp2518fd hosted on the SPI5 bus. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)