@@ -3002,7 +3002,7 @@ static struct gdsc pcie_0_gdsc = {
.name = "pcie_0_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct gdsc pcie_0_phy_gdsc = {
@@ -3011,7 +3011,7 @@ static struct gdsc pcie_0_phy_gdsc = {
.name = "pcie_0_phy_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct gdsc pcie_1_gdsc = {
@@ -3020,7 +3020,7 @@ static struct gdsc pcie_1_gdsc = {
.name = "pcie_1_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct gdsc pcie_1_phy_gdsc = {
@@ -3029,7 +3029,7 @@ static struct gdsc pcie_1_phy_gdsc = {
.name = "pcie_1_phy_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct gdsc ufs_phy_gdsc = {
@@ -3038,7 +3038,7 @@ static struct gdsc ufs_phy_gdsc = {
.name = "ufs_phy_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct gdsc ufs_mem_phy_gdsc = {
@@ -3047,7 +3047,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
.name = "ufs_mem_phy_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct gdsc usb30_prim_gdsc = {
@@ -3056,7 +3056,7 @@ static struct gdsc usb30_prim_gdsc = {
.name = "usb30_prim_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct gdsc usb3_phy_gdsc = {
@@ -3065,7 +3065,7 @@ static struct gdsc usb3_phy_gdsc = {
.name = "usb3_phy_gdsc",
},
.pwrsts = PWRSTS_OFF_ON,
- .flags = POLL_CFG_GDSCR,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
static struct clk_regmap *gcc_sm8550_clocks[] = {
All of the 8550's GCC GDSCs can and should use the retain registers so as not to lose their state when entering lower power modes. Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/clk/qcom/gcc-sm8550.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)