diff mbox series

[v2,1/5] riscv: dts: allwinner: Update opp table to allow CPU frequency scaling

Message ID 20231218110543.64044-2-fusibrandon13@gmail.com
State New
Headers show
Series cpufreq support for the D1 | expand

Commit Message

Brandon Cheo Fusi Dec. 18, 2023, 11:05 a.m. UTC 
Two OPPs are currently defined for the D1/D1s; one at 408MHz and
another at 1.08GHz. Switching between these can be done with the
"sun50i-cpufreq-nvmem" driver. This patch populates the opp table
appropriately, inspired by
https://github.com/Tina-Linux/linux-5.4/blob/master/arch/riscv/boot/dts/sunxi/sun20iw1p1.dtsi

The supply voltages are PWM-controlled, but support for that IP
is still in the works. So stick to a target vdd-cpu supply of 0.9V,
which seems to be the default on most D1 boards.

Signed-off-by: Brandon Cheo Fusi <fusibrandon13@gmail.com>
---
 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
index 64c3c2e6c..2f1771c19 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
@@ -39,16 +39,22 @@  cpu0_intc: interrupt-controller {
 	};
 
 	opp_table_cpu: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "allwinner,sun20i-d1-operating-points",
+				 "allwinner,sun50i-h6-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		nvmem-cell-names = "speed";
+		opp-shared;
 
 		opp-408000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
 			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <900000 900000 1100000>;
+			opp-microvolt-speed0 = <900000 900000 1100000>;
 		};
 
 		opp-1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
 			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <900000 900000 1100000>;
+			opp-microvolt-speed0 = <900000 900000 1100000>;
 		};
 	};
 
@@ -115,3 +121,9 @@  pmu {
 			<0x00000000 0x0000000f 0xffffffff 0xffffffff 0x00020000>;
 	};
 };
+
+&sid {
+	cpu_speed_grade: cpu-speed-grade@0 {
+		reg = <0x00 0x2>;
+	};
+};