diff mbox series

[v5,7/8] iio: adc: ad9467: convert to backend framework

Message ID 20240112-iio-backend-v5-7-bdecad041ab4@analog.com
State Superseded
Headers show
Series iio: add new backend framework | expand

Commit Message

Nuno Sa via B4 Relay Jan. 12, 2024, 4:40 p.m. UTC
From: Nuno Sa <nuno.sa@analog.com>

Convert the driver to use the new IIO backend framework. The device
functionality is expected to be the same (meaning no added or removed
features).

Also note this patch effectively breaks ABI and that's needed so we can
properly support this device and add needed features making use of the
new IIO framework.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
---
 drivers/iio/adc/Kconfig  |   2 +-
 drivers/iio/adc/ad9467.c | 283 ++++++++++++++++++++++++++++++-----------------
 2 files changed, 183 insertions(+), 102 deletions(-)

Comments

Nuno Sá Jan. 15, 2024, 10:08 a.m. UTC | #1
On Fri, 2024-01-12 at 17:33 +0000, Jonathan Cameron wrote:
> On Fri, 12 Jan 2024 17:40:21 +0100
> Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@kernel.org> wrote:
> 
> > From: Nuno Sa <nuno.sa@analog.com>
> > 
> > Convert the driver to use the new IIO backend framework. The device
> > functionality is expected to be the same (meaning no added or removed
> > features).
> > 
> > Also note this patch effectively breaks ABI and that's needed so we can
> > properly support this device and add needed features making use of the
> > new IIO framework.
> > 
> > Signed-off-by: Nuno Sa <nuno.sa@analog.com>
> 
> Hi Nuno,
> 
> Some trivial stuff in here (not I reviewed in reverse so might make more
> sense read that way).  Mostly little changes that will reduce what
> appears to be going on in this patch to the minimum possible
> 
> 
> > +
> >  static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
> >  {
> >  	int ret;
> > @@ -401,19 +419,17 @@ static int ad9467_outputmode_set(struct spi_device
> > *spi, unsigned int mode)
> >  				AN877_ADC_TRANSFER_SYNC);
> >  }
> >  
> > -static int ad9467_scale_fill(struct adi_axi_adc_conv *conv)
> > +static int ad9467_scale_fill(struct ad9467_state *st)
> >  {
> > -	const struct adi_axi_adc_chip_info *info = conv->chip_info;
> > -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
> >  	unsigned int i, val1, val2;
> 	const struct adi_axi_adc_chip_info *info = st->info;
> I think...
> 
> Makes this patch more minimal which is nice and it's not a bad change
> in it's own right..
> 
> Same with some other cases changed by this patch.

Alright, will do it in all the places you pointed out...

> 
> >  
> > -	st->scales = devm_kmalloc_array(&st->spi->dev, info->num_scales,
> > +	st->scales = devm_kmalloc_array(&st->spi->dev, st->info-
> > >num_scales,
> >  					sizeof(*st->scales), GFP_KERNEL);
> >  	if (!st->scales)
> >  		return -ENOMEM;
> >  
> > -	for (i = 0; i < info->num_scales; i++) {
> > -		__ad9467_get_scale(conv, i, &val1, &val2);
> > +	for (i = 0; i < st->info->num_scales; i++) {
> > +		__ad9467_get_scale(st, i, &val1, &val2);
> >  		st->scales[i][0] = val1;
> >  		st->scales[i][1] = val2;
> >  	}
> > @@ -421,11 +437,27 @@ static int ad9467_scale_fill(struct adi_axi_adc_conv
> > *conv)
> >  	return 0;
> >  }
> >  
> > -static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
> > +static int ad9467_setup(struct ad9467_state *st)
> >  {
> > -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
> > +	struct iio_backend_data_fmt data = {
> > +		.sign_extend = true,
> > +		.enable = true,
> > +	};
> > +	unsigned int c, mode;
> > +	int ret;
> > +
> > +	mode = st->info->default_output_mode |
> > AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
> 
> Bit of a long line. Perhaps break it after the |

One of those cases where I think going beyond the 80 limit col helps
readability. But I can break the line if that's your preference.
 
> 
> > +	ret = ad9467_outputmode_set(st->spi, mode);
> > +	if (ret)
> > +		return ret;
> >  
> > -	return ad9467_outputmode_set(st->spi, st->output_mode);
> > +	for (c = 0; c < st->info->num_channels; c++) {
> > +		ret = iio_backend_data_format_set(st->back, c, &data);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	return 0;
> >  }
> >  
> >  static int ad9467_reset(struct device *dev)
> > @@ -443,25 +475,64 @@ static int ad9467_reset(struct device *dev)
> >  	return 0;
> >  }
> >  
> > +static int ad9467_iio_backend_get(struct ad9467_state *st)
> > +{
> > +	struct device *dev = &st->spi->dev;
> > +	struct device_node *__back;
> > +
> > +	st->back = devm_iio_backend_get(&st->spi->dev, NULL);
> > +	/* If not found, don't error out as we might have legacy DT
> > property */
> > +	if (IS_ERR(st->back) && PTR_ERR(st->back) != -ENOENT)
> > +		return PTR_ERR(st->back);
> > +	if (!IS_ERR(st->back))
> > +		return 0;
> Why not do this one first? I know I normally moan about having error handlers
> out of line, but in this case the good is out of line whatever.
> 
> 	if (!IS_ERR(st->back)
> 		return 0;
> 
> 	if (PTR_ERR(st->back) != ENOENT)
> 		return PTR_ERR(st->back);
> 
> 	...

Yeah, really because I wanted to have the error condition checked first. But I
agree in this particular case it makes the code simpler by not doing it that
way.

> 
> 
> > +	/*
> > +	 * if we don't get the backend using the normal API's, use the
> > legacy
> > +	 * 'adi,adc-dev' property. So we get all nodes with that property,
> > and
> > +	 * look for the one pointing at us. Then we directly lookup that
> > fwnode
> > +	 * on the backend list of registered devices. This is done so we
> > don't
> > +	 * make io-backends mandatory which would break DT ABI.
> > +	 */
> > +	for_each_node_with_property(__back, "adi,adc-dev") {
> > +		struct device_node *__me;
> > +
> > +		__me = of_parse_phandle(__back, "adi,adc-dev", 0);
> > +		if (!__me)
> > +			continue;
> > +
> > +		if (!device_match_of_node(dev, __me)) {
> > +			of_node_put(__me);
> > +			continue;
> > +		}
> > +
> > +		of_node_put(__me);
> > +		st->back = __devm_iio_backend_get_from_fwnode_lookup(dev,
> > +								    
> > of_fwnode_handle(__back));
> > +		of_node_put(__back);
> > +		return PTR_ERR_OR_ZERO(st->back);
> > +	}
> > +
> > +	return -ENODEV;
> > +}
> > +
> >  static int ad9467_probe(struct spi_device *spi)
> >  {
> > 
> 
> >  
> > -	st->output_mode = info->default_output_mode |
> > -			  AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
> > +	ret = ad9467_iio_backend_get(st);
> > +	if (ret)
> > +		return ret;
> >  
> > -	return 0;
> > +	ret = devm_iio_backend_request_buffer(&spi->dev, st->back,
> > indio_dev);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = iio_backend_enable(st->back);
> > +	if (ret)
> > +		return ret;
> 
> I'm curious there is no iio_backend_disable() to be done in the exit path?
> 

Ehehe something I have in my mind, yes. I'm just not disabling the core because
it was the same with the previous approach. My goal was to have (more or less)
the same state before vs after introducing the backend. I was thinking in adding
a devm_iio_backend_enable() as a follow up patch and use it in here (or actually
use it for the first axi-dac/dds user as that one will be come from a "clean"
state).

If you prefer I can already turn iio_backend_enable() ->
devm_iio_backend_enable() and use it in this patch.

- Nuno Sá
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 3b73c509bd68..6793faacb4dc 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -291,7 +291,7 @@  config AD799X
 config AD9467
 	tristate "Analog Devices AD9467 High Speed ADC driver"
 	depends on SPI
-	depends on ADI_AXI_ADC
+	select IIO_BACKEND
 	help
 	  Say yes here to build support for Analog Devices:
 	  * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
index 6581fce4ba95..b09f1ca9ad38 100644
--- a/drivers/iio/adc/ad9467.c
+++ b/drivers/iio/adc/ad9467.c
@@ -17,13 +17,12 @@ 
 #include <linux/of.h>
 
 
+#include <linux/iio/backend.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
 #include <linux/clk.h>
 
-#include <linux/iio/adc/adi-axi-adc.h>
-
 /*
  * ADI High-Speed ADC common spi interface registers
  * See Application-Note AN-877:
@@ -102,15 +101,20 @@ 
 #define AD9467_REG_VREF_MASK		0x0F
 
 struct ad9467_chip_info {
-	struct adi_axi_adc_chip_info	axi_adc_info;
-	unsigned int			default_output_mode;
-	unsigned int			vref_mask;
+	const char		*name;
+	unsigned int		id;
+	const struct		iio_chan_spec *channels;
+	unsigned int		num_channels;
+	const unsigned int	(*scale_table)[2];
+	int			num_scales;
+	unsigned long		max_rate;
+	unsigned int		default_output_mode;
+	unsigned int		vref_mask;
 };
 
-#define to_ad9467_chip_info(_info)	\
-	container_of(_info, struct ad9467_chip_info, axi_adc_info)
-
 struct ad9467_state {
+	const struct ad9467_chip_info	*info;
+	struct iio_backend		*back;
 	struct spi_device		*spi;
 	struct clk			*clk;
 	unsigned int			output_mode;
@@ -151,10 +155,10 @@  static int ad9467_spi_write(struct spi_device *spi, unsigned int reg,
 	return spi_write(spi, buf, ARRAY_SIZE(buf));
 }
 
-static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
+static int ad9467_reg_access(struct iio_dev *indio_dev, unsigned int reg,
 			     unsigned int writeval, unsigned int *readval)
 {
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	struct ad9467_state *st = iio_priv(indio_dev);
 	struct spi_device *spi = st->spi;
 	int ret;
 
@@ -191,14 +195,13 @@  static const unsigned int ad9467_scale_table[][2] = {
 	{2300, 8}, {2400, 9}, {2500, 10},
 };
 
-static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index,
+static void __ad9467_get_scale(struct ad9467_state *st, int index,
 			       unsigned int *val, unsigned int *val2)
 {
-	const struct adi_axi_adc_chip_info *info = conv->chip_info;
-	const struct iio_chan_spec *chan = &info->channels[0];
+	const struct iio_chan_spec *chan = &st->info->channels[0];
 	unsigned int tmp;
 
-	tmp = (info->scale_table[index][0] * 1000000ULL) >>
+	tmp = (st->info->scale_table[index][0] * 1000000ULL) >>
 			chan->scan_type.realbits;
 	*val = tmp / 1000000;
 	*val2 = tmp % 1000000;
@@ -229,52 +232,43 @@  static const struct iio_chan_spec ad9467_channels[] = {
 };
 
 static const struct ad9467_chip_info ad9467_chip_tbl = {
-	.axi_adc_info = {
-		.name = "ad9467",
-		.id = CHIPID_AD9467,
-		.max_rate = 250000000UL,
-		.scale_table = ad9467_scale_table,
-		.num_scales = ARRAY_SIZE(ad9467_scale_table),
-		.channels = ad9467_channels,
-		.num_channels = ARRAY_SIZE(ad9467_channels),
-	},
+	.name = "ad9467",
+	.id = CHIPID_AD9467,
+	.max_rate = 250000000UL,
+	.scale_table = ad9467_scale_table,
+	.num_scales = ARRAY_SIZE(ad9467_scale_table),
+	.channels = ad9467_channels,
+	.num_channels = ARRAY_SIZE(ad9467_channels),
 	.default_output_mode = AD9467_DEF_OUTPUT_MODE,
 	.vref_mask = AD9467_REG_VREF_MASK,
 };
 
 static const struct ad9467_chip_info ad9434_chip_tbl = {
-	.axi_adc_info = {
-		.name = "ad9434",
-		.id = CHIPID_AD9434,
-		.max_rate = 500000000UL,
-		.scale_table = ad9434_scale_table,
-		.num_scales = ARRAY_SIZE(ad9434_scale_table),
-		.channels = ad9434_channels,
-		.num_channels = ARRAY_SIZE(ad9434_channels),
-	},
+	.name = "ad9434",
+	.id = CHIPID_AD9434,
+	.max_rate = 500000000UL,
+	.scale_table = ad9434_scale_table,
+	.num_scales = ARRAY_SIZE(ad9434_scale_table),
+	.channels = ad9434_channels,
+	.num_channels = ARRAY_SIZE(ad9434_channels),
 	.default_output_mode = AD9434_DEF_OUTPUT_MODE,
 	.vref_mask = AD9434_REG_VREF_MASK,
 };
 
 static const struct ad9467_chip_info ad9265_chip_tbl = {
-	.axi_adc_info = {
-		.name = "ad9265",
-		.id = CHIPID_AD9265,
-		.max_rate = 125000000UL,
-		.scale_table = ad9265_scale_table,
-		.num_scales = ARRAY_SIZE(ad9265_scale_table),
-		.channels = ad9467_channels,
-		.num_channels = ARRAY_SIZE(ad9467_channels),
-	},
+	.name = "ad9265",
+	.id = CHIPID_AD9265,
+	.max_rate = 125000000UL,
+	.scale_table = ad9265_scale_table,
+	.num_scales = ARRAY_SIZE(ad9265_scale_table),
+	.channels = ad9467_channels,
+	.num_channels = ARRAY_SIZE(ad9467_channels),
 	.default_output_mode = AD9265_DEF_OUTPUT_MODE,
 	.vref_mask = AD9265_REG_VREF_MASK,
 };
 
-static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
+static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2)
 {
-	const struct adi_axi_adc_chip_info *info = conv->chip_info;
-	const struct ad9467_chip_info *info1 = to_ad9467_chip_info(info);
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
 	unsigned int i, vref_val;
 	int ret;
 
@@ -282,25 +276,23 @@  static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
 	if (ret < 0)
 		return ret;
 
-	vref_val = ret & info1->vref_mask;
+	vref_val = ret & st->info->vref_mask;
 
-	for (i = 0; i < info->num_scales; i++) {
-		if (vref_val == info->scale_table[i][1])
+	for (i = 0; i < st->info->num_scales; i++) {
+		if (vref_val == st->info->scale_table[i][1])
 			break;
 	}
 
-	if (i == info->num_scales)
+	if (i == st->info->num_scales)
 		return -ERANGE;
 
-	__ad9467_get_scale(conv, i, val, val2);
+	__ad9467_get_scale(st, i, val, val2);
 
 	return IIO_VAL_INT_PLUS_MICRO;
 }
 
-static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
+static int ad9467_set_scale(struct ad9467_state *st, int val, int val2)
 {
-	const struct adi_axi_adc_chip_info *info = conv->chip_info;
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
 	unsigned int scale_val[2];
 	unsigned int i;
 	int ret;
@@ -308,14 +300,14 @@  static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
 	if (val != 0)
 		return -EINVAL;
 
-	for (i = 0; i < info->num_scales; i++) {
-		__ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]);
+	for (i = 0; i < st->info->num_scales; i++) {
+		__ad9467_get_scale(st, i, &scale_val[0], &scale_val[1]);
 		if (scale_val[0] != val || scale_val[1] != val2)
 			continue;
 
 		guard(mutex)(&st->lock);
 		ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
-				       info->scale_table[i][1]);
+				       st->info->scale_table[i][1]);
 		if (ret < 0)
 			return ret;
 
@@ -326,15 +318,15 @@  static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
 	return -EINVAL;
 }
 
-static int ad9467_read_raw(struct adi_axi_adc_conv *conv,
+static int ad9467_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
 			   int *val, int *val2, long m)
 {
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	struct ad9467_state *st = iio_priv(indio_dev);
 
 	switch (m) {
 	case IIO_CHAN_INFO_SCALE:
-		return ad9467_get_scale(conv, val, val2);
+		return ad9467_get_scale(st, val, val2);
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*val = clk_get_rate(st->clk);
 
@@ -344,20 +336,19 @@  static int ad9467_read_raw(struct adi_axi_adc_conv *conv,
 	}
 }
 
-static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
+static int ad9467_write_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int val, int val2, long mask)
 {
-	const struct adi_axi_adc_chip_info *info = conv->chip_info;
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	struct ad9467_state *st = iio_priv(indio_dev);
 	long r_clk;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
-		return ad9467_set_scale(conv, val, val2);
+		return ad9467_set_scale(st, val, val2);
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		r_clk = clk_round_rate(st->clk, val);
-		if (r_clk < 0 || r_clk > info->max_rate) {
+		if (r_clk < 0 || r_clk > st->info->max_rate) {
 			dev_warn(&st->spi->dev,
 				 "Error setting ADC sample rate %ld", r_clk);
 			return -EINVAL;
@@ -369,26 +360,53 @@  static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
 	}
 }
 
-static int ad9467_read_avail(struct adi_axi_adc_conv *conv,
+static int ad9467_read_avail(struct iio_dev *indio_dev,
 			     struct iio_chan_spec const *chan,
 			     const int **vals, int *type, int *length,
 			     long mask)
 {
-	const struct adi_axi_adc_chip_info *info = conv->chip_info;
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	struct ad9467_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
 		*vals = (const int *)st->scales;
 		*type = IIO_VAL_INT_PLUS_MICRO;
 		/* Values are stored in a 2D matrix */
-		*length = info->num_scales * 2;
+		*length = st->info->num_scales * 2;
 		return IIO_AVAIL_LIST;
 	default:
 		return -EINVAL;
 	}
 }
 
+static int ad9467_update_scan_mode(struct iio_dev *indio_dev,
+				   const unsigned long *scan_mask)
+{
+	struct ad9467_state *st = iio_priv(indio_dev);
+	unsigned int c;
+	int ret;
+
+	for (c = 0; c < st->info->num_channels; c++) {
+		if (test_bit(c, scan_mask))
+			ret = iio_backend_chan_enable(st->back, c);
+		else
+			ret = iio_backend_chan_disable(st->back, c);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct iio_info ad9467_info = {
+	.read_raw = ad9467_read_raw,
+	.write_raw = ad9467_write_raw,
+	.update_scan_mode = ad9467_update_scan_mode,
+	.debugfs_reg_access = ad9467_reg_access,
+	.read_avail = ad9467_read_avail,
+};
+
 static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
 {
 	int ret;
@@ -401,19 +419,17 @@  static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
 				AN877_ADC_TRANSFER_SYNC);
 }
 
-static int ad9467_scale_fill(struct adi_axi_adc_conv *conv)
+static int ad9467_scale_fill(struct ad9467_state *st)
 {
-	const struct adi_axi_adc_chip_info *info = conv->chip_info;
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
 	unsigned int i, val1, val2;
 
-	st->scales = devm_kmalloc_array(&st->spi->dev, info->num_scales,
+	st->scales = devm_kmalloc_array(&st->spi->dev, st->info->num_scales,
 					sizeof(*st->scales), GFP_KERNEL);
 	if (!st->scales)
 		return -ENOMEM;
 
-	for (i = 0; i < info->num_scales; i++) {
-		__ad9467_get_scale(conv, i, &val1, &val2);
+	for (i = 0; i < st->info->num_scales; i++) {
+		__ad9467_get_scale(st, i, &val1, &val2);
 		st->scales[i][0] = val1;
 		st->scales[i][1] = val2;
 	}
@@ -421,11 +437,27 @@  static int ad9467_scale_fill(struct adi_axi_adc_conv *conv)
 	return 0;
 }
 
-static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
+static int ad9467_setup(struct ad9467_state *st)
 {
-	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+	struct iio_backend_data_fmt data = {
+		.sign_extend = true,
+		.enable = true,
+	};
+	unsigned int c, mode;
+	int ret;
+
+	mode = st->info->default_output_mode | AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
+	ret = ad9467_outputmode_set(st->spi, mode);
+	if (ret)
+		return ret;
 
-	return ad9467_outputmode_set(st->spi, st->output_mode);
+	for (c = 0; c < st->info->num_channels; c++) {
+		ret = iio_backend_data_format_set(st->back, c, &data);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int ad9467_reset(struct device *dev)
@@ -443,25 +475,64 @@  static int ad9467_reset(struct device *dev)
 	return 0;
 }
 
+static int ad9467_iio_backend_get(struct ad9467_state *st)
+{
+	struct device *dev = &st->spi->dev;
+	struct device_node *__back;
+
+	st->back = devm_iio_backend_get(&st->spi->dev, NULL);
+	/* If not found, don't error out as we might have legacy DT property */
+	if (IS_ERR(st->back) && PTR_ERR(st->back) != -ENOENT)
+		return PTR_ERR(st->back);
+	if (!IS_ERR(st->back))
+		return 0;
+	/*
+	 * if we don't get the backend using the normal API's, use the legacy
+	 * 'adi,adc-dev' property. So we get all nodes with that property, and
+	 * look for the one pointing at us. Then we directly lookup that fwnode
+	 * on the backend list of registered devices. This is done so we don't
+	 * make io-backends mandatory which would break DT ABI.
+	 */
+	for_each_node_with_property(__back, "adi,adc-dev") {
+		struct device_node *__me;
+
+		__me = of_parse_phandle(__back, "adi,adc-dev", 0);
+		if (!__me)
+			continue;
+
+		if (!device_match_of_node(dev, __me)) {
+			of_node_put(__me);
+			continue;
+		}
+
+		of_node_put(__me);
+		st->back = __devm_iio_backend_get_from_fwnode_lookup(dev,
+								     of_fwnode_handle(__back));
+		of_node_put(__back);
+		return PTR_ERR_OR_ZERO(st->back);
+	}
+
+	return -ENODEV;
+}
+
 static int ad9467_probe(struct spi_device *spi)
 {
-	const struct ad9467_chip_info *info;
-	struct adi_axi_adc_conv *conv;
+	struct iio_dev *indio_dev;
 	struct ad9467_state *st;
 	unsigned int id;
 	int ret;
 
-	info = spi_get_device_match_data(spi);
-	if (!info)
-		return -ENODEV;
-
-	conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st));
-	if (IS_ERR(conv))
-		return PTR_ERR(conv);
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
 
-	st = adi_axi_adc_conv_priv(conv);
+	st = iio_priv(indio_dev);
 	st->spi = spi;
 
+	st->info = spi_get_device_match_data(spi);
+	if (!st->info)
+		return -ENODEV;
+
 	st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
 	if (IS_ERR(st->clk))
 		return PTR_ERR(st->clk);
@@ -475,29 +546,39 @@  static int ad9467_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	conv->chip_info = &info->axi_adc_info;
-
-	ret = ad9467_scale_fill(conv);
+	ret = ad9467_scale_fill(st);
 	if (ret)
 		return ret;
 
 	id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID);
-	if (id != conv->chip_info->id) {
+	if (id != st->info->id) {
 		dev_err(&spi->dev, "Mismatch CHIP_ID, got 0x%X, expected 0x%X\n",
-			id, conv->chip_info->id);
+			id, st->info->id);
 		return -ENODEV;
 	}
 
-	conv->reg_access = ad9467_reg_access;
-	conv->write_raw = ad9467_write_raw;
-	conv->read_raw = ad9467_read_raw;
-	conv->read_avail = ad9467_read_avail;
-	conv->preenable_setup = ad9467_preenable_setup;
+	indio_dev->name = st->info->name;
+	indio_dev->channels = st->info->channels;
+	indio_dev->num_channels = st->info->num_channels;
+	indio_dev->info = &ad9467_info;
 
-	st->output_mode = info->default_output_mode |
-			  AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
+	ret = ad9467_iio_backend_get(st);
+	if (ret)
+		return ret;
 
-	return 0;
+	ret = devm_iio_backend_request_buffer(&spi->dev, st->back, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = iio_backend_enable(st->back);
+	if (ret)
+		return ret;
+
+	ret = ad9467_setup(st);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
 static const struct of_device_id ad9467_of_match[] = {
@@ -529,4 +610,4 @@  module_spi_driver(ad9467_driver);
 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
 MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver");
 MODULE_LICENSE("GPL v2");
-MODULE_IMPORT_NS(IIO_ADI_AXI);
+MODULE_IMPORT_NS(IIO_BACKEND);