@@ -1785,13 +1785,12 @@ pcie4_phy: phy@1c06000 {
compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy";
reg = <0x0 0x01c06000 0x0 0x2000>;
- clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
- <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+ clocks = <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
<&gcc GCC_PCIE_4_CLKREF_CLK>,
<&gcc GCC_PCIE4_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_4_PIPE_CLK>,
<&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "rchng",
+ clock-names = "cfg_ahb", "ref", "rchng",
"pipe", "pipediv2";
assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>;
@@ -1883,13 +1882,12 @@ pcie3b_phy: phy@1c0e000 {
compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
reg = <0x0 0x01c0e000 0x0 0x2000>;
- clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
- <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+ clocks = <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
<&gcc GCC_PCIE3B_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_3B_PIPE_CLK>,
<&gcc GCC_PCIE_3B_PIPEDIV2_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "rchng",
+ clock-names = "cfg_ahb", "ref", "rchng",
"pipe", "pipediv2";
assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>;
@@ -1982,13 +1980,12 @@ pcie3a_phy: phy@1c14000 {
reg = <0x0 0x01c14000 0x0 0x2000>,
<0x0 0x01c16000 0x0 0x2000>;
- clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
- <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+ clocks = <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
<&gcc GCC_PCIE3A_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_3A_PIPE_CLK>,
<&gcc GCC_PCIE_3A_PIPEDIV2_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "rchng",
+ clock-names = "cfg_ahb", "ref", "rchng",
"pipe", "pipediv2";
assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>;
@@ -2082,13 +2079,12 @@ pcie2b_phy: phy@1c1e000 {
compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
reg = <0x0 0x01c1e000 0x0 0x2000>;
- clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
- <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+ clocks = <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
<&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_2B_PIPE_CLK>,
<&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "rchng",
+ clock-names = "cfg_ahb", "ref", "rchng",
"pipe", "pipediv2";
assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>;
@@ -2181,13 +2177,12 @@ pcie2a_phy: phy@1c24000 {
reg = <0x0 0x01c24000 0x0 0x2000>,
<0x0 0x01c26000 0x0 0x2000>;
- clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
- <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+ clocks = <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
<&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_2A_PIPE_CLK>,
<&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "rchng",
+ clock-names = "cfg_ahb", "ref", "rchng",
"pipe", "pipediv2";
assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>;
PCIe PHY hw doesn't require PCIE_AUX_CLK for functioning. This clock is only required by the PCIe controller. Hence drop it from pcie_phy nodes. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-)