diff mbox series

[v4,03/10] of: fdt: Add generic support for parsing elf core headers property

Message ID 24d93c713f6faeaee6105f57c3d94ac17f12405f.1626266516.git.geert+renesas@glider.be
State New
Headers show
Series Add generic support for kdump DT properties | expand

Commit Message

Geert Uytterhoeven July 14, 2021, 12:50 p.m. UTC
There are two methods to specify the location of the elf core headers:
using the "elfcorehdr=" kernel parameter, as handled by generic code in
kernel/crash_dump.c, or using the "linux,elfcorehdr" property under the
"/chosen" node in the Device Tree, as handled by architecture-specific
code in arch/arm64/mm/init.c.

Extend support for "linux,elfcorehdr" to all platforms supporting DT by
adding platform-agnostic handling for parsing this property to the FDT
core code.  This can co-exist safely with the architecture-specific
parsing, until the latter has been removed.

This requires moving the call to of_scan_flat_dt() up, as the code
scanning the "/chosen" node now needs to be aware of the values of
"#address-cells" and "#size-cells".

Architecture-specific code still has to reserve the memory used by the
elf core headers, if present.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
About the change to chosen.txt: I have a similar change for
schemas/chosen.yaml in dt-schema.

v4:
  - Use IS_ENABLED() instead of #ifdef,
  - Clarify what architecture-specific code is still responsible for.
---
 Documentation/devicetree/bindings/chosen.txt |  6 ++--
 drivers/of/fdt.c                             | 34 ++++++++++++++++++--
 2 files changed, 34 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index 45e79172a646c537..5b0b94eb2d04e79d 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -106,9 +106,9 @@  respectively, of the root node.
 linux,elfcorehdr
 ----------------
 
-This property (currently used only on arm64) holds the memory range,
-the address and the size, of the elf core header which mainly describes
-the panicked kernel's memory layout as PT_LOAD segments of elf format.
+This property holds the memory range, the address and the size, of the elf
+core header which mainly describes the panicked kernel's memory layout as
+PT_LOAD segments of elf format.
 e.g.
 
 / {
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 344f16bb04ccf081..f797d52c5b492cb7 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -8,6 +8,7 @@ 
 
 #define pr_fmt(fmt)	"OF: fdt: " fmt
 
+#include <linux/crash_dump.h>
 #include <linux/crc32.h>
 #include <linux/kernel.h>
 #include <linux/initrd.h>
@@ -908,6 +909,32 @@  static inline void early_init_dt_check_for_initrd(unsigned long node)
 }
 #endif /* CONFIG_BLK_DEV_INITRD */
 
+/**
+ * early_init_dt_check_for_elfcorehdr - Decode elfcorehdr location from flat
+ * tree
+ * @node: reference to node containing elfcorehdr location ('chosen')
+ */
+static void __init early_init_dt_check_for_elfcorehdr(unsigned long node)
+{
+	const __be32 *prop;
+	int len;
+
+	if (!IS_ENABLED(CONFIG_CRASH_DUMP))
+		return;
+
+	pr_debug("Looking for elfcorehdr property... ");
+
+	prop = of_get_flat_dt_prop(node, "linux,elfcorehdr", &len);
+	if (!prop || (len < (dt_root_addr_cells + dt_root_size_cells)))
+		return;
+
+	elfcorehdr_addr = dt_mem_next_cell(dt_root_addr_cells, &prop);
+	elfcorehdr_size = dt_mem_next_cell(dt_root_size_cells, &prop);
+
+	pr_debug("elfcorehdr_start=0x%llx elfcorehdr_size=0x%llx\n",
+		 elfcorehdr_addr, elfcorehdr_size);
+}
+
 #ifdef CONFIG_SERIAL_EARLYCON
 
 int __init early_init_dt_scan_chosen_stdout(void)
@@ -1055,6 +1082,7 @@  int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 		return 0;
 
 	early_init_dt_check_for_initrd(node);
+	early_init_dt_check_for_elfcorehdr(node);
 
 	/* Retrieve command line */
 	p = of_get_flat_dt_prop(node, "bootargs", &l);
@@ -1199,14 +1227,14 @@  void __init early_init_dt_scan_nodes(void)
 {
 	int rc = 0;
 
+	/* Initialize {size,address}-cells info */
+	of_scan_flat_dt(early_init_dt_scan_root, NULL);
+
 	/* Retrieve various information from the /chosen node */
 	rc = of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
 	if (!rc)
 		pr_warn("No chosen node found, continuing without\n");
 
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-
 	/* Setup memory, calling early_init_dt_add_memory_arch */
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 }