diff mbox series

[5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding

Message ID 440a7cad-d48f-8975-4dfd-265b235bf629@gmail.com
State Accepted
Commit 6a22a5dbc69473c2c46d1a13fe6cbc7bdaacb2a6
Headers show
Series soc: amlogic: switch bindings to yaml and adjust some dtbs's | expand

Commit Message

Heiner Kallweit Jan. 23, 2023, 9:28 p.m. UTC
Add Amlogic Meson vrtc controller binding.
Tested with make targets dt_binding_check and dtbs_check.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 .../bindings/rtc/amlogic,meson-vrtc.yaml      | 50 +++++++++++++++++++
 .../bindings/rtc/rtc-meson-vrtc.txt           | 22 --------
 2 files changed, 50 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
 delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt

Comments

Rob Herring Jan. 25, 2023, 7:19 p.m. UTC | #1
On Mon, Jan 23, 2023 at 10:28:49PM +0100, Heiner Kallweit wrote:
> Add Amlogic Meson vrtc controller binding.

You are not adding, you are converting.

> Tested with make targets dt_binding_check and dtbs_check.

That's assumed...

> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
>  .../bindings/rtc/amlogic,meson-vrtc.yaml      | 50 +++++++++++++++++++
>  .../bindings/rtc/rtc-meson-vrtc.txt           | 22 --------
>  2 files changed, 50 insertions(+), 22 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
>  delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> new file mode 100644
> index 000000000..26a70b3ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Virtual RTC (VRTC)
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +description: |
> +  This is a Linux interface to an RTC managed by firmware, hence it's
> +  virtual from a Linux perspective.  The interface is 1 register where
> +  an alarm time (in seconds) is to be written.
> +  The alarm register is a simple scratch register shared between the
> +  application processors (AP) and the secure co-processor (SCP.)  When
> +  the AP suspends, the SCP will use the value of this register to
> +  program an always-on timer before going sleep. When the timer expires,
> +  the SCP will wake up and will then wake the AP.
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,meson-vrtc
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    bus@ff800000 {
> +      reg = <0x0 0xff800000 0x0 0x100000>;
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      rtc@a8 {
> +        compatible = "amlogic,meson-vrtc";
> +        reg = <0x0 0x000a8 0x0 0x4>;

Just use 1 address/size cell here and then you don't need the bus node 
(which has an error in it (no ranges)).

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
new file mode 100644
index 000000000..26a70b3ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
@@ -0,0 +1,50 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Virtual RTC (VRTC)
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  This is a Linux interface to an RTC managed by firmware, hence it's
+  virtual from a Linux perspective.  The interface is 1 register where
+  an alarm time (in seconds) is to be written.
+  The alarm register is a simple scratch register shared between the
+  application processors (AP) and the secure co-processor (SCP.)  When
+  the AP suspends, the SCP will use the value of this register to
+  program an always-on timer before going sleep. When the timer expires,
+  the SCP will wake up and will then wake the AP.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-vrtc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@ff800000 {
+      reg = <0x0 0xff800000 0x0 0x100000>;
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      rtc@a8 {
+        compatible = "amlogic,meson-vrtc";
+        reg = <0x0 0x000a8 0x0 0x4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
deleted file mode 100644
index c014f54a9..000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
+++ /dev/null
@@ -1,22 +0,0 @@ 
-* Amlogic Virtual RTC (VRTC)
-
-This is a Linux interface to an RTC managed by firmware, hence it's
-virtual from a Linux perspective.  The interface is 1 register where
-an alarm time (in seconds) is to be written.
-
-Required properties:
-- compatible: should be "amlogic,meson-vrtc"
-- reg: physical address for the alarm register
-
-The alarm register is a simple scratch register shared between the
-application processors (AP) and the secure co-processor (SCP.)  When
-the AP suspends, the SCP will use the value of this register to
-program an always-on timer before going sleep. When the timer expires,
-the SCP will wake up and will then wake the AP.
-
-Example:
-
-	vrtc: rtc@0a8 {
-		compatible = "amlogic,meson-vrtc";
-		reg = <0x0 0x000a8 0x0 0x4>;
-	};