diff mbox series

[3/3] ARM: dts: at91: Return to boolean properties

Message ID 6f06be9e393c02563bc877498c8af75daf3b47f8.1684313910.git.Ryan.Wanner@microchip.com
State Accepted
Commit 1ebc72ceef2613ba39eaad6caa723a4ff0a04473
Headers show
Series [1/3] pinctrl: at91-pio4: Enable Push-Pull configuration | expand

Commit Message

Ryan Wanner May 17, 2023, 11:54 a.m. UTC 
From: Ryan Wanner <Ryan.Wanner@microchip.com>

Returning back to commit 0dc23d1a8e17
("arm: dts: at91: Fix boolean properties with values") as pinctrl driver no
longer expects an integer value and expects a simple boolean property.

Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
 arch/arm/boot/dts/at91-kizbox3-hs.dts      | 2 +-
 arch/arm/boot/dts/at91-kizbox3_common.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 7075df6549e9..fec7269088d1 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -225,7 +225,7 @@  pinctrl_pio_zbe_rst: gpio_zbe_rst {
 		pinctrl_pio_io_reset: gpio_io_reset {
 			pinmux = <PIN_PB30__GPIO>;
 			bias-disable;
-			drive-open-drain = <1>;
+			drive-open-drain;
 			output-low;
 		};
 		pinctrl_pio_input: gpio_input {
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index abe27adfa4d6..465664628419 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -211,7 +211,7 @@  pinctrl_flx4_default: flx4_i2c6_default {
 		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
 		<PIN_PD13__FLEXCOM4_IO1>; //CLK
 		bias-disable;
-		drive-open-drain = <1>;
+		drive-open-drain;
 	};
 
 	pinctrl_pwm0 {