From patchwork Mon Mar 30 13:32:17 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michal Simek X-Patchwork-Id: 202636 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.6 required=3.0 tests=DKIM_INVALID,DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id AAEDEC2D0F0 for ; Mon, 30 Mar 2020 13:32:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 6378320780 for ; Mon, 30 Mar 2020 13:32:37 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=monstr-eu.20150623.gappssmtp.com header.i=@monstr-eu.20150623.gappssmtp.com header.b="q3HwXhw/" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727915AbgC3Ncg (ORCPT ); Mon, 30 Mar 2020 09:32:36 -0400 Received: from mail-wm1-f67.google.com ([209.85.128.67]:33225 "EHLO mail-wm1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727696AbgC3Ncb (ORCPT ); Mon, 30 Mar 2020 09:32:31 -0400 Received: by mail-wm1-f67.google.com with SMTP id z14so3194201wmf.0 for ; Mon, 30 Mar 2020 06:32:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=monstr-eu.20150623.gappssmtp.com; s=20150623; h=sender:from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=JZjWbXNPNDso2IbgPyxZDNMmgqiaWWsLO5DMmS/dNW8=; b=q3HwXhw/AoV7n2wIO9x24v8x13bFRDR2z2GZqCS2IkG8I3zVDUs4KRsGpYJSJI3GZo AS4MdAto3ksAghXxMSsFE709ifzUngBFdr2mj6JELM3mbvtvgfz/XBaJpA9LNWj8h3oT rXERqJABuMhMqNpdM3Fij6EzncUMtMUS1voHtyoazKdvoMhR5+hzlg6A/K+DTt3prNdB v9H/VOap7sxHYgBHiXzCqJXlhCuTvLA1nRYdtNjGXvu76LZf1dIXLbhRF+GMOgwASC9t K1PpR742k7SkIXnTk5COju+a0oayJGGexHBa9pdmfgwJOQaVzhZikfpxdbcei6EBE/gh ybPA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id :in-reply-to:references:mime-version:content-transfer-encoding; bh=JZjWbXNPNDso2IbgPyxZDNMmgqiaWWsLO5DMmS/dNW8=; b=UFNhQm8WuTA+x1zrpgg/eIvvHLvgbqGHgBVv8vRVagAj1i2l+xmysBeyAXnPl5UX8f /HPL7mWadoMv977jfvJqYP2EwvxvcTVJUA7xI+1hi1/gzVPybYNucUUmfjGs5XO/gwCY gc+eHKjuUQIMely0Ht5xBLfcxVZEJFC/sg4Wdnx8u2SNPM13IY838ijIeV+oQ7v3c2UC GK6hV5gMYbhTDx+zvf+Aqzw+A6FYtmi+qrMOfY7L2qBFncRHPXk3EvxvZg0mN3Ee81f7 rKB3lV5BfIiSws/LW4HFx4yYoEEO/NJ6qNQ5G/u4DGiXDPnTsmvwqOVECQvVunmwP53v kJjg== X-Gm-Message-State: ANhLgQ1q9kOLNMNtUwWDwrHhac+mzcwVdm9DcQgr2b7666uulTR4JLpH /IqDZ9hFG9y5AmbHMlthExT+uA== X-Google-Smtp-Source: ADFU+vvdniTqidjqKrMGa9gHW4sCz71LV5HX5iRN3VuFZfL4RO0xpQctSwCLMHA8IbQM2YVqrJhXTA== X-Received: by 2002:a7b:c185:: with SMTP id y5mr13689917wmi.90.1585575143402; Mon, 30 Mar 2020 06:32:23 -0700 (PDT) Received: from localhost (nat-35.starnet.cz. [178.255.168.35]) by smtp.gmail.com with ESMTPSA id l12sm21742475wrt.73.2020.03.30.06.32.22 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Mon, 30 Mar 2020 06:32:22 -0700 (PDT) From: Michal Simek To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com, sfr@canb.auug.org.au, maz@kernel.org Cc: Arnd Bergmann , Alexios Zavras , Alistair Popple , Allison Randal , Andrew Donnellan , Andy Shevchenko , Bartlomiej Zolnierkiewicz , Benjamin Herrenschmidt , Christophe Leroy , "David S. Miller" , "Desnes A. Nunes do Rosario" , Dmitry Vyukov , Enrico Weigelt , Fabio Estevam , Geert Uytterhoeven , Greg Kroah-Hartman , Jonathan Cameron , Jonathan Corbet , Kate Stewart , Krzysztof Kozlowski , Mark Rutland , Masahiro Yamada , Matt Porter , Mauro Carvalho Chehab , Michael Ellerman , Miquel Raynal , Nicholas Piggin , Nick Desaulniers , Paul Mackerras , Rob Herring , Sasha Levin , Thiago Jung Bauermann , Thomas Gleixner , Wei Hu , YueHaibing , devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org, linux-fbdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Subject: [PATCH v2 2/2] powerpc: Remove Xilinx PPC405/PPC440 support Date: Mon, 30 Mar 2020 15:32:17 +0200 Message-Id: <9c3e02ffa9812c6f046708b45932d40f33e8817a.1585575111.git.michal.simek@xilinx.com> X-Mailer: git-send-email 2.26.0 In-Reply-To: References: MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The latest Xilinx design tools called ISE and EDK has been released in October 2013. New tool doesn't support any PPC405/PPC440 new designs. These platforms are no longer supported and tested. PowerPC 405/440 port is orphan from 2013 by commit cdeb89943bfc ("MAINTAINERS: Fix incorrect status tag") and commit 19624236cce1 ("MAINTAINERS: Update Grant's email address and maintainership") that's why it is time to remove the support fot these platforms. Signed-off-by: Michal Simek Acked-by: Arnd Bergmann --- Changes in v2: - Based on my chat with Arnd I removed arch/powerpc/xmon/ changes done in v1 to keep them the same as before. (kbuild reported some issues with it too) Documentation/devicetree/bindings/xilinx.txt | 143 ------ Documentation/powerpc/bootwrapper.rst | 28 +- MAINTAINERS | 6 - arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/boot/Makefile | 7 +- arch/powerpc/boot/dts/Makefile | 1 - arch/powerpc/boot/dts/virtex440-ml507.dts | 406 ---------------- arch/powerpc/boot/dts/virtex440-ml510.dts | 466 ------------------- arch/powerpc/boot/ops.h | 1 - arch/powerpc/boot/serial.c | 5 - arch/powerpc/boot/uartlite.c | 79 ---- arch/powerpc/boot/virtex.c | 97 ---- arch/powerpc/boot/virtex405-head.S | 31 -- arch/powerpc/boot/wrapper | 8 - arch/powerpc/configs/40x/virtex_defconfig | 75 --- arch/powerpc/configs/44x/virtex5_defconfig | 74 --- arch/powerpc/configs/ppc40x_defconfig | 8 - arch/powerpc/configs/ppc44x_defconfig | 8 - arch/powerpc/include/asm/xilinx_intc.h | 16 - arch/powerpc/include/asm/xilinx_pci.h | 21 - arch/powerpc/kernel/cputable.c | 39 -- arch/powerpc/platforms/40x/Kconfig | 31 -- arch/powerpc/platforms/40x/Makefile | 1 - arch/powerpc/platforms/40x/virtex.c | 54 --- arch/powerpc/platforms/44x/Kconfig | 37 -- arch/powerpc/platforms/44x/Makefile | 2 - arch/powerpc/platforms/44x/virtex.c | 60 --- arch/powerpc/platforms/44x/virtex_ml510.c | 30 -- arch/powerpc/platforms/Kconfig | 4 - arch/powerpc/sysdev/Makefile | 2 - arch/powerpc/sysdev/xilinx_intc.c | 88 ---- arch/powerpc/sysdev/xilinx_pci.c | 132 ------ drivers/char/Kconfig | 2 +- drivers/video/fbdev/Kconfig | 2 +- 34 files changed, 7 insertions(+), 1959 deletions(-) delete mode 100644 arch/powerpc/boot/dts/virtex440-ml507.dts delete mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts delete mode 100644 arch/powerpc/boot/uartlite.c delete mode 100644 arch/powerpc/boot/virtex.c delete mode 100644 arch/powerpc/boot/virtex405-head.S delete mode 100644 arch/powerpc/configs/40x/virtex_defconfig delete mode 100644 arch/powerpc/configs/44x/virtex5_defconfig delete mode 100644 arch/powerpc/include/asm/xilinx_intc.h delete mode 100644 arch/powerpc/include/asm/xilinx_pci.h delete mode 100644 arch/powerpc/platforms/40x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex_ml510.c delete mode 100644 arch/powerpc/sysdev/xilinx_intc.c delete mode 100644 arch/powerpc/sysdev/xilinx_pci.c diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt index d058ace29345..28199b31fe5e 100644 --- a/Documentation/devicetree/bindings/xilinx.txt +++ b/Documentation/devicetree/bindings/xilinx.txt @@ -86,149 +86,6 @@ xlnx,use-parity = <0>; }; - Some IP cores actually implement 2 or more logical devices. In - this case, the device should still describe the whole IP core with - a single node and add a child node for each logical device. The - ranges property can be used to translate from parent IP-core to the - registers of each device. In addition, the parent node should be - compatible with the bus type 'xlnx,compound', and should contain - #address-cells and #size-cells, as with any other bus. (Note: this - makes the assumption that both logical devices have the same bus - binding. If this is not true, then separate nodes should be used - for each logical device). The 'cell-index' property can be used to - enumerate logical devices within an IP core. For example, the - following is the system.mhs entry for the dual ps2 controller found - on the ml403 reference design. - - BEGIN opb_ps2_dual_ref - PARAMETER INSTANCE = opb_ps2_dual_ref_0 - PARAMETER HW_VER = 1.00.a - PARAMETER C_BASEADDR = 0xA9000000 - PARAMETER C_HIGHADDR = 0xA9001FFF - BUS_INTERFACE SOPB = opb_v20_0 - PORT Sys_Intr1 = ps2_1_intr - PORT Sys_Intr2 = ps2_2_intr - PORT Clkin1 = ps2_clk_rx_1 - PORT Clkin2 = ps2_clk_rx_2 - PORT Clkpd1 = ps2_clk_tx_1 - PORT Clkpd2 = ps2_clk_tx_2 - PORT Rx1 = ps2_d_rx_1 - PORT Rx2 = ps2_d_rx_2 - PORT Txpd1 = ps2_d_tx_1 - PORT Txpd2 = ps2_d_tx_2 - END - - It would result in the following device tree nodes: - - opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ranges = <0 a9000000 2000>; - // If this device had extra parameters, then they would - // go here. - ps2@0 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <0 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - ps2@1000 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <1000 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - }; - - Also, the system.mhs file defines bus attachments from the processor - to the devices. The device tree structure should reflect the bus - attachments. Again an example; this system.mhs fragment: - - BEGIN ppc405_virtex4 - PARAMETER INSTANCE = ppc405_0 - PARAMETER HW_VER = 1.01.a - BUS_INTERFACE DPLB = plb_v34_0 - BUS_INTERFACE IPLB = plb_v34_0 - END - - BEGIN opb_intc - PARAMETER INSTANCE = opb_intc_0 - PARAMETER HW_VER = 1.00.c - PARAMETER C_BASEADDR = 0xD1000FC0 - PARAMETER C_HIGHADDR = 0xD1000FDF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN opb_uart16550 - PARAMETER INSTANCE = opb_uart16550_0 - PARAMETER HW_VER = 1.00.d - PARAMETER C_BASEADDR = 0xa0000000 - PARAMETER C_HIGHADDR = 0xa0001FFF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN plb_v34 - PARAMETER INSTANCE = plb_v34_0 - PARAMETER HW_VER = 1.02.a - END - - BEGIN plb_bram_if_cntlr - PARAMETER INSTANCE = plb_bram_if_cntlr_0 - PARAMETER HW_VER = 1.00.b - PARAMETER C_BASEADDR = 0xFFFF0000 - PARAMETER C_HIGHADDR = 0xFFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - END - - BEGIN plb2opb_bridge - PARAMETER INSTANCE = plb2opb_bridge_0 - PARAMETER HW_VER = 1.01.a - PARAMETER C_RNG0_BASEADDR = 0x20000000 - PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF - PARAMETER C_RNG1_BASEADDR = 0x60000000 - PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF - PARAMETER C_RNG2_BASEADDR = 0x80000000 - PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF - PARAMETER C_RNG3_BASEADDR = 0xC0000000 - PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - BUS_INTERFACE MOPB = opb_v20_0 - END - - Gives this device tree (some properties removed for clarity): - - plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v34-1.02.a"; - device_type = "ibm,plb"; - ranges; // 1:1 translation - - plb_bram_if_cntrl_0: bram@ffff0000 { - reg = ; - } - - opb@20000000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <20000000 20000000 20000000 - 60000000 60000000 20000000 - 80000000 80000000 40000000 - c0000000 c0000000 20000000>; - - opb_uart16550_0: serial@a0000000 { - reg = ; - }; - - opb_intc_0: interrupt-controller@d1000fc0 { - reg = ; - }; - }; - }; - That covers the general approach to binding xilinx IP cores into the device tree. The following are bindings for specific devices: diff --git a/Documentation/powerpc/bootwrapper.rst b/Documentation/powerpc/bootwrapper.rst index a6292afba573..cdfa2bc8425f 100644 --- a/Documentation/powerpc/bootwrapper.rst +++ b/Documentation/powerpc/bootwrapper.rst @@ -70,28 +70,6 @@ Currently, the following image format targets exist: kernel with this image type and it depends entirely on the embedded device tree for all information. - The simpleImage is useful for booting systems with - an unknown firmware interface or for booting from - a debugger when no firmware is present (such as on - the Xilinx Virtex platform). The only assumption that - simpleImage makes is that RAM is correctly initialized - and that the MMU is either off or has RAM mapped to - base address 0. - - simpleImage also supports inserting special platform - specific initialization code to the start of the bootup - sequence. The virtex405 platform uses this feature to - ensure that the cache is invalidated before caching - is enabled. Platform specific initialization code is - added as part of the wrapper script and is keyed on - the image target name. For example, all - simpleImage.virtex405-* targets will add the - virtex405-head.S initialization code (This also means - that the dts file for virtex405 targets should be - named (virtex405-.dts). Search the wrapper - script for 'virtex405' and see the file - arch/powerpc/boot/virtex405-head.S for details. - treeImage.%; Image format for used with OpenBIOS firmware found on some ppc4xx hardware. This image embeds a device tree blob inside the image. @@ -116,10 +94,8 @@ Image types which embed a device tree blob (simpleImage, dtbImage, treeImage, and cuImage) all generate the device tree blob from a file in the arch/powerpc/boot/dts/ directory. The Makefile selects the correct device tree source based on the name of the target. Therefore, if the kernel is -built with 'make treeImage.walnut simpleImage.virtex405-ml403', then the -build system will use arch/powerpc/boot/dts/walnut.dts to build -treeImage.walnut and arch/powerpc/boot/dts/virtex405-ml403.dts to build -the simpleImage.virtex405-ml403. +built with 'make treeImage.walnut', then the build system will use +arch/powerpc/boot/dts/walnut.dts to build treeImage.walnut. Two special targets called 'zImage' and 'zImage.initrd' also exist. These targets build all the default images as selected by the kernel configuration. diff --git a/MAINTAINERS b/MAINTAINERS index a0d86490c2c6..842a9bbc2013 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9668,12 +9668,6 @@ L: linuxppc-dev@lists.ozlabs.org S: Maintained F: arch/powerpc/platforms/8xx/ -LINUX FOR POWERPC EMBEDDED XILINX VIRTEX -L: linuxppc-dev@lists.ozlabs.org -S: Orphan -F: arch/powerpc/*/*virtex* -F: arch/powerpc/*/*/*virtex* - LINUX FOR POWERPC PA SEMI PWRFICIENT L: linuxppc-dev@lists.ozlabs.org S: Orphan diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 0b063830eea8..b88900f4832f 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -230,7 +230,7 @@ config PPC_EARLY_DEBUG_40x help Select this to enable early debugging for IBM 40x chips via the inbuilt serial port. This works on chips with a 16550 compatible - UART. Xilinx chips with uartlite cannot use this option. + UART. config PPC_EARLY_DEBUG_CPM bool "Early serial debugging for Freescale CPM-based serial ports" diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index c53a1b8bba8b..d8077b7071dd 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -79,7 +79,6 @@ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 -$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 # The pre-boot decompressors pull in a lot of kernel headers and other source # files. This creates a bit of a dependency headache since we need to copy @@ -129,14 +128,12 @@ src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c -src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c src-wlib-$(CONFIG_CPM) += cpm-serial.c src-plat-y := of.c epapr.c src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ treeboot-walnut.c cuboot-acadia.c \ - cuboot-kilauea.c simpleboot.c \ - virtex405-head.S virtex.c + cuboot-kilauea.c simpleboot.c src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-bamboo.c cuboot-sam440ep.c \ cuboot-sequoia.c cuboot-rainier.c \ @@ -144,7 +141,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-warp.c cuboot-yosemite.c \ treeboot-iss4xx.c treeboot-currituck.c \ treeboot-akebono.c \ - simpleboot.c fixed-head.S virtex.c + simpleboot.c fixed-head.S src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile index 1cbc0e4ce857..fb335d05aae8 100644 --- a/arch/powerpc/boot/dts/Makefile +++ b/arch/powerpc/boot/dts/Makefile @@ -4,4 +4,3 @@ subdir-y += fsl dtstree := $(srctree)/$(src) dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) -dtb-$(CONFIG_XILINX_VIRTEX440_GENERIC_BOARD) += virtex440-ml507.dtb virtex440-ml510.dtb diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts deleted file mode 100644 index 66f1c6312de6..000000000000 --- a/arch/powerpc/boot/dts/virtex440-ml507.dts +++ /dev/null @@ -1,406 +0,0 @@ -/* - * This file supports the Xilinx ML507 board with the 440 processor. - * A reference design for the FPGA is provided at http://git.xilinx.com. - * - * (C) Copyright 2008 Xilinx, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - * --- - * - * Device Tree Generator version: 1.1 - * - * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 - * - * XPS project directory: ml507_ppc440_emb_ref - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,virtex440"; - dcr-parent = <&ppc440_0>; - model = "testing"; - DDR2_SDRAM: memory@0 { - device_type = "memory"; - reg = < 0 0x10000000 >; - } ; - chosen { - bootargs = "console=ttyS0 root=/dev/ram"; - stdout-path = &RS232_Uart_1; - } ; - cpus { - #address-cells = <1>; - #cpus = <1>; - #size-cells = <0>; - ppc440_0: cpu@0 { - clock-frequency = <400000000>; - compatible = "PowerPC,440", "ibm,ppc440"; - d-cache-line-size = <0x20>; - d-cache-size = <0x8000>; - dcr-access-method = "native"; - dcr-controller ; - device_type = "cpu"; - i-cache-line-size = <0x20>; - i-cache-size = <0x8000>; - model = "PowerPC,440"; - reg = <0>; - timebase-frequency = <400000000>; - xlnx,apu-control = <1>; - xlnx,apu-udi-0 = <0>; - xlnx,apu-udi-1 = <0>; - xlnx,apu-udi-10 = <0>; - xlnx,apu-udi-11 = <0>; - xlnx,apu-udi-12 = <0>; - xlnx,apu-udi-13 = <0>; - xlnx,apu-udi-14 = <0>; - xlnx,apu-udi-15 = <0>; - xlnx,apu-udi-2 = <0>; - xlnx,apu-udi-3 = <0>; - xlnx,apu-udi-4 = <0>; - xlnx,apu-udi-5 = <0>; - xlnx,apu-udi-6 = <0>; - xlnx,apu-udi-7 = <0>; - xlnx,apu-udi-8 = <0>; - xlnx,apu-udi-9 = <0>; - xlnx,dcr-autolock-enable = <1>; - xlnx,dcu-rd-ld-cache-plb-prio = <0>; - xlnx,dcu-rd-noncache-plb-prio = <0>; - xlnx,dcu-rd-touch-plb-prio = <0>; - xlnx,dcu-rd-urgent-plb-prio = <0>; - xlnx,dcu-wr-flush-plb-prio = <0>; - xlnx,dcu-wr-store-plb-prio = <0>; - xlnx,dcu-wr-urgent-plb-prio = <0>; - xlnx,dma0-control = <0>; - xlnx,dma0-plb-prio = <0>; - xlnx,dma0-rxchannelctrl = <0x1010000>; - xlnx,dma0-rxirqtimer = <0x3ff>; - xlnx,dma0-txchannelctrl = <0x1010000>; - xlnx,dma0-txirqtimer = <0x3ff>; - xlnx,dma1-control = <0>; - xlnx,dma1-plb-prio = <0>; - xlnx,dma1-rxchannelctrl = <0x1010000>; - xlnx,dma1-rxirqtimer = <0x3ff>; - xlnx,dma1-txchannelctrl = <0x1010000>; - xlnx,dma1-txirqtimer = <0x3ff>; - xlnx,dma2-control = <0>; - xlnx,dma2-plb-prio = <0>; - xlnx,dma2-rxchannelctrl = <0x1010000>; - xlnx,dma2-rxirqtimer = <0x3ff>; - xlnx,dma2-txchannelctrl = <0x1010000>; - xlnx,dma2-txirqtimer = <0x3ff>; - xlnx,dma3-control = <0>; - xlnx,dma3-plb-prio = <0>; - xlnx,dma3-rxchannelctrl = <0x1010000>; - xlnx,dma3-rxirqtimer = <0x3ff>; - xlnx,dma3-txchannelctrl = <0x1010000>; - xlnx,dma3-txirqtimer = <0x3ff>; - xlnx,endian-reset = <0>; - xlnx,generate-plb-timespecs = <1>; - xlnx,icu-rd-fetch-plb-prio = <0>; - xlnx,icu-rd-spec-plb-prio = <0>; - xlnx,icu-rd-touch-plb-prio = <0>; - xlnx,interconnect-imask = <0xffffffff>; - xlnx,mplb-allow-lock-xfer = <1>; - xlnx,mplb-arb-mode = <0>; - xlnx,mplb-awidth = <0x20>; - xlnx,mplb-counter = <0x500>; - xlnx,mplb-dwidth = <0x80>; - xlnx,mplb-max-burst = <8>; - xlnx,mplb-native-dwidth = <0x80>; - xlnx,mplb-p2p = <0>; - xlnx,mplb-prio-dcur = <2>; - xlnx,mplb-prio-dcuw = <3>; - xlnx,mplb-prio-icu = <4>; - xlnx,mplb-prio-splb0 = <1>; - xlnx,mplb-prio-splb1 = <0>; - xlnx,mplb-read-pipe-enable = <1>; - xlnx,mplb-sync-tattribute = <0>; - xlnx,mplb-wdog-enable = <1>; - xlnx,mplb-write-pipe-enable = <1>; - xlnx,mplb-write-post-enable = <1>; - xlnx,num-dma = <1>; - xlnx,pir = <0xf>; - xlnx,ppc440mc-addr-base = <0>; - xlnx,ppc440mc-addr-high = <0xfffffff>; - xlnx,ppc440mc-arb-mode = <0>; - xlnx,ppc440mc-bank-conflict-mask = <0xc00000>; - xlnx,ppc440mc-control = <0xf810008f>; - xlnx,ppc440mc-max-burst = <8>; - xlnx,ppc440mc-prio-dcur = <2>; - xlnx,ppc440mc-prio-dcuw = <3>; - xlnx,ppc440mc-prio-icu = <4>; - xlnx,ppc440mc-prio-splb0 = <1>; - xlnx,ppc440mc-prio-splb1 = <0>; - xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>; - xlnx,ppcdm-asyncmode = <0>; - xlnx,ppcds-asyncmode = <0>; - xlnx,user-reset = <0>; - DMA0: sdma@80 { - compatible = "xlnx,ll-dma-1.00.a"; - dcr-reg = < 0x80 0x11 >; - interrupt-parent = <&xps_intc_0>; - interrupts = < 10 2 11 2 >; - } ; - } ; - } ; - plb_v46_0: plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; - ranges ; - DIP_Switches_8Bit: gpio@81460000 { - compatible = "xlnx,xps-gpio-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 7 2 >; - reg = < 0x81460000 0x10000 >; - xlnx,all-inputs = <1>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <8>; - xlnx,interrupt-present = <1>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - FLASH: flash@fc000000 { - bank-width = <2>; - compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; - reg = < 0xfc000000 0x2000000 >; - xlnx,family = "virtex5"; - xlnx,include-datawidth-matching-0 = <0x1>; - xlnx,include-datawidth-matching-1 = <0x0>; - xlnx,include-datawidth-matching-2 = <0x0>; - xlnx,include-datawidth-matching-3 = <0x0>; - xlnx,include-negedge-ioregs = <0x0>; - xlnx,include-plb-ipif = <0x1>; - xlnx,include-wrbuf = <0x1>; - xlnx,max-mem-width = <0x10>; - xlnx,mch-native-dwidth = <0x20>; - xlnx,mch-plb-clk-period-ps = <0x2710>; - xlnx,mch-splb-awidth = <0x20>; - xlnx,mch0-accessbuf-depth = <0x10>; - xlnx,mch0-protocol = <0x0>; - xlnx,mch0-rddatabuf-depth = <0x10>; - xlnx,mch1-accessbuf-depth = <0x10>; - xlnx,mch1-protocol = <0x0>; - xlnx,mch1-rddatabuf-depth = <0x10>; - xlnx,mch2-accessbuf-depth = <0x10>; - xlnx,mch2-protocol = <0x0>; - xlnx,mch2-rddatabuf-depth = <0x10>; - xlnx,mch3-accessbuf-depth = <0x10>; - xlnx,mch3-protocol = <0x0>; - xlnx,mch3-rddatabuf-depth = <0x10>; - xlnx,mem0-width = <0x10>; - xlnx,mem1-width = <0x20>; - xlnx,mem2-width = <0x20>; - xlnx,mem3-width = <0x20>; - xlnx,num-banks-mem = <0x1>; - xlnx,num-channels = <0x2>; - xlnx,priority-mode = <0x0>; - xlnx,synch-mem-0 = <0x0>; - xlnx,synch-mem-1 = <0x0>; - xlnx,synch-mem-2 = <0x0>; - xlnx,synch-mem-3 = <0x0>; - xlnx,synch-pipedelay-0 = <0x2>; - xlnx,synch-pipedelay-1 = <0x2>; - xlnx,synch-pipedelay-2 = <0x2>; - xlnx,synch-pipedelay-3 = <0x2>; - xlnx,tavdv-ps-mem-0 = <0x1adb0>; - xlnx,tavdv-ps-mem-1 = <0x3a98>; - xlnx,tavdv-ps-mem-2 = <0x3a98>; - xlnx,tavdv-ps-mem-3 = <0x3a98>; - xlnx,tcedv-ps-mem-0 = <0x1adb0>; - xlnx,tcedv-ps-mem-1 = <0x3a98>; - xlnx,tcedv-ps-mem-2 = <0x3a98>; - xlnx,tcedv-ps-mem-3 = <0x3a98>; - xlnx,thzce-ps-mem-0 = <0x88b8>; - xlnx,thzce-ps-mem-1 = <0x1b58>; - xlnx,thzce-ps-mem-2 = <0x1b58>; - xlnx,thzce-ps-mem-3 = <0x1b58>; - xlnx,thzoe-ps-mem-0 = <0x1b58>; - xlnx,thzoe-ps-mem-1 = <0x1b58>; - xlnx,thzoe-ps-mem-2 = <0x1b58>; - xlnx,thzoe-ps-mem-3 = <0x1b58>; - xlnx,tlzwe-ps-mem-0 = <0x88b8>; - xlnx,tlzwe-ps-mem-1 = <0x0>; - xlnx,tlzwe-ps-mem-2 = <0x0>; - xlnx,tlzwe-ps-mem-3 = <0x0>; - xlnx,twc-ps-mem-0 = <0x2af8>; - xlnx,twc-ps-mem-1 = <0x3a98>; - xlnx,twc-ps-mem-2 = <0x3a98>; - xlnx,twc-ps-mem-3 = <0x3a98>; - xlnx,twp-ps-mem-0 = <0x11170>; - xlnx,twp-ps-mem-1 = <0x2ee0>; - xlnx,twp-ps-mem-2 = <0x2ee0>; - xlnx,twp-ps-mem-3 = <0x2ee0>; - xlnx,xcl0-linesize = <0x4>; - xlnx,xcl0-writexfer = <0x1>; - xlnx,xcl1-linesize = <0x4>; - xlnx,xcl1-writexfer = <0x1>; - xlnx,xcl2-linesize = <0x4>; - xlnx,xcl2-writexfer = <0x1>; - xlnx,xcl3-linesize = <0x4>; - xlnx,xcl3-writexfer = <0x1>; - } ; - Hard_Ethernet_MAC: xps-ll-temac@81c00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ethernet@81c00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,xps-ll-temac-1.01.b"; - device_type = "network"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 5 2 >; - llink-connected = <&DMA0>; - local-mac-address = [ 02 00 00 00 00 00 ]; - reg = < 0x81c00000 0x40 >; - xlnx,bus2core-clk-ratio = <1>; - xlnx,phy-type = <1>; - xlnx,phyaddr = <1>; - xlnx,rxcsum = <1>; - xlnx,rxfifo = <0x1000>; - xlnx,temac-type = <0>; - xlnx,txcsum = <1>; - xlnx,txfifo = <0x1000>; - phy-handle = <&phy7>; - clock-frequency = <100000000>; - phy7: phy@7 { - compatible = "marvell,88e1111"; - reg = <7>; - } ; - } ; - } ; - IIC_EEPROM: i2c@81600000 { - compatible = "xlnx,xps-iic-2.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 6 2 >; - reg = < 0x81600000 0x10000 >; - xlnx,clk-freq = <0x5f5e100>; - xlnx,family = "virtex5"; - xlnx,gpo-width = <0x1>; - xlnx,iic-freq = <0x186a0>; - xlnx,scl-inertial-delay = <0x0>; - xlnx,sda-inertial-delay = <0x0>; - xlnx,ten-bit-adr = <0x0>; - } ; - LEDs_8Bit: gpio@81400000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81400000 0x10000 >; - xlnx,all-inputs = <0>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <8>; - xlnx,interrupt-present = <0>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - LEDs_Positions: gpio@81420000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81420000 0x10000 >; - xlnx,all-inputs = <0>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <5>; - xlnx,interrupt-present = <0>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - Push_Buttons_5Bit: gpio@81440000 { - compatible = "xlnx,xps-gpio-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 8 2 >; - reg = < 0x81440000 0x10000 >; - xlnx,all-inputs = <1>; - xlnx,all-inputs-2 = <0>; - xlnx,dout-default = <0>; - xlnx,dout-default-2 = <0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <5>; - xlnx,interrupt-present = <1>; - xlnx,is-bidir = <1>; - xlnx,is-bidir-2 = <1>; - xlnx,is-dual = <0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - RS232_Uart_1: serial@83e00000 { - clock-frequency = <100000000>; - compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; - current-speed = <9600>; - device_type = "serial"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 9 2 >; - reg = < 0x83e00000 0x10000 >; - reg-offset = <0x1003>; - reg-shift = <2>; - xlnx,family = "virtex5"; - xlnx,has-external-rclk = <0>; - xlnx,has-external-xin = <0>; - xlnx,is-a-16550 = <1>; - } ; - SysACE_CompactFlash: sysace@83600000 { - compatible = "xlnx,xps-sysace-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 4 2 >; - reg = < 0x83600000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,mem-width = <0x10>; - } ; - xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { - compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; - reg = < 0xffff0000 0x10000 >; - xlnx,family = "virtex5"; - } ; - xps_intc_0: interrupt-controller@81800000 { - #interrupt-cells = <2>; - compatible = "xlnx,xps-intc-1.00.a"; - interrupt-controller ; - reg = < 0x81800000 0x10000 >; - xlnx,num-intr-inputs = <0xc>; - } ; - xps_timebase_wdt_1: xps-timebase-wdt@83a00000 { - compatible = "xlnx,xps-timebase-wdt-1.00.b"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 2 0 1 2 >; - reg = < 0x83a00000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,wdt-enable-once = <0>; - xlnx,wdt-interval = <0x1e>; - } ; - xps_timer_1: timer@83c00000 { - compatible = "xlnx,xps-timer-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 3 2 >; - reg = < 0x83c00000 0x10000 >; - xlnx,count-width = <0x20>; - xlnx,family = "virtex5"; - xlnx,gen0-assert = <1>; - xlnx,gen1-assert = <1>; - xlnx,one-timer-only = <1>; - xlnx,trig0-assert = <1>; - xlnx,trig1-assert = <1>; - } ; - } ; -} ; diff --git a/arch/powerpc/boot/dts/virtex440-ml510.dts b/arch/powerpc/boot/dts/virtex440-ml510.dts deleted file mode 100644 index 3b736ca26ddc..000000000000 --- a/arch/powerpc/boot/dts/virtex440-ml510.dts +++ /dev/null @@ -1,466 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Xilinx ML510 Reference Design support - * - * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design. - * The reference design contains a bug which prevent PCI DMA from working - * properly. A description of the bug is given in the plbv46_pci section. It - * needs to be fixed by the user until Xilinx updates their reference design. - * - * Copyright 2009, Roderick Colenbrander - */ - -/dts-v1/; -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,ml510-ref-design", "xlnx,virtex440"; - dcr-parent = <&ppc440_0>; - DDR2_SDRAM_DIMM0: memory@0 { - device_type = "memory"; - reg = < 0x0 0x20000000 >; - } ; - alias { - ethernet0 = &Hard_Ethernet_MAC; - serial0 = &RS232_Uart_1; - } ; - chosen { - bootargs = "console=ttyS0 root=/dev/ram"; - stdout-path = "/plb@0/serial@83e00000"; - } ; - cpus { - #address-cells = <1>; - #cpus = <0x1>; - #size-cells = <0>; - ppc440_0: cpu@0 { - #address-cells = <1>; - #size-cells = <1>; - clock-frequency = <300000000>; - compatible = "PowerPC,440", "ibm,ppc440"; - d-cache-line-size = <0x20>; - d-cache-size = <0x8000>; - dcr-access-method = "native"; - dcr-controller ; - device_type = "cpu"; - i-cache-line-size = <0x20>; - i-cache-size = <0x8000>; - model = "PowerPC,440"; - reg = <0>; - timebase-frequency = <300000000>; - xlnx,apu-control = <0x2000>; - xlnx,apu-udi-0 = <0x0>; - xlnx,apu-udi-1 = <0x0>; - xlnx,apu-udi-10 = <0x0>; - xlnx,apu-udi-11 = <0x0>; - xlnx,apu-udi-12 = <0x0>; - xlnx,apu-udi-13 = <0x0>; - xlnx,apu-udi-14 = <0x0>; - xlnx,apu-udi-15 = <0x0>; - xlnx,apu-udi-2 = <0x0>; - xlnx,apu-udi-3 = <0x0>; - xlnx,apu-udi-4 = <0x0>; - xlnx,apu-udi-5 = <0x0>; - xlnx,apu-udi-6 = <0x0>; - xlnx,apu-udi-7 = <0x0>; - xlnx,apu-udi-8 = <0x0>; - xlnx,apu-udi-9 = <0x0>; - xlnx,dcr-autolock-enable = <0x1>; - xlnx,dcu-rd-ld-cache-plb-prio = <0x0>; - xlnx,dcu-rd-noncache-plb-prio = <0x0>; - xlnx,dcu-rd-touch-plb-prio = <0x0>; - xlnx,dcu-rd-urgent-plb-prio = <0x0>; - xlnx,dcu-wr-flush-plb-prio = <0x0>; - xlnx,dcu-wr-store-plb-prio = <0x0>; - xlnx,dcu-wr-urgent-plb-prio = <0x0>; - xlnx,dma0-control = <0x0>; - xlnx,dma0-plb-prio = <0x0>; - xlnx,dma0-rxchannelctrl = <0x1010000>; - xlnx,dma0-rxirqtimer = <0x3ff>; - xlnx,dma0-txchannelctrl = <0x1010000>; - xlnx,dma0-txirqtimer = <0x3ff>; - xlnx,dma1-control = <0x0>; - xlnx,dma1-plb-prio = <0x0>; - xlnx,dma1-rxchannelctrl = <0x1010000>; - xlnx,dma1-rxirqtimer = <0x3ff>; - xlnx,dma1-txchannelctrl = <0x1010000>; - xlnx,dma1-txirqtimer = <0x3ff>; - xlnx,dma2-control = <0x0>; - xlnx,dma2-plb-prio = <0x0>; - xlnx,dma2-rxchannelctrl = <0x1010000>; - xlnx,dma2-rxirqtimer = <0x3ff>; - xlnx,dma2-txchannelctrl = <0x1010000>; - xlnx,dma2-txirqtimer = <0x3ff>; - xlnx,dma3-control = <0x0>; - xlnx,dma3-plb-prio = <0x0>; - xlnx,dma3-rxchannelctrl = <0x1010000>; - xlnx,dma3-rxirqtimer = <0x3ff>; - xlnx,dma3-txchannelctrl = <0x1010000>; - xlnx,dma3-txirqtimer = <0x3ff>; - xlnx,endian-reset = <0x0>; - xlnx,generate-plb-timespecs = <0x1>; - xlnx,icu-rd-fetch-plb-prio = <0x0>; - xlnx,icu-rd-spec-plb-prio = <0x0>; - xlnx,icu-rd-touch-plb-prio = <0x0>; - xlnx,interconnect-imask = <0xffffffff>; - xlnx,mplb-allow-lock-xfer = <0x1>; - xlnx,mplb-arb-mode = <0x0>; - xlnx,mplb-awidth = <0x20>; - xlnx,mplb-counter = <0x500>; - xlnx,mplb-dwidth = <0x80>; - xlnx,mplb-max-burst = <0x8>; - xlnx,mplb-native-dwidth = <0x80>; - xlnx,mplb-p2p = <0x0>; - xlnx,mplb-prio-dcur = <0x2>; - xlnx,mplb-prio-dcuw = <0x3>; - xlnx,mplb-prio-icu = <0x4>; - xlnx,mplb-prio-splb0 = <0x1>; - xlnx,mplb-prio-splb1 = <0x0>; - xlnx,mplb-read-pipe-enable = <0x1>; - xlnx,mplb-sync-tattribute = <0x0>; - xlnx,mplb-wdog-enable = <0x1>; - xlnx,mplb-write-pipe-enable = <0x1>; - xlnx,mplb-write-post-enable = <0x1>; - xlnx,num-dma = <0x0>; - xlnx,pir = <0xf>; - xlnx,ppc440mc-addr-base = <0x0>; - xlnx,ppc440mc-addr-high = <0x1fffffff>; - xlnx,ppc440mc-arb-mode = <0x0>; - xlnx,ppc440mc-bank-conflict-mask = <0x1800000>; - xlnx,ppc440mc-control = <0xf810008f>; - xlnx,ppc440mc-max-burst = <0x8>; - xlnx,ppc440mc-prio-dcur = <0x2>; - xlnx,ppc440mc-prio-dcuw = <0x3>; - xlnx,ppc440mc-prio-icu = <0x4>; - xlnx,ppc440mc-prio-splb0 = <0x1>; - xlnx,ppc440mc-prio-splb1 = <0x0>; - xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>; - xlnx,ppcdm-asyncmode = <0x0>; - xlnx,ppcds-asyncmode = <0x0>; - xlnx,user-reset = <0x0>; - } ; - } ; - plb_v46_0: plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; - ranges ; - FLASH: flash@fc000000 { - bank-width = <2>; - compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; - reg = < 0xfc000000 0x2000000 >; - xlnx,family = "virtex5"; - xlnx,include-datawidth-matching-0 = <0x1>; - xlnx,include-datawidth-matching-1 = <0x0>; - xlnx,include-datawidth-matching-2 = <0x0>; - xlnx,include-datawidth-matching-3 = <0x0>; - xlnx,include-negedge-ioregs = <0x0>; - xlnx,include-plb-ipif = <0x1>; - xlnx,include-wrbuf = <0x1>; - xlnx,max-mem-width = <0x10>; - xlnx,mch-native-dwidth = <0x20>; - xlnx,mch-plb-clk-period-ps = <0x2710>; - xlnx,mch-splb-awidth = <0x20>; - xlnx,mch0-accessbuf-depth = <0x10>; - xlnx,mch0-protocol = <0x0>; - xlnx,mch0-rddatabuf-depth = <0x10>; - xlnx,mch1-accessbuf-depth = <0x10>; - xlnx,mch1-protocol = <0x0>; - xlnx,mch1-rddatabuf-depth = <0x10>; - xlnx,mch2-accessbuf-depth = <0x10>; - xlnx,mch2-protocol = <0x0>; - xlnx,mch2-rddatabuf-depth = <0x10>; - xlnx,mch3-accessbuf-depth = <0x10>; - xlnx,mch3-protocol = <0x0>; - xlnx,mch3-rddatabuf-depth = <0x10>; - xlnx,mem0-width = <0x10>; - xlnx,mem1-width = <0x20>; - xlnx,mem2-width = <0x20>; - xlnx,mem3-width = <0x20>; - xlnx,num-banks-mem = <0x1>; - xlnx,num-channels = <0x2>; - xlnx,priority-mode = <0x0>; - xlnx,synch-mem-0 = <0x0>; - xlnx,synch-mem-1 = <0x0>; - xlnx,synch-mem-2 = <0x0>; - xlnx,synch-mem-3 = <0x0>; - xlnx,synch-pipedelay-0 = <0x2>; - xlnx,synch-pipedelay-1 = <0x2>; - xlnx,synch-pipedelay-2 = <0x2>; - xlnx,synch-pipedelay-3 = <0x2>; - xlnx,tavdv-ps-mem-0 = <0x1adb0>; - xlnx,tavdv-ps-mem-1 = <0x3a98>; - xlnx,tavdv-ps-mem-2 = <0x3a98>; - xlnx,tavdv-ps-mem-3 = <0x3a98>; - xlnx,tcedv-ps-mem-0 = <0x1adb0>; - xlnx,tcedv-ps-mem-1 = <0x3a98>; - xlnx,tcedv-ps-mem-2 = <0x3a98>; - xlnx,tcedv-ps-mem-3 = <0x3a98>; - xlnx,thzce-ps-mem-0 = <0x88b8>; - xlnx,thzce-ps-mem-1 = <0x1b58>; - xlnx,thzce-ps-mem-2 = <0x1b58>; - xlnx,thzce-ps-mem-3 = <0x1b58>; - xlnx,thzoe-ps-mem-0 = <0x1b58>; - xlnx,thzoe-ps-mem-1 = <0x1b58>; - xlnx,thzoe-ps-mem-2 = <0x1b58>; - xlnx,thzoe-ps-mem-3 = <0x1b58>; - xlnx,tlzwe-ps-mem-0 = <0x88b8>; - xlnx,tlzwe-ps-mem-1 = <0x0>; - xlnx,tlzwe-ps-mem-2 = <0x0>; - xlnx,tlzwe-ps-mem-3 = <0x0>; - xlnx,twc-ps-mem-0 = <0x1adb0>; - xlnx,twc-ps-mem-1 = <0x3a98>; - xlnx,twc-ps-mem-2 = <0x3a98>; - xlnx,twc-ps-mem-3 = <0x3a98>; - xlnx,twp-ps-mem-0 = <0x11170>; - xlnx,twp-ps-mem-1 = <0x2ee0>; - xlnx,twp-ps-mem-2 = <0x2ee0>; - xlnx,twp-ps-mem-3 = <0x2ee0>; - xlnx,xcl0-linesize = <0x4>; - xlnx,xcl0-writexfer = <0x1>; - xlnx,xcl1-linesize = <0x4>; - xlnx,xcl1-writexfer = <0x1>; - xlnx,xcl2-linesize = <0x4>; - xlnx,xcl2-writexfer = <0x1>; - xlnx,xcl3-linesize = <0x4>; - xlnx,xcl3-writexfer = <0x1>; - } ; - Hard_Ethernet_MAC: xps-ll-temac@81c00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ethernet@81c00000 { - compatible = "xlnx,xps-ll-temac-1.01.b"; - device_type = "network"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 8 2 >; - llink-connected = <&Hard_Ethernet_MAC_fifo>; - local-mac-address = [ 02 00 00 00 00 00 ]; - reg = < 0x81c00000 0x40 >; - xlnx,bus2core-clk-ratio = <0x1>; - xlnx,phy-type = <0x3>; - xlnx,phyaddr = <0x1>; - xlnx,rxcsum = <0x0>; - xlnx,rxfifo = <0x8000>; - xlnx,temac-type = <0x0>; - xlnx,txcsum = <0x0>; - xlnx,txfifo = <0x8000>; - } ; - } ; - Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 { - compatible = "xlnx,xps-ll-fifo-1.01.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 6 2 >; - reg = < 0x81a00000 0x10000 >; - xlnx,family = "virtex5"; - } ; - IIC_EEPROM: i2c@81600000 { - compatible = "xlnx,xps-iic-2.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 9 2 >; - reg = < 0x81600000 0x10000 >; - xlnx,clk-freq = <0x5f5e100>; - xlnx,family = "virtex5"; - xlnx,gpo-width = <0x1>; - xlnx,iic-freq = <0x186a0>; - xlnx,scl-inertial-delay = <0x5>; - xlnx,sda-inertial-delay = <0x5>; - xlnx,ten-bit-adr = <0x0>; - } ; - LCD_OPTIONAL: gpio@81420000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81420000 0x10000 >; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,dout-default = <0x0>; - xlnx,dout-default-2 = <0x0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <0xb>; - xlnx,interrupt-present = <0x0>; - xlnx,is-bidir = <0x1>; - xlnx,is-bidir-2 = <0x1>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - LEDs_4Bit: gpio@81400000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = < 0x81400000 0x10000 >; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,dout-default = <0x0>; - xlnx,dout-default-2 = <0x0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <0x4>; - xlnx,interrupt-present = <0x0>; - xlnx,is-bidir = <0x1>; - xlnx,is-bidir-2 = <0x1>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - } ; - RS232_Uart_1: serial@83e00000 { - clock-frequency = <100000000>; - compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; - current-speed = <9600>; - device_type = "serial"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 11 2 >; - reg = < 0x83e00000 0x10000 >; - reg-offset = <0x1003>; - reg-shift = <2>; - xlnx,family = "virtex5"; - xlnx,has-external-rclk = <0x0>; - xlnx,has-external-xin = <0x0>; - xlnx,is-a-16550 = <0x1>; - } ; - SPI_EEPROM: xps-spi@feff8000 { - compatible = "xlnx,xps-spi-2.00.b"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 10 2 >; - reg = < 0xfeff8000 0x80 >; - xlnx,family = "virtex5"; - xlnx,fifo-exist = <0x1>; - xlnx,num-ss-bits = <0x1>; - xlnx,num-transfer-bits = <0x8>; - xlnx,sck-ratio = <0x80>; - } ; - SysACE_CompactFlash: sysace@83600000 { - compatible = "xlnx,xps-sysace-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 7 2 >; - reg = < 0x83600000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,mem-width = <0x10>; - } ; - plbv46_pci_0: plbv46-pci@85e00000 { - #size-cells = <2>; - #address-cells = <3>; - compatible = "xlnx,plbv46-pci-1.03.a"; - device_type = "pci"; - reg = < 0x85e00000 0x10000 >; - - /* - * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to - * 0 which means that a read/write to the memory mapped - * i/o region (which starts at 0xa0000000) for pci - * bar 0 on the plb side translates to 0. - * It is important to set this value to 0xa0000000, so - * that inbound and outbound pci transactions work - * properly including DMA. - */ - ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 - 0x01000000 0 0x00000000 0xf0000000 0 0x00010000>; - - #interrupt-cells = <1>; - interrupt-parent = <&xps_intc_0>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IRQ mapping for pci slots and ALI M1533 - * periperhals. In total there are 5 interrupt - * lines connected to a xps_intc controller. - * Four of them are PCI IRQ A, B, C, D and - * which correspond to respectively xpx_intc - * 5, 4, 3 and 2. The fifth interrupt line is - * connected to the south bridge and this one - * uses irq 1 and is active high instead of - * active low. - * - * The M1533 contains various peripherals - * including AC97 audio, a modem, USB, IDE and - * some power management stuff. The modem - * isn't connected on the ML510 and the power - * management core also isn't used. - */ - - /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */ - 0x3000 0 0 1 &xps_intc_0 3 2 - 0x3000 0 0 2 &xps_intc_0 2 2 - 0x3000 0 0 3 &xps_intc_0 5 2 - 0x3000 0 0 4 &xps_intc_0 4 2 - - /* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */ - /* - 0x11800 0 0 1 &xps_intc_0 5 0 2 - 0x11800 0 0 2 &xps_intc_0 4 0 2 - 0x11800 0 0 3 &xps_intc_0 3 0 2 - 0x11800 0 0 4 &xps_intc_0 2 0 2 - */ - - /* According to the datasheet + schematic - * ABCD [FPGA] of slot 5 is mapped to DABC. - * Testing showed that at least A maps to B, - * the mapping of the other pins is a guess - * and for that reason the lines have been - * commented out. - */ - /* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */ - 0x2800 0 0 1 &xps_intc_0 4 2 - /* - 0x2800 0 0 2 &xps_intc_0 3 2 - 0x2800 0 0 3 &xps_intc_0 2 2 - 0x2800 0 0 4 &xps_intc_0 5 2 - */ - - /* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */ - /* - 0x11000 0 0 1 &xps_intc_0 4 0 2 - 0x11000 0 0 2 &xps_intc_0 3 0 2 - 0x11000 0 0 3 &xps_intc_0 2 0 2 - 0x11000 0 0 4 &xps_intc_0 5 0 2 - */ - - /* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */ - 0x0800 0 0 1 &i8259 7 2 - - /* IDSEL 0x1b / dev=11, bus=0 / IDE */ - 0x5800 0 0 1 &i8259 14 2 - - /* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */ - 0x7800 0 0 1 &i8259 7 2 - >; - ali_m1533 { - #size-cells = <1>; - #address-cells = <2>; - i8259: interrupt-controller@20 { - reg = <1 0x20 2 - 1 0xa0 2 - 1 0x4d0 2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - - /* south bridge irq is active high */ - interrupts = <1 3>; - interrupt-parent = <&xps_intc_0>; - }; - }; - } ; - xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { - compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; - reg = < 0xffff0000 0x10000 >; - xlnx,family = "virtex5"; - } ; - xps_intc_0: interrupt-controller@81800000 { - #interrupt-cells = <0x2>; - compatible = "xlnx,xps-intc-1.00.a"; - interrupt-controller ; - reg = < 0x81800000 0x10000 >; - xlnx,num-intr-inputs = <0xc>; - } ; - xps_tft_0: tft@86e00000 { - compatible = "xlnx,xps-tft-1.00.a"; - reg = < 0x86e00000 0x10000 >; - xlnx,dcr-splb-slave-if = <0x1>; - xlnx,default-tft-base-addr = <0x0>; - xlnx,family = "virtex5"; - xlnx,i2c-slave-addr = <0x76>; - xlnx,mplb-awidth = <0x20>; - xlnx,mplb-dwidth = <0x80>; - xlnx,mplb-native-dwidth = <0x40>; - xlnx,mplb-smallest-slave = <0x20>; - xlnx,tft-interface = <0x1>; - } ; - } ; -} ; diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index e0606766480f..6455fc9a244f 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -88,7 +88,6 @@ int serial_console_init(void); int ns16550_console_init(void *devp, struct serial_console_data *scdp); int cpm_console_init(void *devp, struct serial_console_data *scdp); int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp); -int uartlite_console_init(void *devp, struct serial_console_data *scdp); int opal_console_init(void *devp, struct serial_console_data *scdp); void *simple_alloc_init(char *base, unsigned long heap_size, unsigned long granularity, unsigned long max_allocs); diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index 9457863147f9..0bfa7e87e546 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -132,11 +132,6 @@ int serial_console_init(void) else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart")) rc = mpc5200_psc_console_init(devp, &serial_cd); #endif -#ifdef CONFIG_XILINX_VIRTEX - else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") || - dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a")) - rc = uartlite_console_init(devp, &serial_cd); -#endif #ifdef CONFIG_PPC64_BOOT_WRAPPER else if (dt_is_compatible(devp, "ibm,opal-console-raw")) rc = opal_console_init(devp, &serial_cd); diff --git a/arch/powerpc/boot/uartlite.c b/arch/powerpc/boot/uartlite.c deleted file mode 100644 index 46bed69b4169..000000000000 --- a/arch/powerpc/boot/uartlite.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Xilinx UARTLITE bootloader driver - * - * Copyright (C) 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include "types.h" -#include "string.h" -#include "stdio.h" -#include "io.h" -#include "ops.h" - -#define ULITE_RX 0x00 -#define ULITE_TX 0x04 -#define ULITE_STATUS 0x08 -#define ULITE_CONTROL 0x0c - -#define ULITE_STATUS_RXVALID 0x01 -#define ULITE_STATUS_TXFULL 0x08 - -#define ULITE_CONTROL_RST_RX 0x02 - -static void * reg_base; - -static int uartlite_open(void) -{ - /* Clear the RX FIFO */ - out_be32(reg_base + ULITE_CONTROL, ULITE_CONTROL_RST_RX); - return 0; -} - -static void uartlite_putc(unsigned char c) -{ - u32 reg = ULITE_STATUS_TXFULL; - while (reg & ULITE_STATUS_TXFULL) /* spin on TXFULL bit */ - reg = in_be32(reg_base + ULITE_STATUS); - out_be32(reg_base + ULITE_TX, c); -} - -static unsigned char uartlite_getc(void) -{ - u32 reg = 0; - while (!(reg & ULITE_STATUS_RXVALID)) /* spin waiting for RXVALID bit */ - reg = in_be32(reg_base + ULITE_STATUS); - return in_be32(reg_base + ULITE_RX); -} - -static u8 uartlite_tstc(void) -{ - u32 reg = in_be32(reg_base + ULITE_STATUS); - return reg & ULITE_STATUS_RXVALID; -} - -int uartlite_console_init(void *devp, struct serial_console_data *scdp) -{ - int n; - unsigned long reg_phys; - - n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); - if (n != sizeof(reg_base)) { - if (!dt_xlate_reg(devp, 0, ®_phys, NULL)) - return -1; - - reg_base = (void *)reg_phys; - } - - scdp->open = uartlite_open; - scdp->putc = uartlite_putc; - scdp->getc = uartlite_getc; - scdp->tstc = uartlite_tstc; - scdp->close = NULL; - return 0; -} diff --git a/arch/powerpc/boot/virtex.c b/arch/powerpc/boot/virtex.c deleted file mode 100644 index f731cbb4bff0..000000000000 --- a/arch/powerpc/boot/virtex.c +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * The platform specific code for virtex devices since a boot loader is not - * always used. - * - * (C) Copyright 2008 Xilinx, Inc. - */ - -#include "ops.h" -#include "io.h" -#include "stdio.h" - -#define UART_DLL 0 /* Out: Divisor Latch Low */ -#define UART_DLM 1 /* Out: Divisor Latch High */ -#define UART_FCR 2 /* Out: FIFO Control Register */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_LCR 3 /* Out: Line Control Register */ -#define UART_MCR 4 /* Out: Modem Control Register */ -#define UART_MCR_RTS 0x02 /* RTS complement */ -#define UART_MCR_DTR 0x01 /* DTR complement */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -static int virtex_ns16550_console_init(void *devp) -{ - unsigned char *reg_base; - u32 reg_shift, reg_offset, clk, spd; - u16 divisor; - int n; - - if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1) - return -1; - - n = getprop(devp, "reg-offset", ®_offset, sizeof(reg_offset)); - if (n == sizeof(reg_offset)) - reg_base += reg_offset; - - n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); - if (n != sizeof(reg_shift)) - reg_shift = 0; - - n = getprop(devp, "current-speed", (void *)&spd, sizeof(spd)); - if (n != sizeof(spd)) - spd = 9600; - - /* should there be a default clock rate?*/ - n = getprop(devp, "clock-frequency", (void *)&clk, sizeof(clk)); - if (n != sizeof(clk)) - return -1; - - divisor = clk / (16 * spd); - - /* Access baud rate */ - out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_DLAB); - - /* Baud rate based on input clock */ - out_8(reg_base + (UART_DLL << reg_shift), divisor & 0xFF); - out_8(reg_base + (UART_DLM << reg_shift), divisor >> 8); - - /* 8 data, 1 stop, no parity */ - out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_WLEN8); - - /* RTS/DTR */ - out_8(reg_base + (UART_MCR << reg_shift), UART_MCR_RTS | UART_MCR_DTR); - - /* Clear transmitter and receiver */ - out_8(reg_base + (UART_FCR << reg_shift), - UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); - return 0; -} - -/* For virtex, the kernel may be loaded without using a bootloader and if so - some UARTs need more setup than is provided in the normal console init -*/ -int platform_specific_init(void) -{ - void *devp; - char devtype[MAX_PROP_LEN]; - char path[MAX_PATH_LEN]; - - devp = finddevice("/chosen"); - if (devp == NULL) - return -1; - - if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) { - devp = finddevice(path); - if (devp == NULL) - return -1; - - if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0) - && !strcmp(devtype, "serial") - && (dt_is_compatible(devp, "ns16550"))) - virtex_ns16550_console_init(devp); - } - return 0; -} diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S deleted file mode 100644 index 00bab7d7c48c..000000000000 --- a/arch/powerpc/boot/virtex405-head.S +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include "ppc_asm.h" - - .text - .global _zimage_start -_zimage_start: - - /* PPC errata 213: needed by Virtex-4 FX */ - mfccr0 0 - oris 0,0,0x50000000@h - mtccr0 0 - - /* - * Invalidate the data cache if the data cache is turned off. - * - The 405 core does not invalidate the data cache on power-up - * or reset but does turn off the data cache. We cannot assume - * that the cache contents are valid. - * - If the data cache is turned on this must have been done by - * a bootloader and we assume that the cache contents are - * valid. - */ - mfdccr r9 - cmplwi r9,0 - bne 2f - lis r9,0 - li r8,256 - mtctr r8 -1: dccci r0,r9 - addi r9,r9,0x20 - bdnz 1b -2: b _zimage_start_lib diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index ed6266367bc0..de5fd5a047e8 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -323,14 +323,6 @@ adder875-redboot) platformo="$object/fixed-head.o $object/redboot-8xx.o" binary=y ;; -simpleboot-virtex405-*) - platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o" - binary=y - ;; -simpleboot-virtex440-*) - platformo="$object/fixed-head.o $object/simpleboot.o $object/virtex.o" - binary=y - ;; simpleboot-*) platformo="$object/fixed-head.o $object/simpleboot.o" binary=y diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig deleted file mode 100644 index 5e7c61d1d7d0..000000000000 --- a/arch/powerpc/configs/40x/virtex_defconfig +++ /dev/null @@ -1,75 +0,0 @@ -CONFIG_40x=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_WALNUT is not set -CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y -CONFIG_PREEMPT=y -CONFIG_MATH_EMULATION=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="" -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NETFILTER=y -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_MANGLE=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_XILINX_SYSACE=y -CONFIG_NETDEVICES=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_XILINX_XPS_PS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -CONFIG_XILINX_HWICAP=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_XILINX=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_XILINX=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_CRC_CCITT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_KERNEL=y diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig deleted file mode 100644 index 1f74079e1703..000000000000 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ /dev/null @@ -1,74 +0,0 @@ -CONFIG_44x=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_EBONY is not set -CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y -CONFIG_PREEMPT=y -CONFIG_MATH_EMULATION=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NETFILTER=y -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_MANGLE=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_XILINX_SYSACE=y -CONFIG_NETDEVICES=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_XILINX_XPS_PS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -CONFIG_XILINX_HWICAP=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_XILINX=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_XILINX=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_CRC_CCITT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_KERNEL=y diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index a5f683aed328..88960a72b525 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -14,7 +14,6 @@ CONFIG_EP405=y CONFIG_HOTFOOT=y CONFIG_KILAUEA=y CONFIG_MAKALU=y -CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -37,33 +36,26 @@ CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_XILINX_SYSACE=m CONFIG_NETDEVICES=y CONFIG_IBM_EMAC=y # CONFIG_INPUT is not set CONFIG_SERIO=m # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_XILINX_XPS_PS2=m # CONFIG_VT is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_XILINX_HWICAP=m CONFIG_I2C=m CONFIG_I2C_CHARDEV=m CONFIG_I2C_GPIO=m CONFIG_I2C_IBM_IIC=m -CONFIG_GPIO_XILINX=y # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_FB=m -CONFIG_FB_XILINX=m CONFIG_EXT2_FS=y CONFIG_EXT4_FS=m CONFIG_VFAT_FS=m diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index a41eedfe0a5f..8b595f67068c 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -22,7 +22,6 @@ CONFIG_GLACIER=y CONFIG_REDWOOD=y CONFIG_EIGER=y CONFIG_YOSEMITE=y -CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y CONFIG_PPC4xx_GPIO=y CONFIG_MATH_EMULATION=y CONFIG_NET=y @@ -46,7 +45,6 @@ CONFIG_MTD_UBI=m CONFIG_MTD_UBI_GLUEBI=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_XILINX_SYSACE=m CONFIG_SCSI=m CONFIG_BLK_DEV_SD=m # CONFIG_SCSI_LOWLEVEL is not set @@ -57,7 +55,6 @@ CONFIG_IBM_EMAC=y CONFIG_SERIO=m # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_XILINX_XPS_PS2=m # CONFIG_VT is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -65,18 +62,13 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_XILINX_HWICAP=m CONFIG_I2C=m CONFIG_I2C_CHARDEV=m CONFIG_I2C_GPIO=m CONFIG_I2C_IBM_IIC=m -CONFIG_GPIO_XILINX=y # CONFIG_HWMON is not set CONFIG_FB=m -CONFIG_FB_XILINX=m CONFIG_USB=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m diff --git a/arch/powerpc/include/asm/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h deleted file mode 100644 index ca9aa162fb09..000000000000 --- a/arch/powerpc/include/asm/xilinx_intc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Xilinx intc external definitions - * - * Copyright 2007 Secret Lab Technologies Ltd. - */ -#ifndef _ASM_POWERPC_XILINX_INTC_H -#define _ASM_POWERPC_XILINX_INTC_H - -#ifdef __KERNEL__ - -extern void __init xilinx_intc_init_tree(void); -extern unsigned int xintc_get_irq(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_XILINX_INTC_H */ diff --git a/arch/powerpc/include/asm/xilinx_pci.h b/arch/powerpc/include/asm/xilinx_pci.h deleted file mode 100644 index 7a8275caf6af..000000000000 --- a/arch/powerpc/include/asm/xilinx_pci.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Xilinx pci external definitions - * - * Copyright 2009 Roderick Colenbrander - * Copyright 2009 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef INCLUDE_XILINX_PCI -#define INCLUDE_XILINX_PCI - -#ifdef CONFIG_XILINX_PCI -extern void __init xilinx_pci_init(void); -#else -static inline void __init xilinx_pci_init(void) { return; } -#endif - -#endif /* INCLUDE_XILINX_PCI */ diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 245be4fafe13..2dff9041bcdc 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1385,32 +1385,6 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, - { /* Xilinx Virtex-II Pro */ - .pvr_mask = 0xfffff000, - .pvr_value = 0x20010000, - .cpu_name = "Virtex-II Pro", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* Xilinx Virtex-4 FX */ - .pvr_mask = 0xfffff000, - .pvr_value = 0x20011000, - .cpu_name = "Virtex-4 FX", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | - PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, { /* 405EP */ .pvr_mask = 0xffff0000, .pvr_value = 0x51210000, @@ -1800,19 +1774,6 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, - { /* 440 in Xilinx Virtex-5 FXT */ - .pvr_mask = 0xfffffff0, - .pvr_value = 0x7ff21910, - .cpu_name = "440 in Virtex-5 FXT", - .cpu_features = CPU_FTRS_44X, - .cpu_user_features = COMMON_USER_BOOKE, - .mmu_features = MMU_FTR_TYPE_44x, - .icache_bsize = 32, - .dcache_bsize = 32, - .cpu_setup = __setup_cpu_440x5, - .machine_check = machine_check_440A, - .platform = "ppc440", - }, { /* 460EX */ .pvr_mask = 0xffff0006, .pvr_value = 0x13020002, diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 6da813b65b42..d06ca51e8443 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -55,23 +55,6 @@ config WALNUT help This option enables support for the IBM PPC405GP evaluation board. -config XILINX_VIRTEX_GENERIC_BOARD - bool "Generic Xilinx Virtex board" - depends on 40x - select XILINX_VIRTEX_II_PRO - select XILINX_VIRTEX_4_FX - select XILINX_INTC - help - This option enables generic support for Xilinx Virtex based boards. - - The generic virtex board support matches any device tree which - specifies 'xilinx,virtex' in its compatible field. This includes - the Xilinx ML3xx and ML4xx reference designs using the powerpc - core. - - Most Virtex designs should use this unless it needs to do some - special configuration at board probe time. - config OBS600 bool "OpenBlockS 600" depends on 40x @@ -109,20 +92,6 @@ config 405EZ select IBM_EMAC_MAL_CLR_ICINTSTAT if IBM_EMAC select IBM_EMAC_MAL_COMMON_ERR if IBM_EMAC -config XILINX_VIRTEX - bool - select DEFAULT_UIMAGE - -config XILINX_VIRTEX_II_PRO - bool - select XILINX_VIRTEX - select IBM405_ERR77 - select IBM405_ERR51 - -config XILINX_VIRTEX_4_FX - bool - select XILINX_VIRTEX - config STB03xxx bool select IBM405_ERR77 diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile index 828d78340dd9..e9386deed505 100644 --- a/arch/powerpc/platforms/40x/Makefile +++ b/arch/powerpc/platforms/40x/Makefile @@ -1,5 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_WALNUT) += walnut.o -obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_PPC40x_SIMPLE) += ppc40x_simple.o diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c deleted file mode 100644 index e3d5e095846b..000000000000 --- a/arch/powerpc/platforms/40x/virtex.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Xilinx Virtex (IIpro & 4FX) based board support - * - * Copyright 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static const struct of_device_id xilinx_of_bus_ids[] __initconst = { - { .compatible = "xlnx,plb-v46-1.00.a", }, - { .compatible = "xlnx,plb-v34-1.01.a", }, - { .compatible = "xlnx,plb-v34-1.02.a", }, - { .compatible = "xlnx,opb-v20-1.10.c", }, - { .compatible = "xlnx,dcr-v29-1.00.a", }, - { .compatible = "xlnx,compound", }, - {} -}; - -static int __init virtex_device_probe(void) -{ - of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(virtex, virtex_device_probe); - -static int __init virtex_probe(void) -{ - if (!of_machine_is_compatible("xlnx,virtex")) - return 0; - - return 1; -} - -define_machine(virtex) { - .name = "Xilinx Virtex", - .probe = virtex_probe, - .setup_arch = xilinx_pci_init, - .init_IRQ = xilinx_intc_init_tree, - .get_irq = xintc_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 25ebe634a661..39e93d23fb38 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -232,33 +232,6 @@ config ICON help This option enables support for the AMCC PPC440SPe evaluation board. -config XILINX_VIRTEX440_GENERIC_BOARD - bool "Generic Xilinx Virtex 5 FXT board support" - depends on 44x - select XILINX_VIRTEX_5_FXT - select XILINX_INTC - help - This option enables generic support for Xilinx Virtex based boards - that use a 440 based processor in the Virtex 5 FXT FPGA architecture. - - The generic virtex board support matches any device tree which - specifies 'xlnx,virtex440' in its compatible field. This includes - the Xilinx ML5xx reference designs using the powerpc core. - - Most Virtex 5 designs should use this unless it needs to do some - special configuration at board probe time. - -config XILINX_ML510 - bool "Xilinx ML510 extra support" - depends on XILINX_VIRTEX440_GENERIC_BOARD - select HAVE_PCI - select XILINX_PCI if PCI - select PPC_INDIRECT_PCI if PCI - select PPC_I8259 if PCI - help - This option enables extra support for features on the Xilinx ML510 - board. The ML510 has a PCI bus with ALI south bridge. - config PPC44x_SIMPLE bool "Simple PowerPC 44x board support" depends on 44x @@ -354,13 +327,3 @@ config 476FPE_ERR46 config IBM440EP_ERR42 bool -# Xilinx specific config options. -config XILINX_VIRTEX - bool - select DEFAULT_UIMAGE - -# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above -config XILINX_VIRTEX_5_FXT - bool - select XILINX_VIRTEX - diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 1b78c6af821a..5ba031f57652 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -7,8 +7,6 @@ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o -obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o -obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o obj-$(CONFIG_ISS4xx) += iss4xx.o obj-$(CONFIG_CANYONLANDS)+= canyonlands.o obj-$(CONFIG_CURRITUCK) += ppc476.o diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c deleted file mode 100644 index 3eb13ed926ee..000000000000 --- a/arch/powerpc/platforms/44x/virtex.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Xilinx Virtex 5FXT based board support, derived from - * the Xilinx Virtex (IIpro & 4FX) based board support - * - * Copyright 2007 Secret Lab Technologies Ltd. - * Copyright 2008 Xilinx, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "44x.h" - -static const struct of_device_id xilinx_of_bus_ids[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "xlnx,plb-v46-1.00.a", }, - { .compatible = "xlnx,plb-v46-1.02.a", }, - { .compatible = "xlnx,plb-v34-1.01.a", }, - { .compatible = "xlnx,plb-v34-1.02.a", }, - { .compatible = "xlnx,opb-v20-1.10.c", }, - { .compatible = "xlnx,dcr-v29-1.00.a", }, - { .compatible = "xlnx,compound", }, - {} -}; - -static int __init virtex_device_probe(void) -{ - of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(virtex, virtex_device_probe); - -static int __init virtex_probe(void) -{ - if (!of_machine_is_compatible("xlnx,virtex440")) - return 0; - - return 1; -} - -define_machine(virtex) { - .name = "Xilinx Virtex440", - .probe = virtex_probe, - .setup_arch = xilinx_pci_init, - .init_IRQ = xilinx_intc_init_tree, - .get_irq = xintc_get_irq, - .calibrate_decr = generic_calibrate_decr, - .restart = ppc4xx_reset_system, -}; diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c deleted file mode 100644 index 349f218b335c..000000000000 --- a/arch/powerpc/platforms/44x/virtex_ml510.c +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include "44x.h" - -/** - * ml510_ail_quirk - */ -static void ml510_ali_quirk(struct pci_dev *dev) -{ - /* Enable the IDE controller */ - pci_write_config_byte(dev, 0x58, 0x4c); - /* Assign irq 14 to the primary ide channel */ - pci_write_config_byte(dev, 0x44, 0x0d); - /* Assign irq 15 to the secondary ide channel */ - pci_write_config_byte(dev, 0x75, 0x0f); - /* Set the ide controller in native mode */ - pci_write_config_byte(dev, 0x09, 0xff); - - /* INTB = disabled, INTA = disabled */ - pci_write_config_byte(dev, 0x48, 0x00); - /* INTD = disabled, INTC = disabled */ - pci_write_config_byte(dev, 0x4a, 0x00); - /* Audio = INT7, Modem = disabled. */ - pci_write_config_byte(dev, 0x4b, 0x60); - /* USB = INT7 */ - pci_write_config_byte(dev, 0x74, 0x06); -} -DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk); - diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 1f8025383caa..5e6479d409a0 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -317,8 +317,4 @@ config MCU_MPC8349EMITX also register MCU GPIOs with the generic GPIO API, so you'll able to use MCU pins as GPIOs. -config XILINX_PCI - bool "Xilinx PCI host bridge support" - depends on PCI && XILINX_VIRTEX - endmenu diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index cb5a5bd2cef5..026b3f01a991 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -31,8 +31,6 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_IPIC) += ipic.o -obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o -obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o obj-$(CONFIG_OF_RTC) += of_rtc.o obj-$(CONFIG_CPM) += cpm_common.o diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c deleted file mode 100644 index 4a86dcff3fcd..000000000000 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Interrupt controller driver for Xilinx Virtex FPGAs - * - * Copyright (C) 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -/* - * This is a driver for the interrupt controller typically found in - * Xilinx Virtex FPGA designs. - * - * The interrupt sense levels are hard coded into the FPGA design with - * typically a 1:1 relationship between irq lines and devices (no shared - * irq lines). Therefore, this driver does not attempt to handle edge - * and level interrupts differently. - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_PPC_I8259) -/* - * Support code for cascading to 8259 interrupt controllers - */ -static void xilinx_i8259_cascade(struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - unsigned int cascade_irq = i8259_irq(); - - if (cascade_irq) - generic_handle_irq(cascade_irq); - - /* Let xilinx_intc end the interrupt */ - chip->irq_unmask(&desc->irq_data); -} - -static void __init xilinx_i8259_setup_cascade(void) -{ - struct device_node *cascade_node; - int cascade_irq; - - /* Initialize i8259 controller */ - cascade_node = of_find_compatible_node(NULL, NULL, "chrp,iic"); - if (!cascade_node) - return; - - cascade_irq = irq_of_parse_and_map(cascade_node, 0); - if (!cascade_irq) { - pr_err("virtex_ml510: Failed to map cascade interrupt\n"); - goto out; - } - - i8259_init(cascade_node, 0); - irq_set_chained_handler(cascade_irq, xilinx_i8259_cascade); - - /* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */ - /* This looks like a dirty hack to me --gcl */ - outb(0xc0, 0x4d0); - outb(0xc0, 0x4d1); - - out: - of_node_put(cascade_node); -} -#else -static inline void xilinx_i8259_setup_cascade(void) { return; } -#endif /* defined(CONFIG_PPC_I8259) */ - -/* - * Initialize master Xilinx interrupt controller - */ -void __init xilinx_intc_init_tree(void) -{ - irqchip_init(); - xilinx_i8259_setup_cascade(); -} diff --git a/arch/powerpc/sysdev/xilinx_pci.c b/arch/powerpc/sysdev/xilinx_pci.c deleted file mode 100644 index fea5667699ed..000000000000 --- a/arch/powerpc/sysdev/xilinx_pci.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * PCI support for Xilinx plbv46_pci soft-core which can be used on - * Xilinx Virtex ML410 / ML510 boards. - * - * Copyright 2009 Roderick Colenbrander - * Copyright 2009 Secret Lab Technologies Ltd. - * - * The pci bridge fixup code was copied from ppc4xx_pci.c and was written - * by Benjamin Herrenschmidt. - * Copyright 2007 Ben. Herrenschmidt , IBM Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include - -#define XPLB_PCI_ADDR 0x10c -#define XPLB_PCI_DATA 0x110 -#define XPLB_PCI_BUS 0x114 - -#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY - -static const struct of_device_id xilinx_pci_match[] = { - { .compatible = "xlnx,plbv46-pci-1.03.a", }, - {} -}; - -/** - * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration. - */ -static void xilinx_pci_fixup_bridge(struct pci_dev *dev) -{ - struct pci_controller *hose; - int i; - - if (dev->devfn || dev->bus->self) - return; - - hose = pci_bus_to_host(dev->bus); - if (!hose) - return; - - if (!of_match_node(xilinx_pci_match, hose->dn)) - return; - - /* Hide the PCI host BARs from the kernel as their content doesn't - * fit well in the resource management - */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - - dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n", - pci_name(dev)); -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge); - -/** - * xilinx_pci_exclude_device - Don't do config access for non-root bus - * - * This is a hack. Config access to any bus other than bus 0 does not - * currently work on the ML510 so we prevent it here. - */ -static int -xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn) -{ - return (bus != 0); -} - -/** - * xilinx_pci_init - Find and register a Xilinx PCI host bridge - */ -void __init xilinx_pci_init(void) -{ - struct pci_controller *hose; - struct resource r; - void __iomem *pci_reg; - struct device_node *pci_node; - - pci_node = of_find_matching_node(NULL, xilinx_pci_match); - if(!pci_node) - return; - - if (of_address_to_resource(pci_node, 0, &r)) { - pr_err("xilinx-pci: cannot resolve base address\n"); - return; - } - - hose = pcibios_alloc_controller(pci_node); - if (!hose) { - pr_err("xilinx-pci: pcibios_alloc_controller() failed\n"); - return; - } - - /* Setup config space */ - setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR, - r.start + XPLB_PCI_DATA, - PPC_INDIRECT_TYPE_SET_CFG_TYPE); - - /* According to the xilinx plbv46_pci documentation the soft-core starts - * a self-init when the bus master enable bit is set. Without this bit - * set the pci bus can't be scanned. - */ - early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD); - - /* Set the max latency timer to 255 */ - early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff); - - /* Set the max bus number to 255 */ - pci_reg = of_iomap(pci_node, 0); - out_8(pci_reg + XPLB_PCI_BUS, 0xff); - iounmap(pci_reg); - - /* Nothing past the root bridge is working right now. By default - * exclude config access to anything except bus 0 */ - if (!ppc_md.pci_exclude_device) - ppc_md.pci_exclude_device = xilinx_pci_exclude_device; - - /* Register the host bridge with the linux kernel! */ - pci_process_bridge_OF_ranges(hose, pci_node, 1); - - pr_info("xilinx-pci: Registered PCI host bridge\n"); -} diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 26956c006987..0ccbd6fd6de1 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -316,7 +316,7 @@ config DTLK config XILINX_HWICAP tristate "Xilinx HWICAP Support" - depends on XILINX_VIRTEX || MICROBLAZE + depends on MICROBLAZE help This option enables support for Xilinx Internal Configuration Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index f65991a67af2..b174650e0f09 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -2007,7 +2007,7 @@ config FB_PS3_DEFAULT_SIZE_M config FB_XILINX tristate "Xilinx frame buffer support" - depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) + depends on FB && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT