| Message ID | ZEA-DV_OsmFg5egL@makrotopia.org |
|---|---|
| State | Accepted |
| Commit | 983f37ee08acb60435744f1b1e2afea2d2a09c48 |
| Headers | show |
| Series | [1/2] dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible | expand |
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index d583e816684cf..aabd104b12acf 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -150,6 +150,10 @@ mdio: mdio-bus { switch@0 { compatible = "mediatek,mt7531"; reg = <0>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 54 0>; ports {
Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support") the mt7530 driver can act as an interrupt controller. Wire up irq line of the MT7531 switch on the BananaPi BPi-R64 board, so the status of the PHYs of the five 1000Base-T ports doesn't need to be polled any more. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++ 1 file changed, 4 insertions(+)