new file mode 100644
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell mprls0025pa pressure sensor
+
+maintainers:
+ - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+ Honeywell pressure sensor of model mprls0025pa.
+
+ This sensor has an I2C and SPI interface. Only the I2C interface is
+ implemented.
+
+ There are many models with different pressure ranges available. The vendor
+ calls them "mpr series". All of them have the identical programming model and
+ differ in the pressure range, unit and transfer function.
+
+ To support different models one need to specify the pressure range as well as
+ the transfer function. Pressure range needs to be converted from its unit to
+ pascal.
+
+ The transfer function defines the ranges of numerical values delivered by the
+ sensor. The minimal range value stands for the minimum pressure and the
+ maximum value also for the maximum pressure with linear relation inside the
+ range.
+
+ Specifications about the devices can be found at:
+ https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
+ products/sensors/pressure-sensors/board-mount-pressure-sensors/
+ micropressure-mpr-series/documents/
+ sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+
+properties:
+ compatible:
+ const: honeywell,mprls0025pa
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Optional GPIO for resetting the device.
+ If not present the device is not resetted during the probe.
+ maxItems: 1
+
+ honeywell,pmin-pascal:
+ description:
+ Minimum pressure value the sensor can measure in pascal.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ honeywell,pmax-pascal:
+ description:
+ Maximum pressure value the sensor can measure in pascal.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ honeywell,transfer-function:
+ description: |
+ Transfer function which defines the range of valid values delivered by the
+ sensor.
+ 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
+ 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
+ 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ vdd-supply:
+ description: provide VDD power to the sensor.
+
+required:
+ - compatible
+ - reg
+ - honeywell,pmin-pascal
+ - honeywell,pmax-pascal
+ - honeywell,transfer-function
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@18 {
+ compatible = "honeywell,mprls0025pa";
+ reg = <0x18>;
+ reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+ honeywell,pmin-pascal = <0>;
+ honeywell,pmax-pascal = <172369>;
+ honeywell,transfer-function = <1>;
+ vdd-supply = <&vcc_3v3>;
+ };
+ };