diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
deleted file mode 100644
index aaf8c44cf..000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Rockchip RK3288 LVDS interface
-================================
-
-Required properties:
-- compatible: matching the soc type, one of
-	- "rockchip,rk3288-lvds";
-	- "rockchip,px30-lvds";
-
-- reg: physical base address of the controller and length
-	of memory mapped region.
-- clocks: must include clock specifiers corresponding to entries in the
-	clock-names property.
-- clock-names: must contain "pclk_lvds"
-
-- avdd1v0-supply: regulator phandle for 1.0V analog power
-- avdd1v8-supply: regulator phandle for 1.8V analog power
-- avdd3v3-supply: regulator phandle for 3.3V analog power
-
-- rockchip,grf: phandle to the general register files syscon
-- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
-
-- phys: LVDS/DSI DPHY (px30 only)
-- phy-names: name of the PHY, must be "dphy" (px30 only)
-
-Optional properties:
-- pinctrl-names: must contain a "lcdc" entry.
-- pinctrl-0: pin control group to be used for this controller.
-
-Required nodes:
-
-The lvds has two video ports as described by
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-Their connections are modeled using the OF graph bindings specified in
-	Documentation/devicetree/bindings/graph.txt.
-
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Example:
-
-lvds_panel: lvds-panel {
-	compatible = "auo,b101ean01";
-	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
-	data-mapping = "jeida-24";
-
-	ports {
-		panel_in_lvds: endpoint {
-			remote-endpoint = <&lvds_out_panel>;
-		};
-	};
-};
-
-For Rockchip RK3288:
-
-	lvds: lvds@ff96c000 {
-		compatible = "rockchip,rk3288-lvds";
-		rockchip,grf = <&grf>;
-		reg = <0xff96c000 0x4000>;
-		clocks = <&cru PCLK_LVDS_PHY>;
-		clock-names = "pclk_lvds";
-		pinctrl-names = "lcdc";
-		pinctrl-0 = <&lcdc_ctl>;
-		avdd1v0-supply = <&vdd10_lcd>;
-		avdd1v8-supply = <&vcc18_lcd>;
-		avdd3v3-supply = <&vcca_33>;
-		rockchip,output = "rgb";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			lvds_in: port@0 {
-				reg = <0>;
-
-				lvds_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_lvds>;
-				};
-				lvds_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_lvds>;
-				};
-			};
-
-			lvds_out: port@1 {
-				reg = <1>;
-
-				lvds_out_panel: endpoint {
-					remote-endpoint = <&panel_in_lvds>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.yaml
new file mode 100644
index 000000000..13e12f4b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description: Rockchip low-voltage differential signal (LVDS) transmitter
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-lvds
+      - rockchip,rk3288-lvds
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk_lvds
+
+  avdd1v0-supply:
+    description: Regulator phandle for 1.0V analog power.
+
+  avdd1v8-supply:
+    description: Regulator phandle for 1.8V analog power.
+
+  avdd3v3-supply:
+    description: Regulator phandle for 3.3V analog power.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the general register files syscon.
+
+  rockchip,output:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [rgb, lvds, duallvds]
+    description: This describes the output interface.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  pinctrl-names:
+    const: lcdc
+
+  pinctrl-0: true
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 0 for the VOP input, the remote endpoint maybe vopb or vopl.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 1 for either a panel or subsequent encoder.
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-lvds
+
+    then:
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-lvds
+
+    then:
+      required:
+        - reg
+        - clocks
+        - clock-names
+        - avdd1v0-supply
+        - avdd1v8-supply
+        - avdd3v3-supply
+
+required:
+  - compatible
+  - rockchip,grf
+  - rockchip,output
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    lvds: lvds@ff96c000 {
+      compatible = "rockchip,rk3288-lvds";
+      reg = <0xff96c000 0x4000>;
+      clocks = <&cru PCLK_LVDS_PHY>;
+      clock-names = "pclk_lvds";
+      avdd1v0-supply = <&vdd10_lcd>;
+      avdd1v8-supply = <&vcc18_lcd>;
+      avdd3v3-supply = <&vcca_33>;
+      pinctrl-names = "lcdc";
+      pinctrl-0 = <&lcdc_ctl>;
+      rockchip,grf = <&grf>;
+      rockchip,output = "rgb";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          lvds_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_lvds>;
+          };
+          lvds_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_lvds>;
+          };
+        };
+
+        lvds_out: port@1 {
+          reg = <1>;
+
+          lvds_out_panel: endpoint {
+            remote-endpoint = <&panel_in_lvds>;
+          };
+        };
+      };
+    };
