diff mbox series

[v2,1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only

Message ID e2e30c3b-21db-72d1-1b40-d1f2fbcaaa43@gmail.com
State Superseded
Headers show
Series [v2,1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only | expand

Commit Message

Heiner Kallweit April 27, 2022, 7:23 p.m. UTC
There are slave devices that understand I2C but have read-only
SDA and SCL. Examples are FD650 7-segment LED controller and
its derivatives. Typical board designs don't even have a
pull-up for both pins. Therefore don't enforce open-drain
if SDA and SCL both are unidirectional. This patch makes
i2c-gpio usable with such devices, based on new DT property
i2c-gpio,sda-output-only.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- improve commit message
---
 Documentation/devicetree/bindings/i2c/i2c-gpio.yaml | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Rob Herring May 3, 2022, 9:11 p.m. UTC | #1
On Wed, 27 Apr 2022 21:23:28 +0200, Heiner Kallweit wrote:
> There are slave devices that understand I2C but have read-only
> SDA and SCL. Examples are FD650 7-segment LED controller and
> its derivatives. Typical board designs don't even have a
> pull-up for both pins. Therefore don't enforce open-drain
> if SDA and SCL both are unidirectional. This patch makes
> i2c-gpio usable with such devices, based on new DT property
> i2c-gpio,sda-output-only.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - improve commit message
> ---
>  Documentation/devicetree/bindings/i2c/i2c-gpio.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index fd0402845..25cd1b260 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -33,6 +33,10 @@  properties:
       open drain.
     maxItems: 1
 
+  i2c-gpio,sda-output-only:
+    description: sda as output only
+    type: boolean
+
   i2c-gpio,scl-output-only:
     description: scl as output only
     type: boolean