new file mode 100644
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI Controller Device Tree Bindings
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2711-hdmi0
+ - brcm,bcm2711-hdmi1
+
+ reg:
+ items:
+ - description: HDMI controller register range
+ - description: DVP register range
+ - description: HDMI PHY register range
+ - description: Rate Manager register range
+ - description: Packet RAM register range
+ - description: Metadata RAM register range
+ - description: CSC register range
+ - description: CEC register range
+ - description: HD register range
+
+ reg-names:
+ items:
+ - const: hdmi
+ - const: dvp
+ - const: phy
+ - const: rm
+ - const: packet
+ - const: metadata
+ - const: csc
+ - const: cec
+ - const: hd
+
+ clocks:
+ description: The HDMI state machine clock
+
+ clock-names:
+ const: hdmi
+
+ ddc:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+ description: >
+ Phandle of the I2C controller used for DDC EDID probing
+
+ hpd-gpios:
+ description: >
+ The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+ as an interrupt/status bit in the HDMI controller itself)
+
+ dmas:
+ maxItems: 1
+ description: >
+ Should contain one entry pointing to the DMA channel used to
+ transfer audio data.
+
+ dma-names:
+ const: audio-rx
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - resets
+ - ddc
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi0: hdmi@7ef00700 {
+ compatible = "brcm,bcm2711-hdmi0";
+ reg = <0x7ef00700 0x300>,
+ <0x7ef00300 0x200>,
+ <0x7ef00f00 0x80>,
+ <0x7ef00f80 0x80>,
+ <0x7ef01b00 0x200>,
+ <0x7ef01f00 0x400>,
+ <0x7ef00200 0x80>,
+ <0x7ef04300 0x100>,
+ <0x7ef20000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ clocks = <&firmware_clocks 13>;
+ clock-names = "hdmi";
+ resets = <&dvp 0>;
+ ddc = <&ddc0>;
+ };
+
+...
The HDMI controllers found in the BCM2711 SoC need some adjustments to the bindings, especially since the registers have been shuffled around in more register ranges. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml