diff mbox series

[09/16] efi/libstub: Move helper function to related file

Message ID a1c01892bad6e4f05da96380b63ff14a82842d27.1662459668.git.baskov@ispras.ru
State Superseded
Headers show
Series x86_64: Improvements at compressed kernel stage | expand

Commit Message

Evgeniy Baskov Sept. 6, 2022, 10:41 a.m. UTC
efi_adjust_memory_range_protection() can be useful outside x86-stub.c.

Move it to mem.c, where memory related code resides and make it
non-static.

Change its behavior to setup exact attibutes and disallow making memory
regions readable and writable simultaniosly for supported
configurations.

Signed-off-by: Evgeniy Baskov <baskov@ispras.ru>
---
 drivers/firmware/efi/libstub/efistub.h  |   4 +
 drivers/firmware/efi/libstub/mem.c      | 101 ++++++++++++++++++++++++
 drivers/firmware/efi/libstub/x86-stub.c |  67 ++--------------
 3 files changed, 111 insertions(+), 61 deletions(-)

Comments

Ard Biesheuvel Oct. 19, 2022, 7:21 a.m. UTC | #1
On Tue, 6 Sept 2022 at 12:42, Evgeniy Baskov <baskov@ispras.ru> wrote:
>
> efi_adjust_memory_range_protection() can be useful outside x86-stub.c.
>
> Move it to mem.c, where memory related code resides and make it
> non-static.
>
> Change its behavior to setup exact attibutes and disallow making memory
> regions readable and writable simultaniosly for supported
> configurations.
>
> Signed-off-by: Evgeniy Baskov <baskov@ispras.ru>

Acked-by: Ard Biesheuvel <ardb@kernel.org>

> ---
>  drivers/firmware/efi/libstub/efistub.h  |   4 +
>  drivers/firmware/efi/libstub/mem.c      | 101 ++++++++++++++++++++++++
>  drivers/firmware/efi/libstub/x86-stub.c |  67 ++--------------
>  3 files changed, 111 insertions(+), 61 deletions(-)
>
> diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
> index b0ae0a454404..22fe28385db7 100644
> --- a/drivers/firmware/efi/libstub/efistub.h
> +++ b/drivers/firmware/efi/libstub/efistub.h
> @@ -907,6 +907,10 @@ efi_status_t efi_relocate_kernel(unsigned long *image_addr,
>                                  unsigned long alignment,
>                                  unsigned long min_addr);
>
> +efi_status_t efi_adjust_memory_range_protection(unsigned long start,
> +                                               unsigned long size,
> +                                               unsigned long attributes);
> +
>  efi_status_t efi_parse_options(char const *cmdline);
>
>  void efi_parse_option_graphics(char *option);
> diff --git a/drivers/firmware/efi/libstub/mem.c b/drivers/firmware/efi/libstub/mem.c
> index feef8d4be113..89ebc8ad2c22 100644
> --- a/drivers/firmware/efi/libstub/mem.c
> +++ b/drivers/firmware/efi/libstub/mem.c
> @@ -130,3 +130,104 @@ void efi_free(unsigned long size, unsigned long addr)
>         nr_pages = round_up(size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
>         efi_bs_call(free_pages, addr, nr_pages);
>  }
> +
> +/**
> + * efi_adjust_memory_range_protection() - change memory range protection attributes
> + * @start:     memory range start address
> + * @size:      memory range size
> + *
> + * Actual memory range for which memory attributes are modified is
> + * the smallest ranged with start address and size aligned to EFI_PAGE_SIZE
> + * that includes [start, start + size].
> + *
> + * @return: status code
> + */
> +efi_status_t efi_adjust_memory_range_protection(unsigned long start,
> +                                               unsigned long size,
> +                                               unsigned long attributes)
> +{
> +       efi_status_t status;
> +       efi_gcd_memory_space_desc_t desc;
> +       efi_physical_addr_t end, next;
> +       efi_physical_addr_t rounded_start, rounded_end;
> +       efi_physical_addr_t unprotect_start, unprotect_size;
> +       int has_system_memory = 0;
> +
> +       if (efi_dxe_table == NULL)
> +               return EFI_UNSUPPORTED;
> +
> +       /*
> +        * This function should not be used to modify attributes
> +        * other than writable/executable.
> +        */
> +
> +       if ((attributes & ~(EFI_MEMORY_RO | EFI_MEMORY_XP)) != 0)
> +               return EFI_INVALID_PARAMETER;
> +
> +       /*
> +        * Disallow simultaniously executable and writable memory
> +        * to inforce W^X policy if direct extraction code is enabled.
> +        */
> +
> +       if ((attributes & (EFI_MEMORY_RO | EFI_MEMORY_XP)) == 0 &&
> +           IS_ENABLED(CONFIG_EFI_STUB_EXTRACT_DIRECT))
> +               return EFI_INVALID_PARAMETER;
> +
> +       rounded_start = rounddown(start, EFI_PAGE_SIZE);
> +       rounded_end = roundup(start + size, EFI_PAGE_SIZE);
> +
> +       /*
> +        * Don't modify memory region attributes, they are
> +        * already suitable, to lower the possibility to
> +        * encounter firmware bugs.
> +        */
> +
> +       for (end = start + size; start < end; start = next) {
> +
> +               status = efi_dxe_call(get_memory_space_descriptor,
> +                                     start, &desc);
> +
> +               if (status != EFI_SUCCESS) {
> +                       efi_warn("Unable to get memory descriptor at %lx\n",
> +                                start);
> +                       return status;
> +               }
> +
> +               next = desc.base_address + desc.length;
> +
> +               /*
> +                * Only system memory is suitable for trampoline/kernel image
> +                * placement, so only this type of memory needs its attributes
> +                * to be modified.
> +                */
> +
> +               if (desc.gcd_memory_type != EfiGcdMemoryTypeSystemMemory) {
> +                       efi_warn("Attempted to change protection of special memory range\n");
> +                       return EFI_UNSUPPORTED;
> +               }
> +
> +               if (((desc.attributes ^ attributes) &
> +                    (EFI_MEMORY_RO | EFI_MEMORY_XP)) == 0)
> +                       continue;
> +
> +               desc.attributes &= ~(EFI_MEMORY_RO | EFI_MEMORY_XP);
> +               desc.attributes |= attributes;
> +
> +               unprotect_start = max(rounded_start, desc.base_address);
> +               unprotect_size = min(rounded_end, next) - unprotect_start;
> +
> +               status = efi_dxe_call(set_memory_space_attributes,
> +                                     unprotect_start, unprotect_size,
> +                                     desc.attributes);
> +
> +               if (status != EFI_SUCCESS) {
> +                       efi_warn("Unable to unprotect memory range [%08lx,%08lx]: %lx\n",
> +                                (unsigned long)unprotect_start,
> +                                (unsigned long)(unprotect_start + unprotect_size),
> +                                status);
> +                       return status;
> +               }
> +       }
> +
> +       return EFI_SUCCESS;
> +}
> diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
> index 05ae8bcc9d67..678f9c2ccafc 100644
> --- a/drivers/firmware/efi/libstub/x86-stub.c
> +++ b/drivers/firmware/efi/libstub/x86-stub.c
> @@ -212,62 +212,6 @@ static void retrieve_apple_device_properties(struct boot_params *boot_params)
>         }
>  }
>
> -static void
> -adjust_memory_range_protection(unsigned long start, unsigned long size)
> -{
> -       efi_status_t status;
> -       efi_gcd_memory_space_desc_t desc;
> -       unsigned long end, next;
> -       unsigned long rounded_start, rounded_end;
> -       unsigned long unprotect_start, unprotect_size;
> -       int has_system_memory = 0;
> -
> -       if (efi_dxe_table == NULL)
> -               return;
> -
> -       rounded_start = rounddown(start, EFI_PAGE_SIZE);
> -       rounded_end = roundup(start + size, EFI_PAGE_SIZE);
> -
> -       /*
> -        * Don't modify memory region attributes, they are
> -        * already suitable, to lower the possibility to
> -        * encounter firmware bugs.
> -        */
> -
> -       for (end = start + size; start < end; start = next) {
> -
> -               status = efi_dxe_call(get_memory_space_descriptor, start, &desc);
> -
> -               if (status != EFI_SUCCESS)
> -                       return;
> -
> -               next = desc.base_address + desc.length;
> -
> -               /*
> -                * Only system memory is suitable for trampoline/kernel image placement,
> -                * so only this type of memory needs its attributes to be modified.
> -                */
> -
> -               if (desc.gcd_memory_type != EfiGcdMemoryTypeSystemMemory ||
> -                   (desc.attributes & (EFI_MEMORY_RO | EFI_MEMORY_XP)) == 0)
> -                       continue;
> -
> -               unprotect_start = max(rounded_start, (unsigned long)desc.base_address);
> -               unprotect_size = min(rounded_end, next) - unprotect_start;
> -
> -               status = efi_dxe_call(set_memory_space_attributes,
> -                                     unprotect_start, unprotect_size,
> -                                     EFI_MEMORY_WB);
> -
> -               if (status != EFI_SUCCESS) {
> -                       efi_warn("Unable to unprotect memory range [%08lx,%08lx]: %lx\n",
> -                                unprotect_start,
> -                                unprotect_start + unprotect_size,
> -                                status);
> -               }
> -       }
> -}
> -
>  /*
>   * Trampoline takes 2 pages and can be loaded in first megabyte of memory
>   * with its end placed between 128k and 640k where BIOS might start.
> @@ -291,12 +235,12 @@ setup_memory_protection(unsigned long image_base, unsigned long image_size)
>          * and relocated kernel image.
>          */
>
> -       adjust_memory_range_protection(TRAMPOLINE_PLACEMENT_BASE,
> -                                      TRAMPOLINE_PLACEMENT_SIZE);
> +       efi_adjust_memory_range_protection(TRAMPOLINE_PLACEMENT_BASE,
> +                                          TRAMPOLINE_PLACEMENT_SIZE, 0);
>
>  #ifdef CONFIG_64BIT
>         if (image_base != (unsigned long)startup_32)
> -               adjust_memory_range_protection(image_base, image_size);
> +               efi_adjust_memory_range_protection(image_base, image_size, 0);
>  #else
>         /*
>          * Clear protection flags on a whole range of possible
> @@ -306,8 +250,9 @@ setup_memory_protection(unsigned long image_base, unsigned long image_size)
>          * need to remove possible protection on relocated image
>          * itself disregarding further relocations.
>          */
> -       adjust_memory_range_protection(LOAD_PHYSICAL_ADDR,
> -                                      KERNEL_IMAGE_SIZE - LOAD_PHYSICAL_ADDR);
> +       efi_adjust_memory_range_protection(LOAD_PHYSICAL_ADDR,
> +                                          KERNEL_IMAGE_SIZE - LOAD_PHYSICAL_ADDR,
> +                                          0);
>  #endif
>  }
>
> --
> 2.35.1
>
diff mbox series

Patch

diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index b0ae0a454404..22fe28385db7 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -907,6 +907,10 @@  efi_status_t efi_relocate_kernel(unsigned long *image_addr,
 				 unsigned long alignment,
 				 unsigned long min_addr);
 
+efi_status_t efi_adjust_memory_range_protection(unsigned long start,
+						unsigned long size,
+						unsigned long attributes);
+
 efi_status_t efi_parse_options(char const *cmdline);
 
 void efi_parse_option_graphics(char *option);
diff --git a/drivers/firmware/efi/libstub/mem.c b/drivers/firmware/efi/libstub/mem.c
index feef8d4be113..89ebc8ad2c22 100644
--- a/drivers/firmware/efi/libstub/mem.c
+++ b/drivers/firmware/efi/libstub/mem.c
@@ -130,3 +130,104 @@  void efi_free(unsigned long size, unsigned long addr)
 	nr_pages = round_up(size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
 	efi_bs_call(free_pages, addr, nr_pages);
 }
+
+/**
+ * efi_adjust_memory_range_protection() - change memory range protection attributes
+ * @start:	memory range start address
+ * @size:	memory range size
+ *
+ * Actual memory range for which memory attributes are modified is
+ * the smallest ranged with start address and size aligned to EFI_PAGE_SIZE
+ * that includes [start, start + size].
+ *
+ * @return: status code
+ */
+efi_status_t efi_adjust_memory_range_protection(unsigned long start,
+						unsigned long size,
+						unsigned long attributes)
+{
+	efi_status_t status;
+	efi_gcd_memory_space_desc_t desc;
+	efi_physical_addr_t end, next;
+	efi_physical_addr_t rounded_start, rounded_end;
+	efi_physical_addr_t unprotect_start, unprotect_size;
+	int has_system_memory = 0;
+
+	if (efi_dxe_table == NULL)
+		return EFI_UNSUPPORTED;
+
+	/*
+	 * This function should not be used to modify attributes
+	 * other than writable/executable.
+	 */
+
+	if ((attributes & ~(EFI_MEMORY_RO | EFI_MEMORY_XP)) != 0)
+		return EFI_INVALID_PARAMETER;
+
+	/*
+	 * Disallow simultaniously executable and writable memory
+	 * to inforce W^X policy if direct extraction code is enabled.
+	 */
+
+	if ((attributes & (EFI_MEMORY_RO | EFI_MEMORY_XP)) == 0 &&
+	    IS_ENABLED(CONFIG_EFI_STUB_EXTRACT_DIRECT))
+		return EFI_INVALID_PARAMETER;
+
+	rounded_start = rounddown(start, EFI_PAGE_SIZE);
+	rounded_end = roundup(start + size, EFI_PAGE_SIZE);
+
+	/*
+	 * Don't modify memory region attributes, they are
+	 * already suitable, to lower the possibility to
+	 * encounter firmware bugs.
+	 */
+
+	for (end = start + size; start < end; start = next) {
+
+		status = efi_dxe_call(get_memory_space_descriptor,
+				      start, &desc);
+
+		if (status != EFI_SUCCESS) {
+			efi_warn("Unable to get memory descriptor at %lx\n",
+				 start);
+			return status;
+		}
+
+		next = desc.base_address + desc.length;
+
+		/*
+		 * Only system memory is suitable for trampoline/kernel image
+		 * placement, so only this type of memory needs its attributes
+		 * to be modified.
+		 */
+
+		if (desc.gcd_memory_type != EfiGcdMemoryTypeSystemMemory) {
+			efi_warn("Attempted to change protection of special memory range\n");
+			return EFI_UNSUPPORTED;
+		}
+
+		if (((desc.attributes ^ attributes) &
+		     (EFI_MEMORY_RO | EFI_MEMORY_XP)) == 0)
+			continue;
+
+		desc.attributes &= ~(EFI_MEMORY_RO | EFI_MEMORY_XP);
+		desc.attributes |= attributes;
+
+		unprotect_start = max(rounded_start, desc.base_address);
+		unprotect_size = min(rounded_end, next) - unprotect_start;
+
+		status = efi_dxe_call(set_memory_space_attributes,
+				      unprotect_start, unprotect_size,
+				      desc.attributes);
+
+		if (status != EFI_SUCCESS) {
+			efi_warn("Unable to unprotect memory range [%08lx,%08lx]: %lx\n",
+				 (unsigned long)unprotect_start,
+				 (unsigned long)(unprotect_start + unprotect_size),
+				 status);
+			return status;
+		}
+	}
+
+	return EFI_SUCCESS;
+}
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 05ae8bcc9d67..678f9c2ccafc 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -212,62 +212,6 @@  static void retrieve_apple_device_properties(struct boot_params *boot_params)
 	}
 }
 
-static void
-adjust_memory_range_protection(unsigned long start, unsigned long size)
-{
-	efi_status_t status;
-	efi_gcd_memory_space_desc_t desc;
-	unsigned long end, next;
-	unsigned long rounded_start, rounded_end;
-	unsigned long unprotect_start, unprotect_size;
-	int has_system_memory = 0;
-
-	if (efi_dxe_table == NULL)
-		return;
-
-	rounded_start = rounddown(start, EFI_PAGE_SIZE);
-	rounded_end = roundup(start + size, EFI_PAGE_SIZE);
-
-	/*
-	 * Don't modify memory region attributes, they are
-	 * already suitable, to lower the possibility to
-	 * encounter firmware bugs.
-	 */
-
-	for (end = start + size; start < end; start = next) {
-
-		status = efi_dxe_call(get_memory_space_descriptor, start, &desc);
-
-		if (status != EFI_SUCCESS)
-			return;
-
-		next = desc.base_address + desc.length;
-
-		/*
-		 * Only system memory is suitable for trampoline/kernel image placement,
-		 * so only this type of memory needs its attributes to be modified.
-		 */
-
-		if (desc.gcd_memory_type != EfiGcdMemoryTypeSystemMemory ||
-		    (desc.attributes & (EFI_MEMORY_RO | EFI_MEMORY_XP)) == 0)
-			continue;
-
-		unprotect_start = max(rounded_start, (unsigned long)desc.base_address);
-		unprotect_size = min(rounded_end, next) - unprotect_start;
-
-		status = efi_dxe_call(set_memory_space_attributes,
-				      unprotect_start, unprotect_size,
-				      EFI_MEMORY_WB);
-
-		if (status != EFI_SUCCESS) {
-			efi_warn("Unable to unprotect memory range [%08lx,%08lx]: %lx\n",
-				 unprotect_start,
-				 unprotect_start + unprotect_size,
-				 status);
-		}
-	}
-}
-
 /*
  * Trampoline takes 2 pages and can be loaded in first megabyte of memory
  * with its end placed between 128k and 640k where BIOS might start.
@@ -291,12 +235,12 @@  setup_memory_protection(unsigned long image_base, unsigned long image_size)
 	 * and relocated kernel image.
 	 */
 
-	adjust_memory_range_protection(TRAMPOLINE_PLACEMENT_BASE,
-				       TRAMPOLINE_PLACEMENT_SIZE);
+	efi_adjust_memory_range_protection(TRAMPOLINE_PLACEMENT_BASE,
+					   TRAMPOLINE_PLACEMENT_SIZE, 0);
 
 #ifdef CONFIG_64BIT
 	if (image_base != (unsigned long)startup_32)
-		adjust_memory_range_protection(image_base, image_size);
+		efi_adjust_memory_range_protection(image_base, image_size, 0);
 #else
 	/*
 	 * Clear protection flags on a whole range of possible
@@ -306,8 +250,9 @@  setup_memory_protection(unsigned long image_base, unsigned long image_size)
 	 * need to remove possible protection on relocated image
 	 * itself disregarding further relocations.
 	 */
-	adjust_memory_range_protection(LOAD_PHYSICAL_ADDR,
-				       KERNEL_IMAGE_SIZE - LOAD_PHYSICAL_ADDR);
+	efi_adjust_memory_range_protection(LOAD_PHYSICAL_ADDR,
+					   KERNEL_IMAGE_SIZE - LOAD_PHYSICAL_ADDR,
+					   0);
 #endif
 }