diff mbox series

[v2,1/2] dt-bindings: backlight: Add MPS MP3309C

Message ID 20230915140516.1294925-1-f.suligoi@asem.it
State New
Headers show
Series [v2,1/2] dt-bindings: backlight: Add MPS MP3309C | expand

Commit Message

Flavio Suligoi Sept. 15, 2023, 2:05 p.m. UTC
The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
programmable switching frequency to optimize efficiency.
The brightness can be controlled either by I2C commands (called "analog"
mode) or by a PWM input signal (PWM mode).
This driver supports both modes.

For device driver details, please refer to:
- drivers/video/backlight/mp3309c_bl.c

The datasheet is available at:
- https://www.monolithicpower.com/en/mp3309c.html

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
---

v2:
 - remove useless properties (dimming-mode, pinctrl-names, pinctrl-0,
   switch-on-delay-ms, switch-off-delay-ms, reset-gpios, reset-on-delay-ms,
   reset-on-length-ms)
 - add common.yaml#
 - remove already included properties (default-brightness, max-brightness)
 - substitute three boolean properties, used for the overvoltage-protection
   values, with a single enum property
 - remove some conditional definitions
 - remove the 2nd example
v1:
 - first version

 .../bindings/leds/backlight/mps,mp3309c.yaml  | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml

Comments

Rob Herring Sept. 15, 2023, 3:35 p.m. UTC | #1
On Fri, 15 Sep 2023 16:05:15 +0200, Flavio Suligoi wrote:
> The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
> programmable switching frequency to optimize efficiency.
> The brightness can be controlled either by I2C commands (called "analog"
> mode) or by a PWM input signal (PWM mode).
> This driver supports both modes.
> 
> For device driver details, please refer to:
> - drivers/video/backlight/mp3309c_bl.c
> 
> The datasheet is available at:
> - https://www.monolithicpower.com/en/mp3309c.html
> 
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
> 
> v2:
>  - remove useless properties (dimming-mode, pinctrl-names, pinctrl-0,
>    switch-on-delay-ms, switch-off-delay-ms, reset-gpios, reset-on-delay-ms,
>    reset-on-length-ms)
>  - add common.yaml#
>  - remove already included properties (default-brightness, max-brightness)
>  - substitute three boolean properties, used for the overvoltage-protection
>    values, with a single enum property
>  - remove some conditional definitions
>  - remove the 2nd example
> v1:
>  - first version
> 
>  .../bindings/leds/backlight/mps,mp3309c.yaml  | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.example.dtb: /example-0/i2c/backlight@17: failed to match any schema with compatible: ['mps,mp3309c-backlight']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230915140516.1294925-1-f.suligoi@asem.it

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Conor Dooley Sept. 15, 2023, 3:44 p.m. UTC | #2
Yo,

On Fri, Sep 15, 2023 at 04:05:15PM +0200, Flavio Suligoi wrote:
> The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
> programmable switching frequency to optimize efficiency.
> The brightness can be controlled either by I2C commands (called "analog"
> mode) or by a PWM input signal (PWM mode).
> This driver supports both modes.
> 
> For device driver details, please refer to:
> - drivers/video/backlight/mp3309c_bl.c
> 
> The datasheet is available at:
> - https://www.monolithicpower.com/en/mp3309c.html
> 
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
> 
> v2:
>  - remove useless properties (dimming-mode, pinctrl-names, pinctrl-0,
>    switch-on-delay-ms, switch-off-delay-ms, reset-gpios, reset-on-delay-ms,
>    reset-on-length-ms)
>  - add common.yaml#
>  - remove already included properties (default-brightness, max-brightness)
>  - substitute three boolean properties, used for the overvoltage-protection
>    values, with a single enum property
>  - remove some conditional definitions
>  - remove the 2nd example
> v1:
>  - first version
> 
>  .../bindings/leds/backlight/mps,mp3309c.yaml  | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> new file mode 100644
> index 000000000000..99ccdba2c08f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MPS MP3309C backlight
> +
> +maintainers:
> +  - Flavio Suligoi <f.suligoi@asem.it>
> +
> +description: |
> +  The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
> +  programmable switching frequency to optimize efficiency.
> +  It supports two different dimming modes:
> +
> +  - analog mode, via I2C commands (default)
> +  - PWM controlled mode.
> +
> +  The datasheet is available at:
> +  https://www.monolithicpower.com/en/mp3309c.html
> +
> +allOf:
> +  - $ref: common.yaml#
> +
> +properties:
> +  compatible:
> +    const: mps,mp3309c
> +
> +  reg:
> +    maxItems: 1
> +
> +  pwms:
> +    description: if present, the backlight is controlled in PWM mode.
> +    maxItems: 1
> +
> +  enable-gpios:
> +    description: GPIO used to enable the backlight in "analog-i2c" dimming mode.
> +    maxItems: 1
> +
> +  mps,overvoltage-protection-microvolt:
> +    description: Overvoltage protection (13.5V, 24V or 35.5V). If missing, the
> +      hardware default of 35.5V is used.
> +    enum: [ 13500000, 24000000, 35500000 ]
You can add "default: 35500000" and drop the free form default as text
in the description.

Cheers,
Conor.

> +
> +  mps,no-sync-mode:
> +    description: disable synchronous rectification mode
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +  - max-brightness
> +  - default-brightness
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        /* Backlight with PWM control */
> +        backlight_pwm: backlight@17 {
> +            compatible = "mps,mp3309c-backlight";

As the bot pointed out, the compatible doesn't contain "backlight".

> +            reg = <0x17>;
> +            pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> +            max-brightness = <100>;
> +            default-brightness = <80>;
> +            overvoltage-protection-microvolt = <24000000>;
> +        };
> +    };
> -- 
> 2.34.1
>
Rob Herring Sept. 15, 2023, 3:48 p.m. UTC | #3
On Fri, Sep 15, 2023 at 04:05:15PM +0200, Flavio Suligoi wrote:
> The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
> programmable switching frequency to optimize efficiency.
> The brightness can be controlled either by I2C commands (called "analog"
> mode) or by a PWM input signal (PWM mode).
> This driver supports both modes.
> 
> For device driver details, please refer to:
> - drivers/video/backlight/mp3309c_bl.c
> 
> The datasheet is available at:
> - https://www.monolithicpower.com/en/mp3309c.html
> 
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
> 
> v2:
>  - remove useless properties (dimming-mode, pinctrl-names, pinctrl-0,
>    switch-on-delay-ms, switch-off-delay-ms, reset-gpios, reset-on-delay-ms,
>    reset-on-length-ms)
>  - add common.yaml#
>  - remove already included properties (default-brightness, max-brightness)
>  - substitute three boolean properties, used for the overvoltage-protection
>    values, with a single enum property
>  - remove some conditional definitions
>  - remove the 2nd example
> v1:
>  - first version
> 
>  .../bindings/leds/backlight/mps,mp3309c.yaml  | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> new file mode 100644
> index 000000000000..99ccdba2c08f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MPS MP3309C backlight
> +
> +maintainers:
> +  - Flavio Suligoi <f.suligoi@asem.it>
> +
> +description: |
> +  The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
> +  programmable switching frequency to optimize efficiency.
> +  It supports two different dimming modes:
> +
> +  - analog mode, via I2C commands (default)
> +  - PWM controlled mode.
> +
> +  The datasheet is available at:
> +  https://www.monolithicpower.com/en/mp3309c.html
> +
> +allOf:
> +  - $ref: common.yaml#
> +
> +properties:
> +  compatible:
> +    const: mps,mp3309c
> +
> +  reg:
> +    maxItems: 1
> +
> +  pwms:
> +    description: if present, the backlight is controlled in PWM mode.
> +    maxItems: 1
> +
> +  enable-gpios:
> +    description: GPIO used to enable the backlight in "analog-i2c" dimming mode.
> +    maxItems: 1
> +
> +  mps,overvoltage-protection-microvolt:
> +    description: Overvoltage protection (13.5V, 24V or 35.5V). If missing, the
> +      hardware default of 35.5V is used.

default: 35500000

instead of prose saying the same thing.

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> +    enum: [ 13500000, 24000000, 35500000 ]
> +
> +  mps,no-sync-mode:
> +    description: disable synchronous rectification mode
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +  - max-brightness
> +  - default-brightness
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        /* Backlight with PWM control */
> +        backlight_pwm: backlight@17 {
> +            compatible = "mps,mp3309c-backlight";
> +            reg = <0x17>;
> +            pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> +            max-brightness = <100>;
> +            default-brightness = <80>;
> +            overvoltage-protection-microvolt = <24000000>;
> +        };
> +    };
> -- 
> 2.34.1
>
Flavio Suligoi Sept. 18, 2023, 12:22 p.m. UTC | #4
Hi Conor,

...


> On Fri, Sep 15, 2023 at 04:05:15PM +0200, Flavio Suligoi wrote:
> > The Monolithic Power (MPS) MP3309C is a WLED step-up converter,
> > featuring a programmable switching frequency to optimize efficiency.
> > The brightness can be controlled either by I2C commands (called "analog"
> > mode) or by a PWM input signal (PWM mode).
> > This driver supports both modes.
> >
> > For device driver details, please refer to:
> > - drivers/video/backlight/mp3309c_bl.c
> >
> > The datasheet is available at:
> > - https://www.monolithicpower.com/en/mp3309c.html
> >
> > Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> > ---
> >
> > v2:
> >  - remove useless properties (dimming-mode, pinctrl-names, pinctrl-0,
> >    switch-on-delay-ms, switch-off-delay-ms, reset-gpios, reset-on-delay-ms,
> >    reset-on-length-ms)
> >  - add common.yaml#
> >  - remove already included properties (default-brightness,
> > max-brightness)
> >  - substitute three boolean properties, used for the overvoltage-protection
> >    values, with a single enum property
> >  - remove some conditional definitions
> >  - remove the 2nd example
> > v1:
> >  - first version
> >
> >  .../bindings/leds/backlight/mps,mp3309c.yaml  | 73
> > +++++++++++++++++++
> >  1 file changed, 73 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > new file mode 100644
> > index 000000000000..99ccdba2c08f
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yam
> > +++ l
> > @@ -0,0 +1,73 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MPS MP3309C backlight
> > +
> > +maintainers:
> > +  - Flavio Suligoi <f.suligoi@asem.it>

...

> > +  mps,overvoltage-protection-microvolt:
> > +    description: Overvoltage protection (13.5V, 24V or 35.5V). If missing, the
> > +      hardware default of 35.5V is used.
> > +    enum: [ 13500000, 24000000, 35500000 ]
> You can add "default: 35500000" and drop the free form default as text in the
> description.

Ok, thanks.

> 
> Cheers,
> Conor.
> 
> > +
> > +  mps,no-sync-mode:
> > +    description: disable synchronous rectification mode
> > +    type: boolean
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - max-brightness
> > +  - default-brightness
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        /* Backlight with PWM control */
> > +        backlight_pwm: backlight@17 {
> > +            compatible = "mps,mp3309c-backlight";
> 
> As the bot pointed out, the compatible doesn't contain "backlight".

Right, fixed!

Thanks and regards,
Flavio
Flavio Suligoi Sept. 18, 2023, 12:30 p.m. UTC | #5
HI Rob,

...

> Subject: Re: [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C
> 

...

> > +
> > +  mps,overvoltage-protection-microvolt:
> > +    description: Overvoltage protection (13.5V, 24V or 35.5V). If missing, the
> > +      hardware default of 35.5V is used.
> 
> default: 35500000
> 
> instead of prose saying the same thing.
> 
> With that,
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

Ok, right, I'll fix it in my next version.

I prefer to wait a few days before sending the next version,
to wait if there are other comments on the device driver file as well.

Just a question about the procedure: in my next version, I have to add the sentence:

"Reviewed-by: Rob Herring <robh@kernel.org>"

in my commit or it will be added again by you?

Thanks for your help,
Flavio
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
new file mode 100644
index 000000000000..99ccdba2c08f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MPS MP3309C backlight
+
+maintainers:
+  - Flavio Suligoi <f.suligoi@asem.it>
+
+description: |
+  The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
+  programmable switching frequency to optimize efficiency.
+  It supports two different dimming modes:
+
+  - analog mode, via I2C commands (default)
+  - PWM controlled mode.
+
+  The datasheet is available at:
+  https://www.monolithicpower.com/en/mp3309c.html
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: mps,mp3309c
+
+  reg:
+    maxItems: 1
+
+  pwms:
+    description: if present, the backlight is controlled in PWM mode.
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO used to enable the backlight in "analog-i2c" dimming mode.
+    maxItems: 1
+
+  mps,overvoltage-protection-microvolt:
+    description: Overvoltage protection (13.5V, 24V or 35.5V). If missing, the
+      hardware default of 35.5V is used.
+    enum: [ 13500000, 24000000, 35500000 ]
+
+  mps,no-sync-mode:
+    description: disable synchronous rectification mode
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - max-brightness
+  - default-brightness
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Backlight with PWM control */
+        backlight_pwm: backlight@17 {
+            compatible = "mps,mp3309c-backlight";
+            reg = <0x17>;
+            pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
+            max-brightness = <100>;
+            default-brightness = <80>;
+            overvoltage-protection-microvolt = <24000000>;
+        };
+    };