mbox series

[0/3] pinctrl: aspeed: AST2600 pinconf fixes

Message ID 20200909114312.2863675-1-andrew@aj.id.au
Headers show
Series pinctrl: aspeed: AST2600 pinconf fixes | expand

Message

Andrew Jeffery Sept. 9, 2020, 11:43 a.m. UTC 
Hello,

The AST2600 pinctrl driver was missing support for bias control on the 1.8V
GPIO pins, and in the process of resolving that I discovered a couple of other
bugs that are fixed in the first two patches of the series.

Please review!

Andrew

Andrew Jeffery (3):
  pinctrl: aspeed: Format pinconf debug consistent with pinmux
  pinctrl: aspeed: Use the right pinconf mask
  pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banks

 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 17 +++++++++++++++++
 drivers/pinctrl/aspeed/pinctrl-aspeed.c    |  8 ++++----
 2 files changed, 21 insertions(+), 4 deletions(-)

Comments

Linus Walleij Sept. 29, 2020, 12:25 p.m. UTC | #1 
On Wed, Sep 9, 2020 at 1:43 PM Andrew Jeffery <andrew@aj.id.au> wrote:

> The AST2600 pinctrl driver was missing support for bias control on the 1.8V

> GPIO pins, and in the process of resolving that I discovered a couple of other

> bugs that are fixed in the first two patches of the series.


All 3 patches applied.

Yours,
Linus Walleij