| Message ID | 20220419141846.598305-1-maz@kernel.org |
|---|---|
| Headers | show |
| Series | gpiolib: Handle immutable irq_chip structures | expand |
On Tue, Apr 19, 2022 at 4:19 PM Marc Zyngier <maz@kernel.org> wrote: > This is a followup from [2]. > > I recently realised that the gpiolib play ugly tricks on the > unsuspecting irq_chip structures by patching the callbacks. > > Not only this breaks when an irq_chip structure is made const (which > really should be the default case), but it also forces this structure > to be copied at nauseam for each instance of the GPIO block, which is > a waste of memory. > > My current approach is to add a new irq_chip flag (IRQCHIP_IMMUTABLE) > which does what it says on the tin: don't you dare writing to them. > Gpiolib is further updated not to install its own callbacks, and it > becomes the responsibility of the driver to call into the gpiolib when > required. This is similar to what we do for other subsystems such as > PCI-MSI. > > 5 drivers are updated to this new model: M1, QC, Tegra, pl061 and AMD > (as I actively use them) keeping a single irq_chip structure, marking > it const, and exposing the new flag. > > Nothing breaks, the volume of change is small, the memory usage goes > down and we have fewer callbacks that can be used as attack vectors. > What's not to love? > > Since there wasn't any objection in the previous round of review, I'm > going to take this series into -next to see if anything breaks at > scale. The series: Acked-by: Linus Walleij <linus.walleij@linaro.org> Bartosz: if you're happy with this can you apply it to an immutable branch from v5.18-rc1 and merge that into the GPIO for-next and then I can also pull that into pinctrl? Yours, Linus Walleij
On Fri, 22 Apr 2022 22:24:22 +0100, Linus Walleij <linus.walleij@linaro.org> wrote: > > On Tue, Apr 19, 2022 at 4:19 PM Marc Zyngier <maz@kernel.org> wrote: > > > This is a followup from [2]. > > > > I recently realised that the gpiolib play ugly tricks on the > > unsuspecting irq_chip structures by patching the callbacks. > > > > Not only this breaks when an irq_chip structure is made const (which > > really should be the default case), but it also forces this structure > > to be copied at nauseam for each instance of the GPIO block, which is > > a waste of memory. > > > > My current approach is to add a new irq_chip flag (IRQCHIP_IMMUTABLE) > > which does what it says on the tin: don't you dare writing to them. > > Gpiolib is further updated not to install its own callbacks, and it > > becomes the responsibility of the driver to call into the gpiolib when > > required. This is similar to what we do for other subsystems such as > > PCI-MSI. > > > > 5 drivers are updated to this new model: M1, QC, Tegra, pl061 and AMD > > (as I actively use them) keeping a single irq_chip structure, marking > > it const, and exposing the new flag. > > > > Nothing breaks, the volume of change is small, the memory usage goes > > down and we have fewer callbacks that can be used as attack vectors. > > What's not to love? > > > > Since there wasn't any objection in the previous round of review, I'm > > going to take this series into -next to see if anything breaks at > > scale. > > The series: > Acked-by: Linus Walleij <linus.walleij@linaro.org> > > Bartosz: if you're happy with this can you apply it to an immutable branch > from v5.18-rc1 and merge that into the GPIO for-next and then I can also > pull that into pinctrl? For what it is worth, I've pushed this branch into irqchip-next. You can pick it up from: https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gpio-immutable but I can also drop it from the irqchip tree. Just let me know. M.
On Sat, Apr 23, 2022 at 12:30 PM Marc Zyngier <maz@kernel.org> wrote: > > On Fri, 22 Apr 2022 22:24:22 +0100, > Linus Walleij <linus.walleij@linaro.org> wrote: > > > > On Tue, Apr 19, 2022 at 4:19 PM Marc Zyngier <maz@kernel.org> wrote: > > > > > This is a followup from [2]. > > > > > > I recently realised that the gpiolib play ugly tricks on the > > > unsuspecting irq_chip structures by patching the callbacks. > > > > > > Not only this breaks when an irq_chip structure is made const (which > > > really should be the default case), but it also forces this structure > > > to be copied at nauseam for each instance of the GPIO block, which is > > > a waste of memory. > > > > > > My current approach is to add a new irq_chip flag (IRQCHIP_IMMUTABLE) > > > which does what it says on the tin: don't you dare writing to them. > > > Gpiolib is further updated not to install its own callbacks, and it > > > becomes the responsibility of the driver to call into the gpiolib when > > > required. This is similar to what we do for other subsystems such as > > > PCI-MSI. > > > > > > 5 drivers are updated to this new model: M1, QC, Tegra, pl061 and AMD > > > (as I actively use them) keeping a single irq_chip structure, marking > > > it const, and exposing the new flag. > > > > > > Nothing breaks, the volume of change is small, the memory usage goes > > > down and we have fewer callbacks that can be used as attack vectors. > > > What's not to love? > > > > > > Since there wasn't any objection in the previous round of review, I'm > > > going to take this series into -next to see if anything breaks at > > > scale. > > > > The series: > > Acked-by: Linus Walleij <linus.walleij@linaro.org> > > > > Bartosz: if you're happy with this can you apply it to an immutable branch > > from v5.18-rc1 and merge that into the GPIO for-next and then I can also > > pull that into pinctrl? > > For what it is worth, I've pushed this branch into irqchip-next. > > You can pick it up from: > > https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gpio-immutable > > but I can also drop it from the irqchip tree. > > Just let me know. I would prefer it if it goes as is now and every stakeholder can just pull it. As far as my drivers are concerned I also want to convert them sooner than later, meaning I want to pull this into my little tree as well. Bart, Linus, would it be also preferable for you?
On Tue, Apr 26, 2022 at 12:25 PM Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > On Sat, Apr 23, 2022 at 12:30 PM Marc Zyngier <maz@kernel.org> wrote: > > You can pick it up from: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gpio-immutable > > > > but I can also drop it from the irqchip tree. > > > > Just let me know. Pulling that looks good to me. If Bartosz pulls this to the GPIO tree I will also pull it to pin control, I just want him to decide, because the impact is biggest on GPIO. > I would prefer it if it goes as is now and every stakeholder can just > pull it. As far as my drivers are concerned I also want to convert > them sooner than later, meaning I want to pull this into my little > tree as well. Bart, Linus, would it be also preferable for you? I'd say let's all three pull this branch, Bart? Yours, Linus Walleij
On Sat, Apr 23, 2022 at 12:30 PM Marc Zyngier <maz@kernel.org> wrote: > > Bartosz: if you're happy with this can you apply it to an immutable branch > > from v5.18-rc1 and merge that into the GPIO for-next and then I can also > > pull that into pinctrl? > > For what it is worth, I've pushed this branch into irqchip-next. > > You can pick it up from: > > https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gpio-immutable Bartosz are you pulling this? Most of the changes are in GPIO. Patches have started to arrive that go on top of these changes so would be nice to have it in both GPIO and pin control as a baseline. Yours, Linus Walleij
On Wed, 04 May 2022 22:21:51 +0100, Linus Walleij <linus.walleij@linaro.org> wrote: > > On Sat, Apr 23, 2022 at 12:30 PM Marc Zyngier <maz@kernel.org> wrote: > > > > Bartosz: if you're happy with this can you apply it to an immutable branch > > > from v5.18-rc1 and merge that into the GPIO for-next and then I can also > > > pull that into pinctrl? > > > > For what it is worth, I've pushed this branch into irqchip-next. > > > > You can pick it up from: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gpio-immutable > > Bartosz are you pulling this? Most of the changes are in GPIO. > Patches have started to arrive that go on top of these changes > so would be nice to have it in both GPIO and pin control as a > baseline. I'm happy to queue things on top of my series if that helps. M.
On Wed, May 4, 2022 at 11:22 PM Linus Walleij <linus.walleij@linaro.org> wrote: > > On Sat, Apr 23, 2022 at 12:30 PM Marc Zyngier <maz@kernel.org> wrote: > > > > Bartosz: if you're happy with this can you apply it to an immutable branch > > > from v5.18-rc1 and merge that into the GPIO for-next and then I can also > > > pull that into pinctrl? > > > > For what it is worth, I've pushed this branch into irqchip-next. > > > > You can pick it up from: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gpio-immutable > > Bartosz are you pulling this? Most of the changes are in GPIO. > Patches have started to arrive that go on top of these changes > so would be nice to have it in both GPIO and pin control as a > baseline. > > Yours, > Linus Walleij Yes! Sorry for the delay. Pulling now. Bart
On Thu, May 5, 2022 at 2:58 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote: > On Wed, May 4, 2022 at 11:22 PM Linus Walleij <linus.walleij@linaro.org> wrote: > > > > On Sat, Apr 23, 2022 at 12:30 PM Marc Zyngier <maz@kernel.org> wrote: > > > > > > Bartosz: if you're happy with this can you apply it to an immutable branch > > > > from v5.18-rc1 and merge that into the GPIO for-next and then I can also > > > > pull that into pinctrl? > > > > > > For what it is worth, I've pushed this branch into irqchip-next. > > > > > > You can pick it up from: > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gpio-immutable > > > > Bartosz are you pulling this? Most of the changes are in GPIO. > > Patches have started to arrive that go on top of these changes > > so would be nice to have it in both GPIO and pin control as a > > baseline. > > > > Yours, > > Linus Walleij > > Yes! Sorry for the delay. Pulling now. Excellent, pulled it into pincontrol as well. Yours, Linus Walleij
On Tue, Apr 19, 2022 at 03:18:36PM +0100, Marc Zyngier wrote: > This is a followup from [2]. > > I recently realised that the gpiolib play ugly tricks on the > unsuspecting irq_chip structures by patching the callbacks. > > Not only this breaks when an irq_chip structure is made const (which > really should be the default case), but it also forces this structure > to be copied at nauseam for each instance of the GPIO block, which is > a waste of memory. Is this brings us to the issue with IRQ chip name? The use case in my mind is the following: 1) we have two or more GPIO chips that supports IRQ; 2) the user registers two IRQs of the same (by number) pin on different chips; 3) cat /proc/interrupt will show 'my_gpio_chip XX', where XX is the number. So, do I understand correct current state of affairs? If so, we have to fix this to have any kind of ID added to the chip name that we can map /proc/interrupts output correctly. > My current approach is to add a new irq_chip flag (IRQCHIP_IMMUTABLE) > which does what it says on the tin: don't you dare writing to them. > Gpiolib is further updated not to install its own callbacks, and it > becomes the responsibility of the driver to call into the gpiolib when > required. This is similar to what we do for other subsystems such as > PCI-MSI. > > 5 drivers are updated to this new model: M1, QC, Tegra, pl061 and AMD > (as I actively use them) keeping a single irq_chip structure, marking > it const, and exposing the new flag. > > Nothing breaks, the volume of change is small, the memory usage goes > down and we have fewer callbacks that can be used as attack vectors. > What's not to love? > > Since there wasn't any objection in the previous round of review, I'm > going to take this series into -next to see if anything breaks at > scale.
On Thu, May 12, 2022 at 08:08:28PM +0300, Andy Shevchenko wrote: > On Tue, Apr 19, 2022 at 03:18:36PM +0100, Marc Zyngier wrote: > > This is a followup from [2]. > > > > I recently realised that the gpiolib play ugly tricks on the > > unsuspecting irq_chip structures by patching the callbacks. > > > > Not only this breaks when an irq_chip structure is made const (which > > really should be the default case), but it also forces this structure > > to be copied at nauseam for each instance of the GPIO block, which is > > a waste of memory. > > Is this brings us to the issue with IRQ chip name? > > The use case in my mind is the following: > 1) we have two or more GPIO chips that supports IRQ; > 2) the user registers two IRQs of the same (by number) pin on different chips; > 3) cat /proc/interrupt will show 'my_gpio_chip XX', where XX is the number. > > So, do I understand correct current state of affairs? > > If so, we have to fix this to have any kind of ID added to the chip name that > we can map /proc/interrupts output correctly. Hmm... Some drivers are using static names, some -- dynamically prepared (one way or another). Either way I think the ID is good to have if we still miss it.
On Thu, 12 May 2022 18:08:28 +0100, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Tue, Apr 19, 2022 at 03:18:36PM +0100, Marc Zyngier wrote: > > This is a followup from [2]. > > > > I recently realised that the gpiolib play ugly tricks on the > > unsuspecting irq_chip structures by patching the callbacks. > > > > Not only this breaks when an irq_chip structure is made const (which > > really should be the default case), but it also forces this structure > > to be copied at nauseam for each instance of the GPIO block, which is > > a waste of memory. > > Is this brings us to the issue with IRQ chip name? > > The use case in my mind is the following: > 1) we have two or more GPIO chips that supports IRQ; > 2) the user registers two IRQs of the same (by number) pin on different chips; > 3) cat /proc/interrupt will show 'my_gpio_chip XX', where XX is the number. /proc/interrupts isn't a dumping ground for debug information. Yes, some irqchips do that, and they have been fixed by providing the irq_print_chip callback, thus ensuring that the irq_chip structure is never written to. I would have loved to simply get rid of the variable string, but this is obviously ABI, and we can't break that. > So, do I understand correct current state of affairs? > > If so, we have to fix this to have any kind of ID added to the chip name that > we can map /proc/interrupts output correctly. This is already done. That's not an excuse to add more of those though. We already have the required infrastructure in debugfs, and that's where this sort of thing should happen. M.
On Thu, 12 May 2022 18:35:55 +0100, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Thu, May 12, 2022 at 08:08:28PM +0300, Andy Shevchenko wrote: > > On Tue, Apr 19, 2022 at 03:18:36PM +0100, Marc Zyngier wrote: > > > This is a followup from [2]. > > > > > > I recently realised that the gpiolib play ugly tricks on the > > > unsuspecting irq_chip structures by patching the callbacks. > > > > > > Not only this breaks when an irq_chip structure is made const (which > > > really should be the default case), but it also forces this structure > > > to be copied at nauseam for each instance of the GPIO block, which is > > > a waste of memory. > > > > Is this brings us to the issue with IRQ chip name? > > > > The use case in my mind is the following: > > 1) we have two or more GPIO chips that supports IRQ; > > 2) the user registers two IRQs of the same (by number) pin on different chips; > > 3) cat /proc/interrupt will show 'my_gpio_chip XX', where XX is the number. > > > > So, do I understand correct current state of affairs? > > > > If so, we have to fix this to have any kind of ID added to the chip name that > > we can map /proc/interrupts output correctly. > > Hmm... Some drivers are using static names, some -- dynamically > prepared (one way or another). Either way I think the ID is good to > have if we still miss it. No, this is a terrible idea. /proc/interrupts gives you a hint of which driver/subsystem deals with the interrupt. This isn't a source of topological information. /sys/kernel/debug/irq has all the information you can dream of, and much more. Just make use of it. M.
On Fri, May 13, 2022 at 12:18 AM Marc Zyngier <maz@kernel.org> wrote: > On Thu, 12 May 2022 18:35:55 +0100, > Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > > > On Thu, May 12, 2022 at 08:08:28PM +0300, Andy Shevchenko wrote: > > > On Tue, Apr 19, 2022 at 03:18:36PM +0100, Marc Zyngier wrote: > > > > This is a followup from [2]. > > > > > > > > I recently realised that the gpiolib play ugly tricks on the > > > > unsuspecting irq_chip structures by patching the callbacks. > > > > > > > > Not only this breaks when an irq_chip structure is made const (which > > > > really should be the default case), but it also forces this structure > > > > to be copied at nauseam for each instance of the GPIO block, which is > > > > a waste of memory. > > > > > > Is this brings us to the issue with IRQ chip name? > > > > > > The use case in my mind is the following: > > > 1) we have two or more GPIO chips that supports IRQ; > > > 2) the user registers two IRQs of the same (by number) pin on different chips; > > > 3) cat /proc/interrupt will show 'my_gpio_chip XX', where XX is the number. > > > > > > So, do I understand correct current state of affairs? > > > > > > If so, we have to fix this to have any kind of ID added to the chip name that > > > we can map /proc/interrupts output correctly. > > > > Hmm... Some drivers are using static names, some -- dynamically > > prepared (one way or another). Either way I think the ID is good to > > have if we still miss it. > > No, this is a terrible idea. /proc/interrupts gives you a hint of > which driver/subsystem deals with the interrupt. This isn't a source > of topological information. /sys/kernel/debug/irq has all the > information you can dream of, and much more. Just make use of it. Okay, so IIUC the mapping is that: I got a vIRQ number from /proc/interrupts, but then I have to mount debugfs and look into it for a detailed answer of which chip/domain this vIRQ belongs to. Also /sys/kernel/irq rings a bell, but not sure if it's related.
On Fri, 13 May 2022 09:43:29 +0100, Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Fri, May 13, 2022 at 12:18 AM Marc Zyngier <maz@kernel.org> wrote: > > On Thu, 12 May 2022 18:35:55 +0100, > > Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > > > > > On Thu, May 12, 2022 at 08:08:28PM +0300, Andy Shevchenko wrote: > > > > On Tue, Apr 19, 2022 at 03:18:36PM +0100, Marc Zyngier wrote: > > > > > This is a followup from [2]. > > > > > > > > > > I recently realised that the gpiolib play ugly tricks on the > > > > > unsuspecting irq_chip structures by patching the callbacks. > > > > > > > > > > Not only this breaks when an irq_chip structure is made const (which > > > > > really should be the default case), but it also forces this structure > > > > > to be copied at nauseam for each instance of the GPIO block, which is > > > > > a waste of memory. > > > > > > > > Is this brings us to the issue with IRQ chip name? > > > > > > > > The use case in my mind is the following: > > > > 1) we have two or more GPIO chips that supports IRQ; > > > > 2) the user registers two IRQs of the same (by number) pin on different chips; > > > > 3) cat /proc/interrupt will show 'my_gpio_chip XX', where XX is the number. > > > > > > > > So, do I understand correct current state of affairs? > > > > > > > > If so, we have to fix this to have any kind of ID added to the chip name that > > > > we can map /proc/interrupts output correctly. > > > > > > Hmm... Some drivers are using static names, some -- dynamically > > > prepared (one way or another). Either way I think the ID is good to > > > have if we still miss it. > > > > No, this is a terrible idea. /proc/interrupts gives you a hint of > > which driver/subsystem deals with the interrupt. This isn't a source > > of topological information. /sys/kernel/debug/irq has all the > > information you can dream of, and much more. Just make use of it. > > Okay, so IIUC the mapping is that: I got a vIRQ number from > /proc/interrupts, but then I have to mount debugfs and look into it > for a detailed answer of which chip/domain this vIRQ belongs to. Normal users shouldn't care about irqdomains. If you are developing, you already have debugfs enabled and mounted on your system. > Also /sys/kernel/irq rings a bell, but not sure if it's related. This is the same thing as /proc/interrupt, just dumped with a different format. M.