mbox series

[0/9] Configure GbEth for RGMII on RZ/G2L family

Message ID 20240524094603.988-1-paul.barker.ct@bp.renesas.com
Headers show
Series Configure GbEth for RGMII on RZ/G2L family | expand

Message

Paul Barker May 24, 2024, 9:45 a.m. UTC 
For devices in the RZ/G2L family, we have so far relied on U-Boot correctly
configuring the Ethernet interfaces in RGMII mode with PVDD=1.8V before the
kernel is booted. Instead, the required configuration should be described in the
device tree and activated within the pinctrl driver.

Paul Barker (9):
  pinctrl: renesas: rzg2l: Fix variable names in OEN functions
  pinctrl: renesas: rzg2l: Refactor pin to OEN bit translation
  pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
  arm64: dts: renesas: rzg2l: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V
  arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
  arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V

 .../boot/dts/renesas/rzg2l-smarc-som.dtsi     | 86 ++++++++++++-------
 .../boot/dts/renesas/rzg2lc-smarc-som.dtsi    | 43 ++++++----
 .../boot/dts/renesas/rzg2ul-smarc-som.dtsi    | 86 ++++++++++++-------
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 78 ++++++++++-------
 4 files changed, 182 insertions(+), 111 deletions(-)