diff mbox

gpio: bcm-kona: only use set_irq_flags() on ARM

Message ID 1379711820-10802-1-git-send-email-linus.walleij@linaro.org
State New
Headers show

Commit Message

Linus Walleij Sept. 20, 2013, 9:17 p.m. UTC
As per the pattern from other GPIO drivers, use set_irq_flags()
on ARM only, use irq_set_noprobe() on other archs.

Also rename the argument "virq" to just "irq", this IRQ isn't
any more "virtual" than any other Linux IRQ number, we use
"hwirq" for the actual hw-numbers, "virq" is just bogus.

Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 drivers/gpio/gpio-bcm-kona.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
diff mbox


diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index f7d932a..c0997cc 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -468,18 +468,22 @@  MODULE_DEVICE_TABLE(of, bcm_kona_gpio_of_match);
 static struct lock_class_key gpio_lock_class;
-static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
 				 irq_hw_number_t hwirq)
 	int ret;
-	ret = irq_set_chip_data(virq, d->host_data);
+	ret = irq_set_chip_data(irq, d->host_data);
 	if (ret < 0)
 		return ret;
-	irq_set_lockdep_class(virq, &gpio_lock_class);
-	irq_set_chip_and_handler(virq, &bcm_gpio_irq_chip, handle_simple_irq);
-	irq_set_nested_thread(virq, 1);
-	set_irq_flags(virq, IRQF_VALID);
+	irq_set_lockdep_class(irq, &gpio_lock_class);
+	irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
+	irq_set_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+	set_irq_flags(irq, IRQF_VALID);
+	irq_set_noprobe(irq);
 	return 0;