diff mbox series

[1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add output-{enable,disable} properties

Message ID 1631588246-4811-2-git-send-email-quic_subbaram@quicinc.com
State New
Headers show
Series pinctrl: qcom: spmi-gpio: Add support to enable/disable output | expand

Commit Message

Subbaraman Narayanamurthy Sept. 14, 2021, 2:57 a.m. UTC
Add support for the pinconf DT property output-enable, output-disable
so that output can be enabled/disabled.

Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 2 ++
 1 file changed, 2 insertions(+)

Comments

Linus Walleij Sept. 23, 2021, 9:34 p.m. UTC | #1
On Tue, Sep 14, 2021 at 4:57 AM Subbaraman Narayanamurthy
<quic_subbaram@quicinc.com> wrote:

> Add support for the pinconf DT property output-enable, output-disable

> so that output can be enabled/disabled.

>

> Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>


Both patches applied! Thanks!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 9bd01db..fa7c319 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -170,6 +170,8 @@  $defs:
       input-enable: true
       output-high: true
       output-low: true
+      output-enable: true
+      output-disable: true
       power-source: true
 
       qcom,drive-strength: