diff mbox series

[v6,1/5] firmware: qcom_scm: provide a read-modify-write function

Message ID 1680076012-10785-2-git-send-email-quic_mojha@quicinc.com
State Superseded
Headers show
Series Refactor to support multiple download mode | expand

Commit Message

Mukesh Ojha March 29, 2023, 7:46 a.m. UTC
It was realized by Srinivas K. that there is a need of
read-modify-write scm exported function so that it can
be used by multiple clients.

Let's introduce qcom_scm_io_update_field() which masks
out the bits and write the passed value to that
bit-offset. Subsequent patch will use this function.

Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
---
 drivers/firmware/qcom_scm.c            | 15 +++++++++++++++
 include/linux/firmware/qcom/qcom_scm.h |  2 ++
 2 files changed, 17 insertions(+)

Comments

Andy Shevchenko May 26, 2023, 10 p.m. UTC | #1
Wed, Mar 29, 2023 at 01:16:48PM +0530, Mukesh Ojha kirjoitti:
> It was realized by Srinivas K. that there is a need of
> read-modify-write scm exported function so that it can
> be used by multiple clients.
> 
> Let's introduce qcom_scm_io_update_field() which masks
> out the bits and write the passed value to that
> bit-offset. Subsequent patch will use this function.

...

> +	new = (old & ~mask) | val << (ffs(mask) - 1);

It's a bit non-standard to see left shift here instead of masking.

	new = (old & ~mask) | (val & mask);

is usual pattern.

Note as well that your code is prone to subtle mistakes when overflow may
easily override bits outside the mask.

> +	return qcom_scm_io_writel(addr, new);
> +}
diff mbox series

Patch

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 5f281cb..cb0bc32 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -407,6 +407,21 @@  int qcom_scm_set_remote_state(u32 state, u32 id)
 }
 EXPORT_SYMBOL(qcom_scm_set_remote_state);
 
+int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
+{
+	unsigned int old, new;
+	int ret;
+
+	ret = qcom_scm_io_readl(addr, &old);
+	if (ret)
+		return ret;
+
+	new = (old & ~mask) | val << (ffs(mask) - 1);
+
+	return qcom_scm_io_writel(addr, new);
+}
+EXPORT_SYMBOL(qcom_scm_io_update_field);
+
 static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
 {
 	struct qcom_scm_desc desc = {
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index 1e449a5..203a781 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -84,6 +84,8 @@  extern bool qcom_scm_pas_supported(u32 peripheral);
 
 extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
+extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask,
+				    unsigned int val);
 
 extern bool qcom_scm_restore_sec_cfg_available(void);
 extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);