From patchwork Fri Mar 9 05:13:42 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manivannan Sadhasivam X-Patchwork-Id: 131082 Delivered-To: patch@linaro.org Received: by 10.46.66.2 with SMTP id p2csp573501lja; Thu, 8 Mar 2018 21:15:38 -0800 (PST) X-Google-Smtp-Source: AG47ELvs/CyQyuBzCtS60aPniaSdA8jxK0M62S5EeOi5GnZbT7DuBE+lDwXSx/ZVWwVhwkRnhWGY X-Received: by 2002:a17:902:6bc9:: with SMTP id m9-v6mr21175897plt.421.1520572538127; Thu, 08 Mar 2018 21:15:38 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1520572538; cv=none; d=google.com; s=arc-20160816; b=IkoyQMFBlE63PNHfPplEQEQdsCnRr5p/kfCC4+JvB7DqYZTki6yxrvGrfmHTAqBwYU qx1hyzHnzMq0fAFWy50nBDe4NTviVJ9KT744quAoBn48RJazhRhFQ6r2Y1bEDaaLMNzh SdbitjIaRKYUpLAQXwAMQtCqPR1uKSLdznGd3BpVO8KmBErT6McmlXLBFKpZLrledEnl 2l1gks91wX7qP1QWawx8QwMsWIcXXlyF9skxQyS9TzlZ80CHpbXWi9lHXS1pFSoqGZnt s7aV4/9mHnI3UfEhQ2MWWn6MvlCg9ZnwbWlSARf0OvL6glzistLKAFXqIbNJi3OrJO/w spkQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature:arc-authentication-results; bh=2ng7dqB2yYZrXGsOtFv+cuRpdKJJUXCSTd4ddx1/fhc=; b=t1kGgD+TYC2mfE4tnDyJwSgMAuO2Kgaq1MJ1oxC3IVp5TcVdpIt1cHIT6m5oTrvpj/ 8OvqvMfpNQJ71043WLK0OAQC0Gpwo6eNrwzY8i5ZsMZNlqgN68vigHqObvDgneix6XVL g6DVBtAX3y3OfMtQSxa5gix/AVYPfaEx4BUt9Te25oDwdzgIDeAQME/yOGz8UcNfbzku GxoG+/9dOyPDNFFX9FV3idIIFjBI/NOWJB62dSbUET+lhfnlJETKPou8gIiMFv6ZAoRY KUxLMyGghLN79IF5XJ8fQ4yTM/ppwgvPVr8we3IPEMDZcJNxgmFhgcQgvTUJTBXPgvL/ N7SQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=BaePGlAL; spf=pass (google.com: best guess record for domain of linux-gpio-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-gpio-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id r65si258598pfa.79.2018.03.08.21.15.37; Thu, 08 Mar 2018 21:15:38 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-gpio-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=BaePGlAL; spf=pass (google.com: best guess record for domain of linux-gpio-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-gpio-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751857AbeCIFPg (ORCPT + 5 others); Fri, 9 Mar 2018 00:15:36 -0500 Received: from mail-pl0-f65.google.com ([209.85.160.65]:35338 "EHLO mail-pl0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751850AbeCIFPe (ORCPT ); Fri, 9 Mar 2018 00:15:34 -0500 Received: by mail-pl0-f65.google.com with SMTP id w22-v6so4691349pll.2 for ; Thu, 08 Mar 2018 21:15:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=DAyvRHnmrOLgarFJUokbvUyFzKZgg2aI3Ahg2Uz0rtQ=; b=BaePGlALIIfzxPB1eN3I2RBOiwfwKva8z0LI10jshjiGQ63rKYjpQzxF3C3dGmaX1S d7CLMdQOqKZ9vvdeHmI/vl83U0B9rqwwuqQOqS6SjCK07oGaXfwNm+jhgPJ5eAj83XDI lt00XcVFIgdQVPbqhalq3XY23KZVPK5x7GQds= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=DAyvRHnmrOLgarFJUokbvUyFzKZgg2aI3Ahg2Uz0rtQ=; b=uBEWx09h/ccOe5ubOb+llLUCvFKp+b/H+eOezBEWxuLDJpP81vqTIbOEuA7Lc99qjV bBbLp2NT9pngUXYWWmHAjQIcd9YnKVwS0ZX3NNyNT9zCp6ybAlWj30kJ3SCXwc8NMcLk VIwkXtcc7d9zeejnEpYLfuxB3tztLvLtwJtr8g5+B4En+4ThxL1zATAr57ngLsw0QA+l vlCUB1y+CW73WhsRYoNO0Utg+KEGfHwxLhy9isFeRb3zJ2FUwmQKAMuHhhDOdRV5up4y d+Jir3tQhD8eDV4pTfXu+HsCkBmVXXguJJHP5Mq1B6Nu0raulOs2C2QfB8RuTroipOvY QALg== X-Gm-Message-State: APf1xPDfe/Cu1VlJDwYLoQUZ7J5mwHaRqo6pV6ucXAG7nM5IkiZ8S1l+ narsY4DWYyn6PhtRXFYChujz X-Received: by 2002:a17:902:6909:: with SMTP id j9-v6mr25845381plk.447.1520572533370; Thu, 08 Mar 2018 21:15:33 -0800 (PST) Received: from localhost.localdomain ([2405:204:7081:af21:ac40:fc54:f562:4008]) by smtp.gmail.com with ESMTPSA id i186sm635182pfg.25.2018.03.08.21.15.24 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 08 Mar 2018 21:15:32 -0800 (PST) From: Manivannan Sadhasivam To: linus.walleij@linaro.org, robh+dt@kernel.org, afaerber@suse.de Cc: liuwei@actions-semi.com, mp-cs@actions-semi.com, 96boards@ucrobotics.com, devicetree@vger.kernel.org, andy.shevchenko@gmail.com, daniel.thompson@linaro.org, amit.kucheria@linaro.org, linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, hzhang@ucrobotics.com, bdong@ucrobotics.com, manivannanece23@gmail.com, Manivannan Sadhasivam Subject: [PATCH v5 6/9] arm64: dts: actions: Add gpio line names to Bubblegum-96 board Date: Fri, 9 Mar 2018 10:43:42 +0530 Message-Id: <20180309051345.1011-7-manivannan.sadhasivam@linaro.org> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20180309051345.1011-1-manivannan.sadhasivam@linaro.org> References: <20180309051345.1011-1-manivannan.sadhasivam@linaro.org> Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add gpio line names to Actions Semi S900 based Bubblegum-96 board. Signed-off-by: Manivannan Sadhasivam --- arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 195 ++++++++++++++++++++++ 1 file changed, 195 insertions(+) -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index ff043c961d75..02dbb4291d68 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -34,3 +34,198 @@ status = "okay"; clocks = <&cmu CLK_UART5>; }; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "Schematics Bubblegum96" + * version v1.0 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Boards naming of a line and the schematic name of + * the same line are in conflict, the 96Boards specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. Only exception is the I2C lines for which the schematic + * naming has been preferred. This is only for the informational + * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L" + * are the only ones actually used for GPIO. + */ + +&gpioa { + gpio-line-names = + "GPIO-A", /* GPIO_0, LSEC pin 23 */ + "GPIO-B", /* GPIO_1, LSEC pin 24 */ + "GPIO-C", /* GPIO_2, LSEC pin 25 */ + "GPIO-D", /* GPIO_3, LSEC pin 26 */ + "GPIO-E", /* GPIO_4, LSEC pin 27 */ + "GPIO-F", /* GPIO_5, LSEC pin 28 */ + "GPIO-G", /* GPIO_6, LSEC pin 29 */ + "GPIO-H", /* GPIO_7, LSEC pin 30 */ + "GPIO-I", /* GPIO_8, LSEC pin 31 */ + "GPIO-J", /* GPIO_9, LSEC pin 32 */ + "NC", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "SIRQ2_1V8", /* GPIO_12 */ + "PCM0_OUT", /* GPIO_13 */ + "WIFI_LED", /* GPIO_14 */ + "PCM0_SYNC", /* GPIO_15 */ + "PCM0_CLK", /* GPIO_16 */ + "PCM0_IN", /* GPIO_17 */ + "BT_LED", /* GPIO_18 */ + "LED0", /* GPIO_19 */ + "LED1", /* GPIO_20 */ + "JTAG_TCK", /* GPIO_21 */ + "JTAG_TMS", /* GPIO_22 */ + "JTAG_TDI", /* GPIO_23 */ + "JTAG_TDO", /* GPIO_24 */ + "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */ + "NC", /* GPIO_26 */ + "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */ + "SD0_D0", /* GPIO_28 */ + "SD0_D1", /* GPIO_29 */ + "SD0_D2", /* GPIO_30 */ + "SD0_D3"; /* GPIO_31 */ +}; + +&gpiob { + gpio-line-names = + "SD1_D0", /* GPIO_32 */ + "SD1_D1", /* GPIO_33 */ + "SD1_D2", /* GPIO_34 */ + "SD1_D3", /* GPIO_35 */ + "SD0_CMD", /* GPIO_36 */ + "SD0_CLK", /* GPIO_37 */ + "SD1_CMD", /* GPIO_38 */ + "SD1_CLK", /* GPIO_39 */ + "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */ + "SPI0_CS", /* GPIO_41, LSEC pin 12 */ + "SPI0_DIN", /* GPIO_42, LSEC pin 10 */ + "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */ + "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */ + "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */ + "UART0_RX", /* GPIO_46, LSEC pin 7 */ + "UART0_TX", /* GPIO_47, LSEC pin 5 */ + "UART0_RTSB", /* GPIO_48, LSEC pin 9 */ + "UART0_CTSB", /* GPIO_49, LSEC pin 3 */ + "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */ + "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */ + "I2C0_SCLK", /* GPIO_52 */ + "I2C0_SDATA", /* GPIO_53 */ + "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */ + "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */ + "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */ + "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */ + "CSI0_DN0", /* GPIO_58, HSEC pin 10 */ + "CSI0_DP0", /* GPIO_59, HSEC pin 8 */ + "CSI0_DN1", /* GPIO_60, HSEC pin 16 */ + "CSI0_DP1", /* GPIO_61, HSEC pin 14 */ + "CSI0_CN", /* GPIO_62, HSEC pin 4 */ + "CSI0_CP"; /* GPIO_63, HSEC pin 2 */ +}; + +&gpioc { + gpio-line-names = + "CSI0_DN2", /* GPIO_64, HSEC pin 22 */ + "CSI0_DP2", /* GPIO_65, HSEC pin 20 */ + "CSI0_DN3", /* GPIO_66, HSEC pin 28 */ + "CSI0_DP3", /* GPIO_67, HSEC pin 26 */ + "[CLK0]", /* GPIO_68, HSEC pin 15 */ + "CSI1_DN0", /* GPIO_69, HSEC pin 44 */ + "CSI1_DP0", /* GPIO_70, HSEC pin 42 */ + "CSI1_DN1", /* GPIO_71, HSEC pin 50 */ + "CSI1_DP1", /* GPIO_72, HSEC pin 48 */ + "CSI1_CN", /* GPIO_73, HSEC pin 56 */ + "CSI1_CP", /* GPIO_74, HSEC pin 54 */ + "[CLK1]"; /* GPIO_75, HSEC pin 17 */ +}; + +&gpiod { + gpio-line-names = + "[GPIOD0]", /* GPIO_76 */ + "[GPIOD1]", /* GPIO_77 */ + "BT_RST_N", /* GPIO_78 */ + "EXT_DC_EN", /* GPIO_79 */ + "[PCM_DI]", /* GPIO_80, LSEC pin 22 */ + "[PCM_DO]", /* GPIO_81, LSEC pin 20 */ + "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_83, LSEC pin 16 */ + "WAKE_BT", /* GPIO_84 */ + "WL_REG_ON", /* GPIO_85 */ + "NC", /* GPIO_86 */ + "NC", /* GPIO_87 */ + "NC", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "NC", /* GPIO_90 */ + "WIFI_WAKE", /* GPIO_91 */ + "BT_WAKE", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "OTG_EN2", /* GPIO_94 */ + "OTG_EN", /* GPIO_95 */ + "DSI_DP3", /* GPIO_96, HSEC pin 45 */ + "DSI_DN3", /* GPIO_97, HSEC pin 47 */ + "DSI_DP1", /* GPIO_98, HSEC pin 33 */ + "DSI_DN1", /* GPIO_99, HSEC pin 35 */ + "DSI_CP", /* GPIO_100, HSEC pin 21 */ + "DSI_CN", /* GPIO_101, HSEC pin 23 */ + "DSI_DP0", /* GPIO_102, HSEC pin 27 */ + "DSI_DN0", /* GPIO_103, HSEC pin 29 */ + "DSI_DP2", /* GPIO_104, HSEC pin 39 */ + "DSI_DN2"; /* GPIO_105, HSEC pin 41 */ +}; + +&gpioe { + gpio-line-names = + "N0_D0", /* GPIO_106 */ + "N0_D1", /* GPIO_107 */ + "N0_D2", /* GPIO_108 */ + "N0_D3", /* GPIO_109 */ + "N0_D4", /* GPIO_110 */ + "N0_D5", /* GPIO_111 */ + "N0_D6", /* GPIO_112 */ + "N0_D7", /* GPIO_113 */ + "N0_DQS", /* GPIO_114 */ + "N0_DQSN", /* GPIO_115 */ + "NC", /* GPIO_116 */ + "NC", /* GPIO_117 */ + "NC", /* GPIO_118 */ + "N0_CEB1", /* GPIO_119 */ + "CARD_DT", /* GPIO_120 */ + "N0_CEB3", /* GPIO_121 */ + "SD_DAT0", /* GPIO_122, HSEC pin 1 */ + "SD_DAT1", /* GPIO_123, HSEC pin 3 */ + "SD_DAT2", /* GPIO_124, HSEC pin 5 */ + "SD_DAT3", /* GPIO_125, HSEC pin 7 */ + "NC", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */ + "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */ + "NC", /* GPIO_130 */ + "SD_CMD", /* GPIO_131 */ + "GPIO-L", /* GPIO_132, LSEC pin 34 */ + "GPIO-K", /* GPIO_133, LSEC pin 33 */ + "NC", /* GPIO_134 */ + "SD_SCLK", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "JTAG_TRST"; /* GPIO_137 */ +}; + +&gpiof { + gpio-line-names = + "I2C3_SCLK", /* GPIO_138 */ + "LED2", /* GPIO_139 */ + "LED3", /* GPIO_140 */ + "I2C3_SDATA", /* GPIO_141 */ + "UART3_RX", /* GPIO_142 */ + "UART3_TX", /* GPIO_143 */ + "UART3_RTSB", /* GPIO_144 */ + "UART3_CTSB"; /* GPIO_145 */ +};