diff mbox series

[1/5] dt-bindings: i2c: Add binding for Actions Semi OWL I2C controller

Message ID 20180623161147.15672-2-manivannan.sadhasivam@linaro.org
State Superseded
Headers show
Series [1/5] dt-bindings: i2c: Add binding for Actions Semi OWL I2C controller | expand

Commit Message

Manivannan Sadhasivam June 23, 2018, 4:11 p.m. UTC 
Add devicetree binding for Actions Semi OWL I2C controller

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 .../devicetree/bindings/i2c/i2c-owl.txt       | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.txt

-- 
2.17.1

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.txt b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
new file mode 100644
index 000000000000..9b691968cffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
@@ -0,0 +1,27 @@ 
+OWL I2C controller
+
+Required properties:
+
+- compatible        : Should be "actions,s900-i2c".
+- reg               : Offset and length of the register set for the device.
+- #address-cells    : Should be 1.
+- #size-cells       : Should be 0.
+- interrupts        : A single interrupt specifier.
+- clocks            : Phandle of the clock feeding the I2C controller.
+
+Optional properties:
+
+- clock-frequency   : Desired I2C bus clock frequency in Hz. As only Normal and
+                      Fast modes are supported, possible values are 100000 and
+                      400000.
+Examples:
+
+        i2c0: i2c@e0170000 {
+                compatible = "actions,s900-i2c";
+                reg = <0 0xe0170000 0 0x1000>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clock CLK_I2C0>;
+                clock-frequency = <100000>;
+        };