diff mbox series

[v7,13/13] arm64: defconfig: enable the sl28cpld board management controller

Message ID 20200803093559.12289-14-michael@walle.cc
State New
Headers show
Series [v7,01/13] mfd: add simple regmap based I2C driver | expand

Commit Message

Michael Walle Aug. 3, 2020, 9:35 a.m. UTC
Enable the kernel modules for the board management controller "sl28cpld"
which is used on the SMARC-sAL28 board.

Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v6:
 - none

Changes since v5:
 - new patch

 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 500b782b92df..dd1a8b9856b5 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -500,6 +500,7 @@  CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
+CONFIG_GPIO_SL28CPLD=m
 CONFIG_POWER_AVS=y
 CONFIG_QCOM_CPR=y
 CONFIG_ROCKCHIP_IODOMAIN=y
@@ -513,6 +514,7 @@  CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
+CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
@@ -535,6 +537,7 @@  CONFIG_QCOM_TSENS=y
 CONFIG_QCOM_SPMI_TEMP_ALARM=m
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_WATCHDOG=y
+CONFIG_SL28CPLD_WATCHDOG=m
 CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_ARM_SMC_WATCHDOG=y
@@ -935,8 +938,10 @@  CONFIG_PWM_MESON=m
 CONFIG_PWM_RCAR=m
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_SL28CPLD=m
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_SL28CPLD_INTC=y
 CONFIG_QCOM_PDC=y
 CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m