From patchwork Wed Dec 9 05:34:54 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Damien Le Moal X-Patchwork-Id: 340596 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.5 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 022AEC19425 for ; Wed, 9 Dec 2020 05:38:16 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id CCC6E23AFE for ; Wed, 9 Dec 2020 05:38:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727774AbgLIFiO (ORCPT ); Wed, 9 Dec 2020 00:38:14 -0500 Received: from esa4.hgst.iphmx.com ([216.71.154.42]:15290 "EHLO esa4.hgst.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727771AbgLIFiJ (ORCPT ); Wed, 9 Dec 2020 00:38:09 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=wdc.com; i=@wdc.com; q=dns/txt; s=dkim.wdc.com; t=1607492286; x=1639028286; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=V2xB2SB8lv6Aw9YkubyQDVNa1bzqAGS3bq1UPeXwDbw=; b=eOL3f6/NBhUr/cxCsEO3e3yCbEzsGn4CBlVvSazWliV0qG257hZwQM5/ LZiro6pTxOH0ELlzS1j0i4mX4ruhCNy/wQmDFEkGjaB9zwZ9aSA2Higok khfWnKTXbFiqLQ3oI0jqncJlyiB0jsGMdX1pJWpyHaLE54N/I92iIyu/+ tDrLyELlFK+hdLxAZ6I+5dDEavwwoO5hIwtR9Sbs3mKxNlFDFhLaV2Ab0 W7MxEI6bwnraHZ9azfiaaoORdE7RFO3Xz+K20U7FgNJ9pgb5WYWb+gdUK RSJHllaMFnjQs2iEWqTZGGlykEgqJY8oxNFbH1l0ya7C7NlsVoO6YJays w==; IronPort-SDR: 9rvazJeRsTu4cHfI88ZaAAjK2FSs4RZhFQ8tctTezxZqvGTb6E9QsedMnpFGmawTsaqNCzjQ0W AzEGGzmkReoIvfJ4bbyWSJ758W15PJKHElL9HfVK36iCgyxrqqiCpqkn6I5dVKUCaMyikuIu4m b60aOrBrNvha/orZmFRYsMMitqJZVZPQ1KUZNOvduMoMFZ13NJm+ZdMBTmCjFTDI+GyljEyCi/ N7ghZsiuSrtGeCCgJSDUwWw1Y9BUtdS+E3nzlFwcEMEXNTEJW7Y/DPKciM3soG4xRdFyUg22JJ 13k= X-IronPort-AV: E=Sophos;i="5.78,404,1599494400"; d="scan'208";a="154735902" Received: from h199-255-45-14.hgst.com (HELO uls-op-cesaep01.wdc.com) ([199.255.45.14]) by ob1.hgst.iphmx.com with ESMTP; 09 Dec 2020 13:35:31 +0800 IronPort-SDR: 5YJnPjdxvi/MwgFx/YMz1vwohtjcopk52FbJlaTuTS7UKC+qUSdHrX4ba6Mf5WCMzGZhfYx8DB fY+uZNmUbF8dxA+46IdNTFd5M1XddtKjk= Received: from uls-op-cesaip02.wdc.com ([10.248.3.37]) by uls-op-cesaep01.wdc.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 08 Dec 2020 21:20:58 -0800 IronPort-SDR: S/k0RWhMyTTh/HLBBRrVIxMXwEDwORz9UDth0VQj+8OXztPniVO/JeeYHUH1FhGrWQTjiWMhWX 5jojgjLMH0JQ== WDCIronportException: Internal Received: from wdapacbjl0003.my.asia.wdc.com (HELO twashi.fujisawa.hgst.com) ([10.84.71.173]) by uls-op-cesaip02.wdc.com with ESMTP; 08 Dec 2020 21:35:29 -0800 From: Damien Le Moal To: Palmer Dabbelt , linux-riscv@lists.infradead.org, Rob Herring , devicetree@vger.kernel.org, Stephen Boyd , linux-clk@vger.kernel.org, Linus Walleij , linux-gpio@vger.kernel.org, Philipp Zabel Cc: Sean Anderson Subject: [PATCH v6 10/22] dt-bindings: pinctrl: Document canaan, k210-fpioa bindings Date: Wed, 9 Dec 2020 14:34:54 +0900 Message-Id: <20201209053506.122582-11-damien.lemoal@wdc.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201209053506.122582-1-damien.lemoal@wdc.com> References: <20201209053506.122582-1-damien.lemoal@wdc.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Document the device tree bindings for the Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) pinctrl driver in Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml. The new header file include/dt-bindings/pinctrl/k210-fpioa.h is added to define all 256 possible pin functions of the SoC IO pins, as well as macros simplifying the definition of pin functions in a device tree. Signed-off-by: Damien Le Moal --- .../bindings/pinctrl/canaan,k210-fpioa.yaml | 171 +++++++++++ include/dt-bindings/pinctrl/k210-fpioa.h | 276 ++++++++++++++++++ 2 files changed, 447 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml create mode 100644 include/dt-bindings/pinctrl/k210-fpioa.h diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml new file mode 100644 index 000000000000..30b850c3bf2b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan Kendryte K210 FPIOA Device Tree Bindings + +maintainers: + - Damien Le Moal + +description: + The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) + controller allows assiging any of 256 possible functions to any of + 48 IO pins of the SoC. Pin function configuration is performed on + a per-pin basis. + +properties: + compatible: + const: canaan,k210-fpioa + + reg: + maxItems: 1 + description: + Address and length of the register set for the FPIOA controller. + + clocks: + items: + - description: Controller reference clock source + - description: APB interface clock source + + clock-names: + items: + - const: ref + - const: pclk + + resets: + maxItems: 1 + + canaan,k210-sysctl-power: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + phandle of the K210 system controller node and offset of its + power domain control register. + +patternProperties: + '-pinmux$': + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml + description: + FPIOA client devices use sub-nodes to define the desired pin + configuration. Client device sub-nodes use the pinux property + below. + + properties: + pinmux: + description: + List of IO pins alternate functions. The values for each IO + pin is a combination of an IO pin number (0 to 47) with the + desired function for the IO pin. Functions are defined as + macros in include/dt-bindings/pinctrl/k210-fpioa.h. + The K210_FPIOA(IO pin, function) macro is provided to + facilitate the combination of IO pin numbers and functions. + + required: + - pinmux + + additionalProperties: false + + '-pins$': + type: object + $ref: /schemas/pinctrl/pincfg-node.yaml + description: + FPIOA client devices use sub-nodes to define the desired + configuration of pins. Client device sub-nodes use the + properties below. + + properties: + pins: + description: + List of IO pins affected by the properties specified in this + subnode. IO pins are identified using the pin names "IO_xx". + Pin configuration nodes can also define the power domain to + be used for the SoC pin groups A0 (IO pins 0-5), + A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23), + B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35), + C0 (IO pins 36-41) and C1 (IO pins 42-47) using the + power-source property. + items: + anyOf: + - pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$" + - enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7, + IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14, + IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21, + IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28, + IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35, + IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42, + IO_43, IO_44, IO_45, IO_46, IO_47, + A0, A1, A2, B3, B4, B5, C6, C7 ] + bias-disable: true + + bias-pull-down: true + + bias-pull-up: true + + drive-strength: true + + drive-strength-microamp: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + intput-polarity-invert: + description: + Enable or disable pin input polarity inversion. + + output-enable: true + + output-disable: true + + output-high: true + + output-low: true + + output-polarity-invert: + description: + Enable or disable pin output polarity inversion. + + slew-rate: true + + power-source: true + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - canaan,k210-sysctl-power + +additionalProperties: false + +examples: + - | + #include + #include + #include + + fpioa: pinmux@502B0000 { + compatible = "canaan,k210-fpioa"; + reg = <0x502B0000 0x100>; + clocks = <&sysclk K210_CLK_FPIOA>, + <&sysclk K210_CLK_APB0>; + clock-names = "ref", "pclk"; + resets = <&sysrst K210_RST_FPIOA>; + canaan,k210-sysctl-power = <&sysctl 108>; + pinctrl-0 = <&jtag_pinctrl>; + pinctrl-names = "default"; + + jtag_pinctrl: jtag-pinmux { + pinmux = , + , + , + ; + }; + }; diff --git a/include/dt-bindings/pinctrl/k210-fpioa.h b/include/dt-bindings/pinctrl/k210-fpioa.h new file mode 100644 index 000000000000..314285eab3a1 --- /dev/null +++ b/include/dt-bindings/pinctrl/k210-fpioa.h @@ -0,0 +1,276 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2020 Sean Anderson + * Copyright (c) 2020 Western Digital Corporation or its affiliates. + */ +#ifndef PINCTRL_K210_FPIOA_H +#define PINCTRL_K210_FPIOA_H + +/* + * Full list of FPIOA functions from + * kendryte-standalone-sdk/lib/drivers/include/fpioa.h + */ +#define K210_PCF_MASK GENMASK(7, 0) +#define K210_PCF_JTAG_TCLK 0 /* JTAG Test Clock */ +#define K210_PCF_JTAG_TDI 1 /* JTAG Test Data In */ +#define K210_PCF_JTAG_TMS 2 /* JTAG Test Mode Select */ +#define K210_PCF_JTAG_TDO 3 /* JTAG Test Data Out */ +#define K210_PCF_SPI0_D0 4 /* SPI0 Data 0 */ +#define K210_PCF_SPI0_D1 5 /* SPI0 Data 1 */ +#define K210_PCF_SPI0_D2 6 /* SPI0 Data 2 */ +#define K210_PCF_SPI0_D3 7 /* SPI0 Data 3 */ +#define K210_PCF_SPI0_D4 8 /* SPI0 Data 4 */ +#define K210_PCF_SPI0_D5 9 /* SPI0 Data 5 */ +#define K210_PCF_SPI0_D6 10 /* SPI0 Data 6 */ +#define K210_PCF_SPI0_D7 11 /* SPI0 Data 7 */ +#define K210_PCF_SPI0_SS0 12 /* SPI0 Chip Select 0 */ +#define K210_PCF_SPI0_SS1 13 /* SPI0 Chip Select 1 */ +#define K210_PCF_SPI0_SS2 14 /* SPI0 Chip Select 2 */ +#define K210_PCF_SPI0_SS3 15 /* SPI0 Chip Select 3 */ +#define K210_PCF_SPI0_ARB 16 /* SPI0 Arbitration */ +#define K210_PCF_SPI0_SCLK 17 /* SPI0 Serial Clock */ +#define K210_PCF_UARTHS_RX 18 /* UART High speed Receiver */ +#define K210_PCF_UARTHS_TX 19 /* UART High speed Transmitter */ +#define K210_PCF_RESV6 20 /* Reserved function */ +#define K210_PCF_RESV7 21 /* Reserved function */ +#define K210_PCF_CLK_SPI1 22 /* Clock SPI1 */ +#define K210_PCF_CLK_I2C1 23 /* Clock I2C1 */ +#define K210_PCF_GPIOHS0 24 /* GPIO High speed 0 */ +#define K210_PCF_GPIOHS1 25 /* GPIO High speed 1 */ +#define K210_PCF_GPIOHS2 26 /* GPIO High speed 2 */ +#define K210_PCF_GPIOHS3 27 /* GPIO High speed 3 */ +#define K210_PCF_GPIOHS4 28 /* GPIO High speed 4 */ +#define K210_PCF_GPIOHS5 29 /* GPIO High speed 5 */ +#define K210_PCF_GPIOHS6 30 /* GPIO High speed 6 */ +#define K210_PCF_GPIOHS7 31 /* GPIO High speed 7 */ +#define K210_PCF_GPIOHS8 32 /* GPIO High speed 8 */ +#define K210_PCF_GPIOHS9 33 /* GPIO High speed 9 */ +#define K210_PCF_GPIOHS10 34 /* GPIO High speed 10 */ +#define K210_PCF_GPIOHS11 35 /* GPIO High speed 11 */ +#define K210_PCF_GPIOHS12 36 /* GPIO High speed 12 */ +#define K210_PCF_GPIOHS13 37 /* GPIO High speed 13 */ +#define K210_PCF_GPIOHS14 38 /* GPIO High speed 14 */ +#define K210_PCF_GPIOHS15 39 /* GPIO High speed 15 */ +#define K210_PCF_GPIOHS16 40 /* GPIO High speed 16 */ +#define K210_PCF_GPIOHS17 41 /* GPIO High speed 17 */ +#define K210_PCF_GPIOHS18 42 /* GPIO High speed 18 */ +#define K210_PCF_GPIOHS19 43 /* GPIO High speed 19 */ +#define K210_PCF_GPIOHS20 44 /* GPIO High speed 20 */ +#define K210_PCF_GPIOHS21 45 /* GPIO High speed 21 */ +#define K210_PCF_GPIOHS22 46 /* GPIO High speed 22 */ +#define K210_PCF_GPIOHS23 47 /* GPIO High speed 23 */ +#define K210_PCF_GPIOHS24 48 /* GPIO High speed 24 */ +#define K210_PCF_GPIOHS25 49 /* GPIO High speed 25 */ +#define K210_PCF_GPIOHS26 50 /* GPIO High speed 26 */ +#define K210_PCF_GPIOHS27 51 /* GPIO High speed 27 */ +#define K210_PCF_GPIOHS28 52 /* GPIO High speed 28 */ +#define K210_PCF_GPIOHS29 53 /* GPIO High speed 29 */ +#define K210_PCF_GPIOHS30 54 /* GPIO High speed 30 */ +#define K210_PCF_GPIOHS31 55 /* GPIO High speed 31 */ +#define K210_PCF_GPIO0 56 /* GPIO pin 0 */ +#define K210_PCF_GPIO1 57 /* GPIO pin 1 */ +#define K210_PCF_GPIO2 58 /* GPIO pin 2 */ +#define K210_PCF_GPIO3 59 /* GPIO pin 3 */ +#define K210_PCF_GPIO4 60 /* GPIO pin 4 */ +#define K210_PCF_GPIO5 61 /* GPIO pin 5 */ +#define K210_PCF_GPIO6 62 /* GPIO pin 6 */ +#define K210_PCF_GPIO7 63 /* GPIO pin 7 */ +#define K210_PCF_UART1_RX 64 /* UART1 Receiver */ +#define K210_PCF_UART1_TX 65 /* UART1 Transmitter */ +#define K210_PCF_UART2_RX 66 /* UART2 Receiver */ +#define K210_PCF_UART2_TX 67 /* UART2 Transmitter */ +#define K210_PCF_UART3_RX 68 /* UART3 Receiver */ +#define K210_PCF_UART3_TX 69 /* UART3 Transmitter */ +#define K210_PCF_SPI1_D0 70 /* SPI1 Data 0 */ +#define K210_PCF_SPI1_D1 71 /* SPI1 Data 1 */ +#define K210_PCF_SPI1_D2 72 /* SPI1 Data 2 */ +#define K210_PCF_SPI1_D3 73 /* SPI1 Data 3 */ +#define K210_PCF_SPI1_D4 74 /* SPI1 Data 4 */ +#define K210_PCF_SPI1_D5 75 /* SPI1 Data 5 */ +#define K210_PCF_SPI1_D6 76 /* SPI1 Data 6 */ +#define K210_PCF_SPI1_D7 77 /* SPI1 Data 7 */ +#define K210_PCF_SPI1_SS0 78 /* SPI1 Chip Select 0 */ +#define K210_PCF_SPI1_SS1 79 /* SPI1 Chip Select 1 */ +#define K210_PCF_SPI1_SS2 80 /* SPI1 Chip Select 2 */ +#define K210_PCF_SPI1_SS3 81 /* SPI1 Chip Select 3 */ +#define K210_PCF_SPI1_ARB 82 /* SPI1 Arbitration */ +#define K210_PCF_SPI1_SCLK 83 /* SPI1 Serial Clock */ +#define K210_PCF_SPI2_D0 84 /* SPI2 Data 0 */ +#define K210_PCF_SPI2_SS 85 /* SPI2 Select */ +#define K210_PCF_SPI2_SCLK 86 /* SPI2 Serial Clock */ +#define K210_PCF_I2S0_MCLK 87 /* I2S0 Master Clock */ +#define K210_PCF_I2S0_SCLK 88 /* I2S0 Serial Clock(BCLK) */ +#define K210_PCF_I2S0_WS 89 /* I2S0 Word Select(LRCLK) */ +#define K210_PCF_I2S0_IN_D0 90 /* I2S0 Serial Data Input 0 */ +#define K210_PCF_I2S0_IN_D1 91 /* I2S0 Serial Data Input 1 */ +#define K210_PCF_I2S0_IN_D2 92 /* I2S0 Serial Data Input 2 */ +#define K210_PCF_I2S0_IN_D3 93 /* I2S0 Serial Data Input 3 */ +#define K210_PCF_I2S0_OUT_D0 94 /* I2S0 Serial Data Output 0 */ +#define K210_PCF_I2S0_OUT_D1 95 /* I2S0 Serial Data Output 1 */ +#define K210_PCF_I2S0_OUT_D2 96 /* I2S0 Serial Data Output 2 */ +#define K210_PCF_I2S0_OUT_D3 97 /* I2S0 Serial Data Output 3 */ +#define K210_PCF_I2S1_MCLK 98 /* I2S1 Master Clock */ +#define K210_PCF_I2S1_SCLK 99 /* I2S1 Serial Clock(BCLK) */ +#define K210_PCF_I2S1_WS 100 /* I2S1 Word Select(LRCLK) */ +#define K210_PCF_I2S1_IN_D0 101 /* I2S1 Serial Data Input 0 */ +#define K210_PCF_I2S1_IN_D1 102 /* I2S1 Serial Data Input 1 */ +#define K210_PCF_I2S1_IN_D2 103 /* I2S1 Serial Data Input 2 */ +#define K210_PCF_I2S1_IN_D3 104 /* I2S1 Serial Data Input 3 */ +#define K210_PCF_I2S1_OUT_D0 105 /* I2S1 Serial Data Output 0 */ +#define K210_PCF_I2S1_OUT_D1 106 /* I2S1 Serial Data Output 1 */ +#define K210_PCF_I2S1_OUT_D2 107 /* I2S1 Serial Data Output 2 */ +#define K210_PCF_I2S1_OUT_D3 108 /* I2S1 Serial Data Output 3 */ +#define K210_PCF_I2S2_MCLK 109 /* I2S2 Master Clock */ +#define K210_PCF_I2S2_SCLK 110 /* I2S2 Serial Clock(BCLK) */ +#define K210_PCF_I2S2_WS 111 /* I2S2 Word Select(LRCLK) */ +#define K210_PCF_I2S2_IN_D0 112 /* I2S2 Serial Data Input 0 */ +#define K210_PCF_I2S2_IN_D1 113 /* I2S2 Serial Data Input 1 */ +#define K210_PCF_I2S2_IN_D2 114 /* I2S2 Serial Data Input 2 */ +#define K210_PCF_I2S2_IN_D3 115 /* I2S2 Serial Data Input 3 */ +#define K210_PCF_I2S2_OUT_D0 116 /* I2S2 Serial Data Output 0 */ +#define K210_PCF_I2S2_OUT_D1 117 /* I2S2 Serial Data Output 1 */ +#define K210_PCF_I2S2_OUT_D2 118 /* I2S2 Serial Data Output 2 */ +#define K210_PCF_I2S2_OUT_D3 119 /* I2S2 Serial Data Output 3 */ +#define K210_PCF_RESV0 120 /* Reserved function */ +#define K210_PCF_RESV1 121 /* Reserved function */ +#define K210_PCF_RESV2 122 /* Reserved function */ +#define K210_PCF_RESV3 123 /* Reserved function */ +#define K210_PCF_RESV4 124 /* Reserved function */ +#define K210_PCF_RESV5 125 /* Reserved function */ +#define K210_PCF_I2C0_SCLK 126 /* I2C0 Serial Clock */ +#define K210_PCF_I2C0_SDA 127 /* I2C0 Serial Data */ +#define K210_PCF_I2C1_SCLK 128 /* I2C1 Serial Clock */ +#define K210_PCF_I2C1_SDA 129 /* I2C1 Serial Data */ +#define K210_PCF_I2C2_SCLK 130 /* I2C2 Serial Clock */ +#define K210_PCF_I2C2_SDA 131 /* I2C2 Serial Data */ +#define K210_PCF_DVP_XCLK 132 /* DVP System Clock */ +#define K210_PCF_DVP_RST 133 /* DVP System Reset */ +#define K210_PCF_DVP_PWDN 134 /* DVP Power Down Mode */ +#define K210_PCF_DVP_VSYNC 135 /* DVP Vertical Sync */ +#define K210_PCF_DVP_HSYNC 136 /* DVP Horizontal Sync */ +#define K210_PCF_DVP_PCLK 137 /* Pixel Clock */ +#define K210_PCF_DVP_D0 138 /* Data Bit 0 */ +#define K210_PCF_DVP_D1 139 /* Data Bit 1 */ +#define K210_PCF_DVP_D2 140 /* Data Bit 2 */ +#define K210_PCF_DVP_D3 141 /* Data Bit 3 */ +#define K210_PCF_DVP_D4 142 /* Data Bit 4 */ +#define K210_PCF_DVP_D5 143 /* Data Bit 5 */ +#define K210_PCF_DVP_D6 144 /* Data Bit 6 */ +#define K210_PCF_DVP_D7 145 /* Data Bit 7 */ +#define K210_PCF_SCCB_SCLK 146 /* Serial Camera Control Bus Clock */ +#define K210_PCF_SCCB_SDA 147 /* Serial Camera Control Bus Data */ +#define K210_PCF_UART1_CTS 148 /* UART1 Clear To Send */ +#define K210_PCF_UART1_DSR 149 /* UART1 Data Set Ready */ +#define K210_PCF_UART1_DCD 150 /* UART1 Data Carrier Detect */ +#define K210_PCF_UART1_RI 151 /* UART1 Ring Indicator */ +#define K210_PCF_UART1_SIR_IN 152 /* UART1 Serial Infrared Input */ +#define K210_PCF_UART1_DTR 153 /* UART1 Data Terminal Ready */ +#define K210_PCF_UART1_RTS 154 /* UART1 Request To Send */ +#define K210_PCF_UART1_OUT2 155 /* UART1 User-designated Output 2 */ +#define K210_PCF_UART1_OUT1 156 /* UART1 User-designated Output 1 */ +#define K210_PCF_UART1_SIR_OUT 157 /* UART1 Serial Infrared Output */ +#define K210_PCF_UART1_BAUD 158 /* UART1 Transmit Clock Output */ +#define K210_PCF_UART1_RE 159 /* UART1 Receiver Output Enable */ +#define K210_PCF_UART1_DE 160 /* UART1 Driver Output Enable */ +#define K210_PCF_UART1_RS485_EN 161 /* UART1 RS485 Enable */ +#define K210_PCF_UART2_CTS 162 /* UART2 Clear To Send */ +#define K210_PCF_UART2_DSR 163 /* UART2 Data Set Ready */ +#define K210_PCF_UART2_DCD 164 /* UART2 Data Carrier Detect */ +#define K210_PCF_UART2_RI 165 /* UART2 Ring Indicator */ +#define K210_PCF_UART2_SIR_IN 166 /* UART2 Serial Infrared Input */ +#define K210_PCF_UART2_DTR 167 /* UART2 Data Terminal Ready */ +#define K210_PCF_UART2_RTS 168 /* UART2 Request To Send */ +#define K210_PCF_UART2_OUT2 169 /* UART2 User-designated Output 2 */ +#define K210_PCF_UART2_OUT1 170 /* UART2 User-designated Output 1 */ +#define K210_PCF_UART2_SIR_OUT 171 /* UART2 Serial Infrared Output */ +#define K210_PCF_UART2_BAUD 172 /* UART2 Transmit Clock Output */ +#define K210_PCF_UART2_RE 173 /* UART2 Receiver Output Enable */ +#define K210_PCF_UART2_DE 174 /* UART2 Driver Output Enable */ +#define K210_PCF_UART2_RS485_EN 175 /* UART2 RS485 Enable */ +#define K210_PCF_UART3_CTS 176 /* UART3 Clear To Send */ +#define K210_PCF_UART3_DSR 177 /* UART3 Data Set Ready */ +#define K210_PCF_UART3_DCD 178 /* UART3 Data Carrier Detect */ +#define K210_PCF_UART3_RI 179 /* UART3 Ring Indicator */ +#define K210_PCF_UART3_SIR_IN 180 /* UART3 Serial Infrared Input */ +#define K210_PCF_UART3_DTR 181 /* UART3 Data Terminal Ready */ +#define K210_PCF_UART3_RTS 182 /* UART3 Request To Send */ +#define K210_PCF_UART3_OUT2 183 /* UART3 User-designated Output 2 */ +#define K210_PCF_UART3_OUT1 184 /* UART3 User-designated Output 1 */ +#define K210_PCF_UART3_SIR_OUT 185 /* UART3 Serial Infrared Output */ +#define K210_PCF_UART3_BAUD 186 /* UART3 Transmit Clock Output */ +#define K210_PCF_UART3_RE 187 /* UART3 Receiver Output Enable */ +#define K210_PCF_UART3_DE 188 /* UART3 Driver Output Enable */ +#define K210_PCF_UART3_RS485_EN 189 /* UART3 RS485 Enable */ +#define K210_PCF_TIMER0_TOGGLE1 190 /* TIMER0 Toggle Output 1 */ +#define K210_PCF_TIMER0_TOGGLE2 191 /* TIMER0 Toggle Output 2 */ +#define K210_PCF_TIMER0_TOGGLE3 192 /* TIMER0 Toggle Output 3 */ +#define K210_PCF_TIMER0_TOGGLE4 193 /* TIMER0 Toggle Output 4 */ +#define K210_PCF_TIMER1_TOGGLE1 194 /* TIMER1 Toggle Output 1 */ +#define K210_PCF_TIMER1_TOGGLE2 195 /* TIMER1 Toggle Output 2 */ +#define K210_PCF_TIMER1_TOGGLE3 196 /* TIMER1 Toggle Output 3 */ +#define K210_PCF_TIMER1_TOGGLE4 197 /* TIMER1 Toggle Output 4 */ +#define K210_PCF_TIMER2_TOGGLE1 198 /* TIMER2 Toggle Output 1 */ +#define K210_PCF_TIMER2_TOGGLE2 199 /* TIMER2 Toggle Output 2 */ +#define K210_PCF_TIMER2_TOGGLE3 200 /* TIMER2 Toggle Output 3 */ +#define K210_PCF_TIMER2_TOGGLE4 201 /* TIMER2 Toggle Output 4 */ +#define K210_PCF_CLK_SPI2 202 /* Clock SPI2 */ +#define K210_PCF_CLK_I2C2 203 /* Clock I2C2 */ +#define K210_PCF_INTERNAL0 204 /* Internal function signal 0 */ +#define K210_PCF_INTERNAL1 205 /* Internal function signal 1 */ +#define K210_PCF_INTERNAL2 206 /* Internal function signal 2 */ +#define K210_PCF_INTERNAL3 207 /* Internal function signal 3 */ +#define K210_PCF_INTERNAL4 208 /* Internal function signal 4 */ +#define K210_PCF_INTERNAL5 209 /* Internal function signal 5 */ +#define K210_PCF_INTERNAL6 210 /* Internal function signal 6 */ +#define K210_PCF_INTERNAL7 211 /* Internal function signal 7 */ +#define K210_PCF_INTERNAL8 212 /* Internal function signal 8 */ +#define K210_PCF_INTERNAL9 213 /* Internal function signal 9 */ +#define K210_PCF_INTERNAL10 214 /* Internal function signal 10 */ +#define K210_PCF_INTERNAL11 215 /* Internal function signal 11 */ +#define K210_PCF_INTERNAL12 216 /* Internal function signal 12 */ +#define K210_PCF_INTERNAL13 217 /* Internal function signal 13 */ +#define K210_PCF_INTERNAL14 218 /* Internal function signal 14 */ +#define K210_PCF_INTERNAL15 219 /* Internal function signal 15 */ +#define K210_PCF_INTERNAL16 220 /* Internal function signal 16 */ +#define K210_PCF_INTERNAL17 221 /* Internal function signal 17 */ +#define K210_PCF_CONSTANT 222 /* Constant function */ +#define K210_PCF_INTERNAL18 223 /* Internal function signal 18 */ +#define K210_PCF_DEBUG0 224 /* Debug function 0 */ +#define K210_PCF_DEBUG1 225 /* Debug function 1 */ +#define K210_PCF_DEBUG2 226 /* Debug function 2 */ +#define K210_PCF_DEBUG3 227 /* Debug function 3 */ +#define K210_PCF_DEBUG4 228 /* Debug function 4 */ +#define K210_PCF_DEBUG5 229 /* Debug function 5 */ +#define K210_PCF_DEBUG6 230 /* Debug function 6 */ +#define K210_PCF_DEBUG7 231 /* Debug function 7 */ +#define K210_PCF_DEBUG8 232 /* Debug function 8 */ +#define K210_PCF_DEBUG9 233 /* Debug function 9 */ +#define K210_PCF_DEBUG10 234 /* Debug function 10 */ +#define K210_PCF_DEBUG11 235 /* Debug function 11 */ +#define K210_PCF_DEBUG12 236 /* Debug function 12 */ +#define K210_PCF_DEBUG13 237 /* Debug function 13 */ +#define K210_PCF_DEBUG14 238 /* Debug function 14 */ +#define K210_PCF_DEBUG15 239 /* Debug function 15 */ +#define K210_PCF_DEBUG16 240 /* Debug function 16 */ +#define K210_PCF_DEBUG17 241 /* Debug function 17 */ +#define K210_PCF_DEBUG18 242 /* Debug function 18 */ +#define K210_PCF_DEBUG19 243 /* Debug function 19 */ +#define K210_PCF_DEBUG20 244 /* Debug function 20 */ +#define K210_PCF_DEBUG21 245 /* Debug function 21 */ +#define K210_PCF_DEBUG22 246 /* Debug function 22 */ +#define K210_PCF_DEBUG23 247 /* Debug function 23 */ +#define K210_PCF_DEBUG24 248 /* Debug function 24 */ +#define K210_PCF_DEBUG25 249 /* Debug function 25 */ +#define K210_PCF_DEBUG26 250 /* Debug function 26 */ +#define K210_PCF_DEBUG27 251 /* Debug function 27 */ +#define K210_PCF_DEBUG28 252 /* Debug function 28 */ +#define K210_PCF_DEBUG29 253 /* Debug function 29 */ +#define K210_PCF_DEBUG30 254 /* Debug function 30 */ +#define K210_PCF_DEBUG31 255 /* Debug function 31 */ + +#define K210_FPIOA(pin, func) (((pin) << 16) | (func)) + +#define K210_PC_POWER_3V3 0 +#define K210_PC_POWER_1V8 1 + +#endif /* PINCTRL_K210_FPIOA_H */