@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-TEST_PROGS := gpio-mockup.sh
+TEST_PROGS := gpio-mockup.sh gpio-sim.sh
TEST_FILES := gpio-mockup-sysfs.sh
TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev gpio-chip-info gpio-line-name
@@ -1,3 +1,4 @@
CONFIG_GPIOLIB=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_MOCKUP=m
+CONFIG_GPIO_SIM=m
new file mode 100755
@@ -0,0 +1,229 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+BASE_DIR=`dirname $0`
+CONFIGFS_DIR="/sys/kernel/config/gpio-sim"
+PENDING_DIR=$CONFIGFS_DIR/pending
+LIVE_DIR=$CONFIGFS_DIR/live
+MODULE="gpio-sim"
+
+fail() {
+ echo "$*" >&2
+ echo "GPIO $MODULE test FAIL"
+ exit 1
+}
+
+skip() {
+ echo "$*" >&2
+ echo "GPIO $MODULE test SKIP"
+ exit 4
+}
+
+configfs_cleanup() {
+ for DIR in `ls $LIVE_DIR`; do
+ mv $LIVE_DIR/$DIR $PENDING_DIR
+ done
+
+ for DIR in `ls $PENDING_DIR`; do
+ rmdir $PENDING_DIR/$DIR
+ done
+}
+
+create_pending_chip() {
+ local NAME="$1"
+ local LABEL="$2"
+ local NUM_LINES="$3"
+ local LINE_NAMES="$4"
+ local CHIP_DIR="$PENDING_DIR/$NAME"
+
+ mkdir $CHIP_DIR
+ test -n "$LABEL" && echo $LABEL > $CHIP_DIR/label
+ test -n "$NUM_LINES" && echo $NUM_LINES > $CHIP_DIR/num_lines
+ if [ -n "$LINE_NAMES" ]; then
+ echo $LINE_NAMES 2> /dev/null > $CHIP_DIR/line_names
+ # This one can fail
+ if [ "$?" -ne "0" ]; then
+ return 1
+ fi
+ fi
+}
+
+create_live_chip() {
+ local CHIP_DIR="$PENDING_DIR/$1"
+
+ create_pending_chip "$@" || fail "unable to create the chip configfs item"
+ mv $CHIP_DIR $LIVE_DIR || fail "unable to commit the chip configfs item"
+}
+
+remove_pending_chip() {
+ local NAME="$1"
+
+ rmdir $PENDING_DIR/$NAME || fail "unable to remove the chip configfs item"
+}
+
+remove_live_chip() {
+ local NAME="$1"
+
+ mv $LIVE_DIR/$NAME $PENDING_DIR || fail "unable to uncommit the chip configfs item"
+ remove_pending_chip "$@"
+}
+
+configfs_chip_name() {
+ local CHIP="$1"
+
+ cat $LIVE_DIR/$CHIP/chip_name 2> /dev/null || return 1
+}
+
+configfs_dev_name() {
+ local CHIP="$1"
+
+ cat $LIVE_DIR/$CHIP/dev_name 2> /dev/null || return 1
+}
+
+get_chip_num_lines() {
+ local CHIP="$1"
+
+ $BASE_DIR/gpio-chip-info /dev/`configfs_chip_name $CHIP` num-lines
+}
+
+get_chip_label() {
+ local CHIP="$1"
+
+ $BASE_DIR/gpio-chip-info /dev/`configfs_chip_name $CHIP` label
+}
+
+get_line_name() {
+ local CHIP="$1"
+ local OFFSET="$2"
+
+ $BASE_DIR/gpio-line-name /dev/`configfs_chip_name $CHIP` $OFFSET
+}
+
+sysfs_set_pull() {
+ local CHIP="$1"
+ local OFFSET="$2"
+ local PULL="$3"
+ local SYSFSPATH="/sys/devices/platform/`configfs_dev_name $CHIP`/line-ctrl/gpio$OFFSET"
+
+ echo $PULL > $SYSFSPATH
+}
+
+# Load the gpio-sim module. This will pull in configfs if needed too.
+modprobe gpio-sim || skip "unable to load the gpio-sim module"
+# Make sure configfs is mounted at /sys/kernel/config. Wait a bit if needed.
+for IDX in `seq 5`; do
+ if [ "$IDX" -eq "5" ]; then
+ skip "configfs not mounted at /sys/kernel/config"
+ fi
+
+ mountpoint -q /sys/kernel/config && break
+ sleep 0.1
+done
+# If the module was already loaded: remove all previous chips
+configfs_cleanup
+
+trap "exit 1" SIGTERM SIGINT
+trap configfs_cleanup EXIT
+
+echo "1. chip_name and dev_name attributes"
+
+echo "1.1. Chip name is communicated to user"
+create_live_chip chip
+test -n `cat $LIVE_DIR/chip/chip_name` || fail "chip_name doesn't work"
+remove_live_chip chip
+
+echo "1.2. chip_name returns 'none' if the chip is still pending"
+create_pending_chip chip
+test "`cat $PENDING_DIR/chip/chip_name`" = "none" || fail "chip_name doesn't return 'none' for a pending chip"
+remove_pending_chip chip
+
+echo "1.3. Device name is communicated to user"
+create_live_chip chip
+test -n `cat $LIVE_DIR/chip/dev_name` || fail "dev_name doesn't work"
+remove_live_chip chip
+
+echo "1.4. dev_name returns 'none' if chip is still pending"
+create_pending_chip chip
+test "`cat $PENDING_DIR/chip/dev_name`" = "none" || fail "dev_name doesn't return 'none' for a pending chip"
+remove_pending_chip chip
+
+echo "2. Creating simulated chips"
+
+echo "2.1. Default number of lines is 1"
+create_live_chip chip
+test "`get_chip_num_lines chip`" = "1" || fail "default number of lines is not 1"
+remove_live_chip chip
+
+echo "2.2. Number of lines can be specified"
+create_live_chip chip test-label 16
+test "`get_chip_num_lines chip`" = "16" || fail "number of lines is not 16"
+remove_live_chip chip
+
+echo "2.3. Label can be set"
+create_live_chip chip foobar
+test "`get_chip_label chip`" = "foobar" || fail "label is incorrect"
+remove_live_chip chip
+
+echo "2.4. Label can be left empty"
+create_live_chip chip
+test -z "`cat $LIVE_DIR/chip/label`" || fail "label is not empty"
+remove_live_chip chip
+
+echo "2.5. Line names can be configured"
+create_live_chip chip test-label 16 '"foo", "", "bar"'
+test "`get_line_name chip 0`" = "foo" || fail "line name is incorrect"
+test "`get_line_name chip 2`" = "bar" || fail "line name is incorrect"
+remove_live_chip chip
+
+echo "2.6. Errors in line names are detected"
+create_pending_chip chip test-label 8 '"foo", bar' && fail "incorrect line name accepted"
+remove_pending_chip chip
+create_pending_chip chip test-label 8 '"foo" "bar"' && fail "incorrect line name accepted"
+remove_pending_chip chip
+
+echo "2.7. Multiple chips can be created"
+create_live_chip chip0
+create_live_chip chip1
+create_live_chip chip2
+remove_live_chip chip0
+remove_live_chip chip1
+remove_live_chip chip2
+
+echo "3. Controlling simulated chips"
+
+echo "3.3. Pull can be set over sysfs"
+create_live_chip chip test-label 8
+sysfs_set_pull chip 0 1
+$BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip` 0
+test "$?" = "1" || fail "pull set incorrectly"
+sysfs_set_pull chip 0 0
+$BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip` 1
+test "$?" = "0" || fail "pull set incorrectly"
+remove_live_chip chip
+
+echo "3.4. Incorrect input in sysfs is rejected"
+create_live_chip chip test-label 8
+SYSFS_PATH="/sys/devices/platform/`configfs_dev_name chip`/line-ctrl/gpio0"
+echo 2 > $SYSFS_PATH 2> /dev/null && fail "invalid input not detectec"
+remove_live_chip chip
+
+echo "4. Simulated GPIO chips are functional"
+
+echo "4.1. Values can be read from sysfs"
+create_live_chip chip test-label 8
+SYSFS_PATH="/sys/devices/platform/`configfs_dev_name chip`/line-ctrl/gpio0"
+test `cat $SYSFS_PATH` = "0" || fail "incorrect value read from sysfs"
+$BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip` 0 &
+sleep 0.1 # FIXME Any better way?
+test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs"
+kill $!
+remove_live_chip chip
+
+echo "4.2. Bias settings work correctly"
+create_live_chip chip test-label 8
+$BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip` 0
+test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work"
+remove_live_chip chip
+
+echo "GPIO $MODULE test PASS"